Introduction
The LiitoKala Lii-ND20 is a professional, high-capacity smart battery charger designed for efficient and safe charging of Ni-MH AA, AAA, and 9V rechargeable batteries. Featuring 20 independent charging slots for AA/AAA batteries and two dedicated slots for 9V batteries, it offers intelligent charging control, real-time LCD monitoring, and multiple safety protections. Its slim design and universal voltage compatibility make it an ideal solution for various professional and personal uses.

Safety Precautions
⚠️ Please mind potential fire risk and strictly follow the instruction manual for charging and storage.
- This product is designed exclusively for Ni-MH batteries. Do not attempt to charge disposable batteries (e.g., alkaline or zinc-carbon batteries) to avoid damage or injury.
- Keep the charger away from rain, moisture, or any liquids.
- Discontinue use immediately if the charger appears damaged, punctured, or shows any signs of malfunction.
- Always unplug the power cord from the outlet before cleaning the charger to prevent electric shock.
- Do not use leaking, corroded, or damaged batteries in the charger.
- For any repairs, contact a qualified technician. Do not attempt to disassemble or self-repair the charger.
- Disconnect the power supply when the charger is not in use.
- Store the charger in a dry, cool place when idle.
Setup Guide
- Unpack the Charger: Carefully remove the LiitoKala Lii-ND20 charger and its power cable from the packaging.
- Connect Power: Insert the power cable into the charger's power input port, then plug the other end into a standard AC power outlet (100-240V, 50/60Hz).
- Initial Check: The LCD display should briefly illuminate, indicating the charger is powered on and ready for use.

Operating Instructions
Inserting Batteries
- Identify Battery Type: The charger supports AA, AAA, and 9V Ni-MH/Ni-CD rechargeable batteries.
- Insert AA/AAA Batteries: For AA and AAA batteries, slide them into any of the 20 independent slots, ensuring correct polarity (+ and - ends match the markings in the slot).
- Insert 9V Batteries: For 9V batteries, use the two dedicated 9V charging ports, ensuring correct polarity.

Charging Process and Indicators
The Lii-ND20 features intelligent charging control, adapting to each battery's needs for optimal efficiency. Each slot operates independently, meaning the charging performance of one battery does not affect others.
LCD Display Indicators:
- For AA/AAA Batteries:
- The LCD screen displays 4 battery-level segments for each slot.
- A flowing display (segments animating) indicates normal charging is in progress.
- When fully charged, all 4 segments will remain steadily lit.
- The display for a slot will turn off when the battery is fully charged and the charger enters standby mode for that slot.
- For 9V Batteries:
- A flowing display indicates normal charging is in progress.
- When fully charged, all segments will remain steadily lit.

The charger is equipped with automatic shut-off functionality once batteries are fully charged, preventing overcharge.
Maintenance
- Cleaning: Unplug the charger from the power source. Use a soft, dry cloth to wipe the exterior of the charger. Do not use abrasive cleaners or solvents. Ensure no moisture enters the charging slots.
- Storage: When not in use, store the charger in a dry, cool place, away from direct sunlight and extreme temperatures.
- Inspection: Periodically inspect the power cable and the charger for any signs of damage. If any damage is found, discontinue use and contact a qualified technician.
Troubleshooting
- Charger not powering on:
- Ensure the power cable is securely plugged into both the charger and a working electrical outlet.
- Check if the power outlet is functional by plugging in another device.
- Battery not charging:
- Verify that the battery is inserted with the correct polarity (+ and -).
- Ensure the battery is a compatible Ni-MH AA, AAA, or 9V rechargeable type. Disposable batteries are not supported.
- Check if the battery is damaged, corroded, or leaking. Do not attempt to charge such batteries.
- Try the battery in a different slot to rule out a faulty slot.
- LCD display not showing activity:
- If the battery is fully charged, the display for that slot will turn off. Remove and re-insert the battery to confirm if it's fully charged or if there's an issue.
- If multiple slots show no activity, refer to "Charger not powering on" steps.
- Unusual heat or smell:
- Immediately unplug the charger and remove all batteries.
- This could indicate a serious issue. Do not use the charger again and contact customer support or a qualified technician.
Technical Specifications
| Feature | Specification |
|---|---|
| Model Number | Lii-ND20 |
| Input Voltage | AC 100-240V, 50/60Hz |
| Output Voltage (AA/AAA) | DC 1.48V x 20 channels |
| Output Voltage (9V) | DC 9.0V |
| Output Current (AA/AAA) | 400mA per channel × 20 channels |
| Output Current (9V) | 40mA |
| Compatible Batteries | AA, AAA, 9V Ni-MH/Ni-CD rechargeable batteries |
| Number of Slots | 20 (AA/AAA) + 2 (9V) |
| Charge Termination | Multi-protection via ΔV/Δt, -ΔV, 0Δv, and max voltage detection |
| Dimensions (L x W x H) | 260mm x 205mm x 30mm |
| Certifications | CE, FCC, RoHS |
| Intelligent Charge | Yes |
| Quick Charge | Yes |
| Display Screen | LCD (Blue Backlit) |

User Tips
- Polarity Check: Always double-check the battery polarity before inserting them into the charger slots. Incorrect insertion can prevent charging or damage the batteries/charger.
- Battery Health: For optimal battery life and charging efficiency, avoid fully discharging your Ni-MH batteries before recharging. It's generally better to recharge them when they are partially depleted.
- Clean Contacts: Periodically clean the metal contacts on both your batteries and the charger slots with a dry, soft cloth to ensure good electrical connection and efficient charging.
- Ventilation: While the charger has a slim design, ensure it is placed in a well-ventilated area during operation to prevent heat buildup.
Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
A user manual in PDF format may be available for download from the manufacturer's website or by contacting customer support. (Reference: User manual (PDF))