Yaber P20 Cordless Vacuum Cleaner User Manual

Introduction

The Yaber P20 Cordless Vacuum Cleaner is designed for efficient home cleaning, featuring a powerful brushless motor, advanced filtration, and a lightweight, versatile design. This manual provides essential information for safe operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

Safety Warnings

• This product is not intended for children.
• If anyone else uses this product, make sure to remind them to read this manual and fully understand how to use this product.
• Before using this product, please remove all packaging and untie the cables.
• Do not disassemble this product without authorization to avoid unexpected dangers. If you need maintenance, please contact customer service.
• If this product has been violently shocked, dropped, or otherwise damaged, do not use it and take it to service personnel.
• Do not place this product near heat sources such as fire or stoves.
• Do not use this product near flammable gases or liquids.
• Do not put this product on flammable objects such as carpets, paper, cardboard, etc. When product is running, please keep it away from items which may be affected by high temperature, such as blankets, pillows, mattresses, etc.
• Do not expose this product to any liquids, do not immerse this product in water or even get it wet. Do not use this product in rain or humid environment.
• This product becomes hot during use and must be properly ventilated. Please ensure that there is at least 7.5 cm of space around the product.
• When using this product, please follow the required temperature in this manual. If the temperature is too high, the battery may get on fire. If it is too low, this product will work undesirably or even cannot work. If this product exudes peculiar smell or heat when using, please switch it off and place it in one open place for observation. After confirming safety, please contact the manufacturer or dealer of this product.
• Do not place other heavy objects on the top of this product.
• Do not forcibly block the fan when using, or leave this product in one stuffy or dusty space.
• Do not use this product in environments with strong static electricity or strong magnetic field.
• Do not use this product at an altitude exceeding 2000m.
• AC output of this product is 100V-240V, do not insert your fingers or any hand-held metal conductors into the AC output socket.
• Do not short-circuit the output of this product.
• Please match power station model according to electrical equipment power. It is forbidden to use this product with excessive power or overload.
• Do not use this product with damaged power strips or plugs. If damaged, replace power strips or plugs immediately.
• Do not charge this product with any damaged charging cables.
• Please charge this product with the charger in product package.
• Please choose solar panel charging according to the electrical parameters specified in this manual.
• To minimize the risk of electric-shock, turn off and unplug this product before maintenance or cleaning.

Package Contents

Verify that all items are present in the package:

• Main Engine x1
• Adjustable Extension Tube x1
• Floor Brush x1
• 2-in-1 Brush x1
• Sofa Brush x1
• Wall Mount x1
• Hose x1
• Mini Cleaning Brush x1
• User Manual x1

Product Overview

Familiarize yourself with the components of your Yaber P20 Cordless Vacuum Cleaner.

Detail Illustrations

1. Main Power Switch
2. Display Screen
3. USB Output Switch
4. DC Output Switch
5. Car Charging Output Port
6. AC Output Switch
7. AC Output Socket
8. DC Output Port
9. USB-A1 Output Port
10. USB-A2 Output Port
11. USB-C Port
12. DC Input Port
13. LED Light Switch
14. AC input terminal of the plum blossom

* The AC socket, AC output voltage and frequency will be different in different countries or regions, please refer to actual product!

Display Screen

The LED display provides real-time information about the vacuum's status.

1. DC output
2. USB output
3. LED lights
4. AC output
5. Frequency
6. Remaining time
7. Fault flags
8. Remaining Electricity (%)
9. Input/output power

* When not using this product, please turn it off.

* The input power and output power displayed may be different from the actual. This is for your reference only!

Setup and Assembly

Assemble the vacuum cleaner components as follows:

1. Attach the Adjustable Extension Tube to the Main Engine.
2. Connect the desired Floor Brush or other accessories (Sofa Brush, 2-in-1 Brush) to the end of the extension tube or directly to the main engine for handheld use.
3. Ensure all connections are secure before operation.
4. For storage, the vacuum features a convenient freestanding design, allowing it to stand upright without wall support.

Operating Instructions

Power On/Off

1. Gently short press the general switch button to switch this product on/off and activate the screen.
2. After starting up, if there is no operation for 30 seconds, this product will automatically turn off.
3. Switching off the general switch button will turn off all functions.

* In charging (input) mode, the general switch button will be disabled.

USB Output

1. After starting up, gently short press the USB switch to switch on the USB output function, and the screen will show "USB-out".
2. Plug the USB-A cable into the USB-A port to charge electric appliances.
3. Plug the USB-C cable into the USB-C port to charge electric appliances.
4. After using, gently short press the USB switch to turn off the USB output, then unplug the USB cable.

* When USB output function is running for 6 hours (or even longer) with no load, the USB output function will be automatically turned off.

LED Light

1. Gently short press the LED light switch to turn on the LED light.
2. Keep short pressing the LED light switch to switch LED light modes into weak, medium, strong, SOS, strobe, and off.
3. Firmly long press the LED light switch to turn off the LED light.

