Junsun CarPlay Android Auto Interface Adapter

Contents

Junsun Wireless CarPlay Android Auto Interface Adapter User Manual

Model: CarPlay Android Auto Interface Adapter

Brand: Junsun

1. Introduction

This manual provides detailed instructions for the installation, operation, and troubleshooting of your Junsun Wireless CarPlay Android Auto Interface Adapter. This device integrates advanced smartphone connectivity features into your Mercedes Benz vehicle's original infotainment system, supporting NTG 4.0, NTG 4.5, and NTG 5.0 systems.

The adapter allows you to use Wireless CarPlay, Wireless Android Auto, AirPlay, AutoLink, and supports various multimedia functions while retaining your car's original features and controls.

2. Safety Information

  • Ensure the vehicle is turned off and the ignition is disengaged before beginning any installation procedures.
  • If you are unsure about any installation step, it is recommended to seek professional assistance.
  • Do not operate the device or adjust settings in a way that distracts you from driving. Always prioritize road safety.
  • Keep all cables clear of moving parts and heat sources within the vehicle.

3. Package Contents

Please check the package to ensure all items are present:

Kit Contents

Image: Junsun CarPlay Module and its components.

  • CarPlay Decoder Box
  • Power Cable Harness
  • LVDS Cable
  • WiFi Antenna
  • USB-AV Cable
  • AMI Cable (if applicable)

4. Specifications

FeatureDescription
BrandJunsun
Supported FunctionsWireless CarPlay, Wireless Android Auto, AirPlay, AutoLink, Front View Camera DVR (CVBS input), USB Play (music, video), Factory and Aftermarket Camera Support
Applicable Car ModelsMercedes Benz C Class W204 (2009-2011), GLK (2009-2012), E Class Coupe C207 (2009-2011), E Class W212 (2009-2011), SLK R171 (2009-2012)
Supported NTG SystemsNTG 4.0, NTG 4.5, NTG 5.0
Original Car FunctionsRetained (Radio, Amplifier, Joystick Control, Rear View, Steering Wheel Buttons)

5. Setup and Installation

5.1 Distinguishing NTG Versions

It is crucial to identify your car's NTG system version (4.0, 4.5, or 5.0) as connections and settings may vary. Refer to the image below for visual guidance:

Distinguishing NTG Versions

Image: Visual guide to distinguish NTG 4.0, 4.5, and 5.0 systems by console buttons and LVDS ports.

  • NTG 4.0: Typically features a C/CLR button and a specific LVDS port type.
  • NTG 4.5: Features a CLEAR button and a different LVDS port type.
  • NTG 5.0: Features a distinct console layout and LVDS port.

5.2 Toggle Switch (DIP) Setup

The decoder box has toggle switches that need to be set according to your car's screen size.

5.2.1 Locating the Toggle Switches

Toggle Switch Location

Image: Location of the toggle (DIP) switches on the CarPlay decoder box.

The toggle switches are located on the side of the CarPlay decoder box, usually near the LVDS port.

5.2.2 Setting the Switches

Adjust the switches based on your car's screen size (5.8-inch or 7-inch). Refer to the diagram below:

Toggle Switch Settings

Image: DIP switch settings for 5.8-inch (400x240) and 7-inch (800x480) screens.

  • For 5.8-inch screen (400x240): Follow 'setup 1' in the diagram.
  • For 7-inch screen (800x480): Follow 'setup 2' in the diagram.

5.3 Cable Connection Chart

Follow this detailed wiring diagram carefully for all connections. This is a critical step for proper functionality.

Cable Connection Chart

Image: Comprehensive wiring diagram showing connections for power, CAN, LVDS, USB, video inputs, and microphone.

5.4 Power Cable Connection

  1. Unplug the OEM original power cable from the head unit.
  2. Reconnect the OEM power cable to the new cable harness provided.
  3. Plug the new cable harness into the head unit.
  4. Fiber Optic Cable (if present): If your car has a fiber optic cable, you must move the original fiber optic cable from the OEM connector to the new harness. Refer to the image below for guidance.
Power Cable and Fiber Optic Connection

Image: Details on connecting the power cable and transferring fiber optic cables to the new harness.

5.5 WiFi Antenna and USB-AV Cable Connection

Connect the WiFi antenna and USB-AV cable to their respective ports on the CarPlay decoder box.

WiFi Antenna and USB-AV Connection

Image: Connection points for the WiFi antenna and USB-AV cable on the decoder box.

5.6 Decoder Box Installation Location

The CarPlay interface decoder box should be installed in an appropriate space near, or on, the OEM head unit. Ensure it is secure and does not interfere with other components.

Decoder Box Installation Locations

Image: Examples of suitable installation locations for the decoder box, either on or beside the OEM head unit.

6. Operating Instructions

6.1 Functional Overview

  • CarPlay / Android Auto: Built-in vehicle interaction system for iPhone/Android, supporting voice commands (Siri/Google Assistant) for phone, navigation, music, and more. Supports wireless and wired connections.
  • Reversing Video Input: Smart module decodes video for rear-view cameras.
  • Mirroring: Supports wired & wireless mirroring for iPhone (AirPlay) and Android phones (AutoLink).
  • USB Video Playback: Automatic media playback from a USB drive.

6.2 Switching to CarPlay/Android Auto Interface

To enter the CarPlay decoder interface:

  1. Ensure your original OEM Mercedes system is on the Bluetooth audio page.
  2. Long press the "back" button (usually a curved arrow) on your car console mouse.
OEM Control Buttons

Image: Mercedes console mouse and steering wheel buttons.

