MEKEDE LA10 Wireless CarPlay Android Auto TV Box User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and troubleshooting of your MEKEDE LA10 Wireless CarPlay Android Auto TV Box. This device integrates advanced multimedia and connectivity features into your BMW vehicle, enhancing your driving experience with smart functionalities.

2. Key Features

• Operating System: Linux System for rapid response and stable performance.
• Connectivity: Supports Wi-Fi and Bluetooth 5.0.
• Smartphone Integration: Supports both wireless and wired Apple CarPlay and Android Auto.
• MirrorLink: Allows screen mirroring from iOS and Android phones.
• Video Resolution: LA9 version supports 720P, LA10 version supports 1080P.
• Camera Support: Compatible with 360-degree surround-view cameras and AHD reversing video.
• Audio Processing: DSP (Digital Signal Processing) functionality available on LA10 versions.
• Streaming Apps: LA10+TV BOX versions support YouTube, Netflix, and other third-party video apps.
• Voice Control: Utilize voice assistants for navigation, calls, and music playback.
• GPS Navigation: Built-in global positioning system with support for various map applications.
• Dual System Switch: Seamlessly switch between the original car system and the CarPlay/Android Auto interface.

3. Vehicle Compatibility

This device is compatible with various BMW Series models and systems. Please refer to the table below to confirm compatibility with your vehicle's system and screen size. If your car model is BMW 6 Series and 535i (CIC system), please contact the seller before purchasing to prevent ordering errors.

4. Package Contents

The package typically includes the following components. Specific items may vary slightly depending on the version (LA9, LA10, LA10+TV BOX) and your car's system (NBT, CIC, CCC, EVO).

• CarPlay Box (Main Module)
• Power Cable
• LVDS Cable
• WiFi Antenna
• Microphone (MIC)
• RCA Cable (for some versions)
• TV Box (Only for LA10+TV BOX versions)

5. Installation Guide

CAUTION: Never turn on the ignition with the factory radio removed. Professional installation is recommended.

5.1. General Connection Steps

1. Connect the CarPlay Module to the original 48PIN plug.
2. Connect the aftermarket camera AV port (if applicable).
3. Add 12V power for the camera (if applicable).
4. Adapt the fiber optic cable as shown in the diagram.
5. Securely place the CarPlay Box.
6. Reassemble the car's dashboard components.

5.2. Installation Demonstration Video

Watch this video for a visual guide on the installation process:

5.3. Wiring Details

• Yellow: B+ (Battery Positive)
• Red: ACC (Accessory Power)
• Black: GND (Ground)
• Blue: Camera Power Supply
• Brown: Rear Detect - Connect to the rearview light cable or 360 panoramic detection cable.
• White and Black: 360-RX - Connected to 360 panoramic universal box TXD.
• MIC: Extra MIC interface.
• REAR-CVBS: Connect to rearview camera or 360 panoramic AHD output.
• FRONT-CVBS: Connect to the frontview camera.
• AUX: Audio output.
• USB: Connect mobile phone, USB flash drive, software upgrade.

6. Dip Switch Configuration

The dip switches configure the device for your specific car model and screen size. Ensure the CarPlay POWER is disconnected when adjusting the dip switches. Once set, then connect CarPlay POWER.

7. Operation

7.1. Wireless CarPlay Connection

1. On your iPhone, open Wi-Fi and Bluetooth.
2. On the CarPlay module screen, navigate to "Discover and connect devices".
3. Select the Bluetooth device name (e.g., "CX_BT.....") and pair your iPhone.

7.2. Wireless Android Auto Connection

1. On your Android phone, open Wi-Fi and Bluetooth.
2. On the CarPlay module screen, navigate to "Discover and connect devices".
3. Select the Bluetooth device name (e.g., "CX-BTXXXX") and pair your Android phone.

7.3. Using Steering Wheel Buttons

• Short press: Answer or hang up phone calls.
• Long press: Activate language control (without original car Bluetooth).
• Volume buttons: Increase or decrease volume.
• Long press system reset.

7.4. Using Central Control Knob

• Long press: Switch systems.
• Rotate knob: Move the cursor.
• Short press: Confirm selection.
• Flip left/right: Switch between previous and next songs.
• Long press: Confirm activation of language control.
• Right dial for 15 seconds: Reset.

7.5. Voice Control

Utilize the voice assistant (e.g., Siri) to control navigation, make phone calls, play music, and execute other commands hands-free.

7.6. GPS Navigation

The system includes built-in global positioning, offering omni-directional map display, real-time traffic conditions, and accurate positioning. Supports various navigation apps like iGO, Sygic, Waze, and Google Maps.

7.7. HDMI IN and Mirror Link

The device supports HDMI IN for synchronously playing pictures/videos from external sources. Mirror Link functionality allows you to display your phone's screen on the car's display, enabling use of navigation apps or video playback from your phone.

7.8. AHD Reversing Video

The system supports AHD rear-view video, providing clearer picture quality compared to ordinary cameras for enhanced safety during reversing.

7.9. Dual System Switch

The device is compatible with the original car system, allowing for free and seamless switching between the original interface and the CarPlay/Android Auto interface.

8. Car Settings

Access the "Car Setting" menu to configure various options:

• Reverse Camera: Enable/disable and configure settings for the reverse camera.
• Camera Format: Adjust the format for connected cameras.
• Radar Switch: Control radar display.
• Tracking Line Switch: Enable/disable dynamic parking lines.
• Reverse Activation: Configure how reverse camera activates.
• Front View Time Setting: Set the display duration for the front camera.
• Voice Button Switch: Enable/disable voice control button.
• Audio Settings: Adjust volume, MIC sensitivity, EQ, and original MIC settings.
• Original Multimedia Selection AUX: If multimedia is selected in the factory radio menu and AUX front row is selected in the external device, sound will output from BMW NBT speakers.
• Cell phone Bt connection: To use the original car Bluetooth audio, select Bt audio playback.

9. Specifications

9.1. General Specifications

• Operating Voltage: 9-16V
• Operating Temperature: -30°C to +75°C
• Stored Temperature: -30°C to +85°C
• Environment Humidity: ≤98% (at 45°C), 65±5% (rated)
• Power Consumption: 500mA (rated), 3A (Max)
• Shutdown Current: 3mA (Clock is on)
• Quiescent Current: Less than 3mA
• Charging Current: ≤2A. When USB charging current > 1A, the host activates circuit protection to control current below 1.5A to prevent product damage.

10. Troubleshooting

• Screen not showing normally: Check the LVDS cable connection and DIP Switch settings.
• Sound problems: Verify that the Multimedia and install system settings of the original car are correct.
• Install mainframe's pilot lamp not working: Check the power cable connection and the fuse.
• Original car information not showing: Check if the MOST cable was moved to the right place.
• Reverse camera added, original camera turned off: This is the expected behavior when an aftermarket reverse camera is integrated.

11. User Tips

• For optimal audio quality, ensure your phone's Bluetooth is connected to the original car's Bluetooth audio and the car's sound channel is set to AUX before switching to the CarPlay interface.
• If you intend to use third-party video apps like YouTube or Netflix, ensure you purchase the LA10+TV BOX version.

12. Warranty and Support

This product comes with a 3-year free replacement warranty. For detailed terms and conditions, please refer to the official documentation.

A comprehensive user manual in PDF format is available for download. You can view it here: User Manual (PDF)