* The LED light will automatically turn off after continuously working for 12 hours.

AC Output

1. After starting up, long press the AC output switch for 3 seconds to turn on AC output function, "AC-out" will be displayed on the screen.
2. Plug off-mode AC electric devices into the AC output socket, and then turn on electric devices.
3. After use, long press the AC output switch for 3 seconds to turn off AC output function, then unplug electric devices.

• When remaining electricity (%) is less than 5%, the AC output will be turned off automatically.
• When AC output function is running with no load for 6 hours (even more), the AC output will be automatically turned off.
• Short press AC output switch for 3 times to switch frequency from 50Hz to 60Hz (or 60Hz to 50Hz).
• When not using AC output function, please turn off AC output switch to save electricity.
• AC voltage and socket specifications are different in different countries or regions. Before use, please confirm whether this product can fit with your electric devices or not.

DC Output

1. After starting up, gently short press the DC output switch to turn on DC output function, and "DC-out" will be displayed on the screen.
2. Connect off-mode DC electric devices to the DC output port, and then turn on DC electric devices.
3. Connect off-mode DC electric devices to the car charging output port, and then turn on DC electric devices.
4. After use, short press the DC output switch to turn off DC output function, then unplug DC electric devices.

* When DC output function is running with no load for 6 hours (even more), the DC output function will be automatically turned off.

Charging/Discharging

1. In the shutdown state, insert the power cable into the DC charging port. All symbols on the display light up.
2. The AC power supply supports up to 100W power supply and the DC power supply supports up to 90W power supply, both of which can be fully charged in 70 minutes.
3. When discharging, the screen is on to show remaining discharge time, output wattage and remaining electricity (%). It will automatically adjust its remaining discharge time according to output wattage. Speed according to temperature and discharging power.

• Please charge this product immediately after purchasing.
• Please recharge this product when remaining electricity (%) is below 20%, to maintain good performance and extend product lifespan.
• Do not charge this product with the output of itself.
• Do not fully discharge the battery, to avoid shortening battery lifespan.
• When warning sign of high/low temperature protection appears on the screen, please stop using product and shut it down immediately.
• Note: Due to the characteristics of the battery, the discharge protection time is different from that at normal temperature under 10°C.

AC Charging

1. Plug the AC charging line's AC connector into the AC charging port, and then plug the AC charging line's plug into a standard power outlet.
2. After charging is completed, please first unplug the plug of the AC charging line, and then unplug the charging plug with the AC charging port.

Solar Charging (Optional)

1. Place solar panels under sunlight.
2. Connect the output round plug of the solar panel to the DC charging port, and the charging starts.
3. After charging, please remove the round plug of the solar panel from the DC charging port.

* Do not expose this product to direct sunlight or humid environment.

Maintenance

Dust Cup Emptying

The 0.8L dust cup empties with one click for quick and hygienic disposal of collected debris.

Filter Cleaning

The HEPA filtration system components are fully washable. Regular cleaning helps maintain filtration efficiency and consistent suction power.

Brush Cleaning

The anti-tangle floor brush is designed to minimize hair wrap. Periodically check and clean the brush roll to ensure optimal performance, especially in homes with pets.

Troubleshooting

If you encounter issues with your Yaber P20, refer to the following common problems and solutions:

• No Power: Ensure the battery is charged. Check if the main power switch is turned on.
• Reduced Suction: Check and empty the dust cup. Clean the HEPA filters and ensure they are dry before reinserting. Inspect the brush roll for any tangled hair or debris.
• Vacuum Stops During Use: The battery might be low; recharge it. The vacuum might have overheated; allow it to cool down. Check for blockages in the nozzle or tube.
• LED Display Not Working: Ensure the vacuum is powered on. If the issue persists, contact customer support.
• Abnormal Noise/Smell: Immediately turn off the vacuum. Check for any foreign objects or blockages. If the issue continues after clearing, contact service personnel.

For persistent issues not covered here, please contact Yaber customer support.

Specifications

Power Station Specifications (from PDF)

User Tips

• Regular Filter Cleaning: To maintain strong suction, clean the HEPA filters regularly, especially after heavy use. Ensure they are completely dry before reinstallation.
• Optimize Battery Life: Avoid fully discharging the battery frequently. Recharge the vacuum when the battery level drops below 20% to prolong its lifespan.
• Utilize Accessories: Experiment with the different brushes (Sofa Brush, 2-in-1 Brush) for specific cleaning tasks to maximize efficiency on various surfaces and crevices.
• Smart Mode for Carpets: Use the 'Auto' mode for carpets, as the vacuum can intelligently adjust suction power based on the surface, providing optimal cleaning without manual intervention.
• Freestanding Convenience: Take advantage of the self-standing feature for quick breaks during cleaning or for convenient storage without needing a wall mount every time.

Warranty and Support

Yaber products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the official Yaber website or contact your local distributor. Keep your purchase receipt as proof of purchase for any warranty claims.

For further assistance, please consult the official user manual PDF: Yaber P20 User Manual (PDF)