6.3 Supported Car Controls

The CarPlay interface decoder box supports the following original car controls:

  • Voice Control button
  • Telephone button
  • Volume "+" and "-" buttons

Other buttons on the steering wheel or console may not be supported.

6.4 Wireless CarPlay Connection

  1. On the adapter's interface, go to "SmartPhone Setting" and ensure "CarPlay" is ON.
  2. Select "Bluetooth".
  3. Check the Bluetooth device name (e.g., "CAR-xxxx").
  4. On your iPhone, go to Settings > Bluetooth.
  5. Turn on WiFi and keep it on.
  6. Connect to the Bluetooth device named "CAR-xxxx".
  7. When prompted, select "Pair" and then "Use CarPlay".
Wireless CarPlay Connection Steps

Image: Screenshots illustrating the steps for wireless CarPlay connection.

6.5 Apple Wireless Screen Mirroring (AirPlay)

  1. On the adapter's interface, go to "SmartPhone Setting" and ensure "AirPlay" is ON.
  2. On your iPhone, go to Settings > WLAN (Wi-Fi).
  3. Connect to the Wi-Fi network named "CAR-WIFI-XXX". The password is usually 66668888.
  4. After successful Wi-Fi connection, return to your iPhone's main interface.
  5. Open the Control Center (swipe down from top-right or up from bottom).
  6. Tap "Screen Mirroring" and select "AirPlay" from the list.
Apple Wireless Screen Mirroring Steps

Image: Screenshots illustrating the steps for Apple wireless screen mirroring (AirPlay).

6.6 Wireless Android Auto Connection

  1. On the adapter's interface, go to "SmartPhone Setting" and ensure "AndroidAuto" is ON.
  2. Select "Bluetooth".
  3. Check the Bluetooth name starting with "CAR-xxx".
  4. On your Android phone, go to Settings > Bluetooth.
  5. Select the Bluetooth device named "CAR-xxx" and click "Pairing" when prompted.
  6. Once paired, open the Android Auto app on your phone, and the system should connect automatically.
Wireless Android Auto Connection Steps

Image: Screenshots illustrating the steps for wireless Android Auto connection.

  1. On the adapter's interface, go to "SmartPhone Setting" and ensure "AutoLink" is ON.
  2. On your Android phone, scan the QR code displayed on the car screen to download and install the AutoLink app.
  3. Open the AutoLink app on your phone.
  4. Search for "CAR-WIFI-XXXX" and connect to it.
  5. Click "START NOW" on the phone prompt box.
  6. Ensure your phone's media sound is connected via Bluetooth to the car system.
Android Wireless Screen Mirroring Steps

Image: Screenshots illustrating the steps for Android wireless screen mirroring (AutoLink).

6.8 Audio Settings (Call Echo Cancellation)

If you experience echo during phone calls:

  1. Navigate to Settings > Audio > AEC Delay.
  2. Click the button "Start Auto AEC".
  3. Ensure the car is quiet during this process.
  4. Set the volume to a moderate position.
  5. Wait 20 seconds for the estimation to complete.
Audio Settings and Echo Cancellation

Image: Screenshots of audio settings menu and call echo cancellation option.

6.9 AUX Activation and Aircondition Type

  • AUX Activation (NTG 4.5 Only): If your car does not have an AUX item, insert the AMI cable and click "AUX Activation". If AUX is present, ignore this step.
  • Aircondition Type: If the air conditioner fan speed or other information does not match your car, change the setting to "Type B".
AUX Activation and Aircondition Type Settings

Image: Screenshots of car settings menu for AUX activation and aircondition type.

7. Maintenance

The Junsun Wireless CarPlay Android Auto Interface Adapter requires minimal maintenance.

  • Keep the decoder box and cables free from dust and debris.
  • Do not expose the device to extreme temperatures or moisture.
  • Avoid using harsh chemicals for cleaning; a soft, dry cloth is sufficient.

8. Troubleshooting

Common Issues and Solutions:

  • Poor Screen Resolution: The resolution displayed by the adapter is limited by your original car screen's resolution. This product cannot improve the native resolution of your car's display.
  • Poor JBL Sound System Performance: The product transmits audio through the OEM car radio's AUX channel. It cannot directly utilize the JBL transmission system, which may result in suboptimal performance with JBL sound systems.
  • Slow Connection: This is often due to improper antenna placement. Ensure the WiFi antenna is placed in an area with minimal obstructions and away from metal surfaces to ensure a strong signal.
  • No Display/No Sound:
    • Check all cable connections, especially the LVDS and power cables, to ensure they are securely seated.
    • Verify the toggle switch settings match your screen size.
    • Ensure the car's audio input is set to AUX.
  • CarPlay/Android Auto Not Launching:
    • Confirm your phone's Bluetooth and Wi-Fi are on and connected correctly.
    • Try restarting your phone and the car's infotainment system.
    • Ensure the adapter's settings for CarPlay/Android Auto are enabled.

9. User Tips

  • For the best wireless performance, ensure your phone's Wi-Fi is always enabled when using CarPlay or Android Auto, even if it's primarily connecting via Bluetooth.
  • Regularly check for firmware updates from Junsun to ensure optimal performance and compatibility.
  • If you experience any audio lag, try adjusting the audio delay settings within the adapter's menu.

10. Warranty and Support

Junsun products are designed for reliability and performance. For any warranty claims, technical support, or further assistance, please contact your original seller or Junsun customer service. Please have your order ID, car model, year, screen size, toggle switch setup, and pictures of LVDS cable connections ready when contacting support.

A user manual PDF may be available for download from the seller's product page for additional reference.

© 2023 Junsun. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.