PRELINGCAR 10.25'' LCD Digital Cluster Dashboard For VW Seat Ibiza 2015-2017 Years MQB

Contents

Prelingcar 10.25'' LCD Digital Cluster Dashboard User Manual

Model: 10.25'' LCD Digital Cluster Dashboard For VW Seat Ibiza 2015-2017 Years MQB

Brand: PRELINGCAR

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Prelingcar 10.25'' LCD Digital Cluster Dashboard. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

Prelingcar 10.25 inch LCD Digital Cluster Dashboard with various UI themes

Figure 1: Prelingcar 10.25'' LCD Digital Cluster Dashboard Overview

Key Features:

  • Linux operating system for stability and fast boot-up (<2 seconds).
  • Supports original vehicle data: Miles/KM, Band Pressure, Oil/Water Temperature, Oil Pressure, Fuel Consumption, Auto Body Balance, etc.
  • Multiple display modes (Simple, Comfort, Technology, Track) and 4 theme colors.
  • CPU: T5 1.5Ghz.
  • Easy Plug and Play installation, no wire cutting required.
  • 12.3 inch HD IPS screen with 1920x720 Resolution.
  • Operating Voltage: 9V-16V; Operating Current: 0.8A-1.5A; Standby Current: less than 3MA.
  • Multi-language support including English, Russian, German, French, Spanish, Italian, Korean, Japanese, Arabic, Turkish.
  • Built-in CarPlay chip for wireless CarPlay/Android Auto functionality, allowing phone content sharing (maps, music, video).
  • Supports HDMI connection for syncing display from an Android player (requires optional HDMI cable + HDMI exchange box).

2. Setup and Installation

2.1 Applicable Models:

This digital cluster is compatible with VW Seat Ibiza MQB models from 2015-2017. It is designed to be compatible regardless of left or right-hand drive and trim levels.

Diagram showing various VW models compatible with the full LCD instrument cluster

Figure 2: Supported VW Models for Full LCD Instrument Cluster

2.2 Pre-Installation Steps:

Before installing the digital cluster, it is crucial to perform the following steps on your original car cluster:

  1. Turn off the winter tires setting.
  2. Set the speed limit alarm to 160 km/h and then turn it off.
  3. Ensure the buzzer of the original car instrument panel remains in the original car motherboard.
Original car dashboard showing settings for speed limit alarm and winter tires

Figure 3: Original Dashboard Settings for Speed Limit Alarm

2.3 Installation Process:

The installation is designed to be non-destructive, retaining original car information functions without requiring wire cutting, soldering, or drilling.

  • Original Motherboard Integration: The new digital cluster integrates the original car motherboard. This allows the new cluster to read original car data and transfer it, ensuring compatibility and safety.
  • Motherboard Removal: Regardless of your VW model, you must remove the original motherboard from your existing instrument cluster and install it into the new digital cluster.
Diagram showing removal of original motherboard and installation into new digital cluster

Figure 4: Original Motherboard Removal and Integration

Illustration of non-destructive installation: unbroken line, solderless, no-drill

Figure 5: Non-Destructive Installation Method

2.4 Installation Video Guides:

For detailed visual instructions, please refer to the following video guides:

3. Operating Instructions

3.1 User Interface and Display Modes:

The digital cluster features a new Golf 8 UI design with multiple dial styles and compatibility with the G7 original UI, offering various choices for personalization.

New Golf 8 UI Design showing multiple dial styles and themes

Figure 6: New Golf 8 UI Design and Classic G7 UI Options

You can choose from 3 or 4 display modes (Simple, Comfort, Technology, Track) and 4 theme colors. The auto-color can also be changed.

3.2 Multi-Language Support:

The system supports multiple languages, including English, Russian, German, French, Spanish, Italian, Korean, Japanese, Arabic, and Turkish. If you require additional languages, please contact support after payment.

Dashboard display showing various language options

Figure 7: Multi-Language Selection

3.3 CarPlay / Android Auto Functionality:

The digital cluster has a built-in CarPlay chip, supporting wireless CarPlay and Android Auto functions. This allows you to share maps, music, and videos directly from your phone to the cluster display.

Dashboard displaying CarPlay interface with phone connected

Figure 8: CarPlay Interconnection Function

3.4 Digital Function Settings:

To access and modify various settings, navigate through the main interface settings to "Advanced settings".

  • Kilometer Setting:
    1. Click on the main interface settings -> Advanced settings.
    2. Enter password "123456" and click "OK".
    3. In the total mileage column, enter the mileage value displayed on the original instrument panel.
    4. Press the confirm button.
  • Model Settings:
    1. Click on the main interface settings -> Advanced settings.
    2. Enter password "123456" and click "OK".
    3. Select the corresponding model in the model selection bar.
  • VW Fuel Tank Capacity Setting:
    1. Click on the main interface settings -> Advanced settings.
    2. Enter password "123456" and click "OK".
    3. Enter 93L in the main fuel tank capacity column.
    4. Click the confirm button.
    5. Enter 45L in the secondary fuel tank capacity column.
    6. Click the confirm button.

3.5 Ambient Lighting:

The digital cluster offers 30 colors of ambient lighting. These changeable colors provide a more immersive experience and synchronize with the existing ambient lighting of your vehicle.

Dashboard showing ambient lighting color options

Figure 9: Ambient Lighting Options

4. Maintenance

4.1 Clearing Maintenance Information:

To clear maintenance information, navigate to the "Subtotal Mileage" section within the settings and select "Clear".

5. Troubleshooting

  • Q: Mobile phone screen casting sometimes does not cast the screen, or cannot find the RK.

    A: The previous connection might not be completely disconnected. Turn off the engine and lock the car for 5 minutes to ensure complete disconnection. Then, restart your phone and try again.

  • Q: Phone casting audio is only heard through the dash, not the car navigation.

    A: This is phone-dependent. Samsung and Huawei phones can wirelessly cast video via WiFi, with audio sent to the center navigation's speaker via Bluetooth. Apple's iOS system is more restricted and does not support separate audio/video output. To resolve, cast the screen to the instrument, then connect your mobile phone's Bluetooth to the center control navigation's Bluetooth.

  • Q: The phone cast and navigation interface cannot be found.

    A: If you see the navigation interface showing a compass, press the multifunction steering wheel's down button to bring up the interface.

  • Q: Why is the mobile phone screen casting only a small piece in the middle, and the display interface is very small?

    A: Pull down the mobile phone's notification bar (like turning on WiFi), close the vertical screen lock function. Enter a navigation map or video software, shake the mobile phone to enable horizontal screen display. In digital UI mode, you can then display full-screen navigation or video. To set this, press the left button on the right side of the square control to find the interface menu, press the down button to choose "digital" mode, and press OK.

  • Q: When the phone is resting on the screen, the dash casting interface also follows the black screen.

    A: This is a mobile phone decision. Some phones (e.g., Samsung, Huawei, Vivo) allow screen casting settings to open the screen casting. If your phone lacks this feature, you can set the phone's off-screen time to be permanently on or longer.

  • Q: Bluetooth and WiFi functionality.

    A: The Bluetooth and WiFi functions are primarily for remote firmware upgrades. Do not make settings changes to these unless instructed by support.

  • Q: Vehicle Selection.

    A: Press the left button on the right side of the multifunctional reassurance disc to find the "Settings" menu. Press the down button to find "Model Selection", press OK. Press the down button to find your vehicle model, press OK to confirm. Turn off the engine and lock the car for two minutes after power on to apply the changes.

  • Q: Time setting.

    A: For PQ platforms, year, month, and day are not directly related. For MQB platforms, time settings are found within the settings menu.

  • Q: PQ tanks are not allowed.

    A: In Settings -> Configuration Calibration -> Manual, adjust downward with the actual tank a little bit until the tank is full.

  • Q: The car dings at some fixed speed above 30.

    A: Set the speed limit alarm in the original mechanical instrumentation to 250 before switching it off.

6. Specifications

Feature Specification
Screen Size 10.25 inches
Resolution 1920x720 HD IPS
Operating System Linux
CPU T5 1.5Ghz
Operating Voltage 9V-16V
Operating Current 0.8A-1.5A
Standby Current Less than 3MA
Material ABS
Item Weight 3.5 kg
Item Height 20 cm
Item Width 30 cm
Item Length 40 cm
Special Features 10.25 inch LED digital display
OEM NO. For VW Seat Ibiza 2015-2017 Years MQB
Country/Region of Manufacture China
Automotive grade chip resistant to high and low temperatures

Figure 10: Automotive Grade Chip for Temperature Resistance

7. User Tips

  • Always perform the pre-installation steps (turning off winter tires and speed limit alarm) on your original cluster to avoid potential issues.
  • If you encounter any mirror screen issues, try restarting your phone and ensuring the previous connection is fully disconnected before attempting to reconnect.
  • For full-screen navigation or video display during phone casting, remember to disable vertical screen lock on your mobile device and ensure it's in horizontal display mode.
  • The Bluetooth and WiFi functions are primarily for system upgrades. Avoid making arbitrary changes to these settings.
  • If you have an Android head unit, consider purchasing the optional HDMI cable and exchange box to enable synchronized display with the digital cluster.

8. Warranty and Support

8.1 Warranty:

The product comes with a 365-day warranty from the date of receipt confirmation. During this period, if the product has a problem, you may be eligible for a free return and refund within 15 days, or a direct replacement of the machine. Please contact customer service first to communicate any issues.

8.2 Firmware and Software Updates:

We are committed to providing innovative hardware and software. We offer free updates for firmware, software, UI, and GPS navigation maps.

8.3 Contact Information:

For any technical problems, questions, or installation assistance, please contact our support team:

  • Email: candicesong1985@163.com
  • WhatsApp Number: +905010825798
  • Skype ID: live:.cid.fd83a6a056155b8f

Our engineer team is available to help with installation. Please feel free to reach out if you need assistance.

A user manual in PDF format is also available for download: Prelingcar Digital Cluster User Manual (PDF)

9. Statement of Compliance

9.1 Disclaimer:

⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.