VTOMAN FlashSpeed 2400

Contents

VTOMAN FlashSpeed 2400 Portable Power Station User Manual

Model No.: PB-112

1. Specifications

General Info

Product NameFlashSpeed 2400 Power Station
Net Weight19KG (41.89lbs)
Dimensions393*280*270mm (15.5x11x10.6 inch)
CertificationFCC, RoHS, UN38.3, CE

Battery Info

Capacity1408Wh
Battery TypeLiFePO4
Cycle Life3000 cycles to 80%

Output Ports

AC Output2400W in total, 120V~60Hz Pure Sine Wave
USB-A Output5V=2.4A, 12W Max per port
USB-A Output (Fast Charge)5V=3A, 9V=2A, 12V=1.5A, 18W Max
USB-C Output5V=3A, 9V=3A, 12V=3A, 15V=3A, 20V=3A, 20V=5A, 100W Max per port
DC Output1xCar Charger (12V/10A) + 2xDC5521 (12V/10A)

Input Ports

AC Input1500W Max
DC Input12-20V, 200W Max
Solar Input12-60V, 600W Max

Environment Operating Temperature

Operating Temperature-20°C~55°C (-4°F to 131°F)
Charging Temperature0°C~55°C (32°F to 131°F)

2. Package List

Please kindly check all accessories are complete. If any parts are missing, please feel free to contact us at service.us@vtoman.com.

FlashSpeed 2400 Power Station
FlashSpeed 2400 Power Station
AC Charging Cable
AC Charging Cable
Car Charger Cable
Car Charger Cable
USB-C to USB-C Cable
USB-C to USB-C Cable
USB-A to USB-C Cable
USB-A to USB-C Cable
Quick Reference Guide
Quick Reference Guide
No.ItemQty.Specification
1FlashSpeed 2400 Power Station1120V/2400W
2AC Charging Cable1/
3USB-C to USB-C Cable1/
4USB-A to USB-C Cable1/
5Car Charger Cable1/
6Quick Reference Guide1English version

3. Safety Instructions

3.1 Usage

  • Read all the instructions before using the product.
  • To reduce the risk of injury, close supervision is necessary when the product is used near children.
  • Do not put fingers or hands into the product.
  • Use of an attachment not recommended or sold by power pack manufacturer may result in a risk of fire, electric shock, or injury to persons.
  • To reduce risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting the power pack.
  • Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
  • Do not operate the power pack with a damaged cord or plug, or a damaged output cable.
  • Do not disassemble the power pack, take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or electric shock.
  • To reduce the risk of electric shock, unplug the power pack from the outlet before attempting any instructed servicing.

3.2 Personal Precautions

  • Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing, or eyes.
  • Wear complete eye protection and clothing protection. Avoid touching eyes while working near battery.
  • If battery acid contacts skin or clothing, wash immediately with soap and water. If acid enters eye, immediately flood eye with running cold water for at least 10 minutes and get medical attention immediately.
  • NEVER smoke or allow a spark or flame in vicinity of battery or engine.
  • Be extra cautious to reduce risk of dropping a metal tool onto battery. It might spark or short-circuit battery or other electrical part that may cause explosion.
  • When charging the internal battery, work in a well ventilated area and do not restrict ventilation in any way.
  • Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
  • Do not expose a power pack to fire or excessive temperature. Exposure to fire or temperature above 265°F (130°C) may cause explosion.
  • Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.

3.3 Disposal Guide

  • If conditions permit, make sure that the battery is fully discharged before disposing it in a designated battery recycling bin. The product contains batteries with potentially dangerous chemicals, so it is strictly prohibited to dispose of it in ordinary trash cans. For more details, please follow the local laws and regulations on battery recycling and disposal.
  • If the battery cannot be fully discharged due to a product failure, please do not dispose of the battery directly in the battery recycling box. In such case, you should contact a professional battery recycling company for further processing.
  • Please dispose of over-discharged batteries that cannot be recharged.

4. Product Features

4.1 Product Details

Complete Port Panel Diagram
Complete Port Panel: This diagram illustrates the various input and output ports on the FlashSpeed 2400. Key features include USB-C Output (100W Max per port), AC Input (1500W Max), DC Input (200W Max), Solar Input (600W Max), DC Output (12V/10A), LCD Display, Car Jump Start, Extra Battery Port, and AC Output (120V/2400W). USB-A outputs are also detailed with 12W Max and 18W Max for Quick Charge.

4.2 LCD Screen Introduction

LCD Screen Display
LCD Screen Display: Shows Remaining Battery Percentage, Remaining Charge/Discharge Time, Input/Output Power, Capacity, Hours, Watts, and indicators for ODC, USB-C, USB-A, and AC outputs.

5. Operating Instructions

5.1 Power & Function On/Off

  • Power On: Short press any button to power on the product and enter the standby state. The LCD Screen will light up and the battery level indicator icon will display.
  • Power Off: Turn off all outputs manually, then the product enters the standby state and will shut down after 30 minutes.
  • AC Output On/Off: Short press the AC Button to use the AC output; Short press the AC Button again to turn it off.
  • DC Output On/Off: Short press the DC Button to use the 12V DC output; Short press the DC Button again to turn it off.
  • USB-A & USB-C On/Off: Short press the USB Button to use the USB-A & USB-C output; Short press the USB Button again to turn it off.

V-Beyond Technology: It allows you to run devices over 2400 watts but no more than 3200 watts on FlashSpeed 2400 power station. It would lower the output voltage to bring the power back down without tripping the overload protection, so that you can continue to run those devices. It's suitable for resistive loads such as lights, space heaters, toasters, ovens, and coffee makers, etc. But please note that it's NOT suitable for complex electronics such as computers, TVs, refrigerators, etc.

5.2 Recharge Methods & Recharge Time

MethodRecharge Time
Wall Outlet1 Hour
Car Outlet12-14 Hours
400W Solar Panels4-8 Hours

Warm Tips: Before use, please plug your FlashSpeed 2400 power station into the wall until it is fully charged.

2. Recharge by AC Outlet

You can use the AC charging cable through the AC Input Port to recharge the FlashSpeed 2400 power station. The recharging time is about 1 hour.

AC Charging Method
AC Charging Method: Connect the power station to a wall outlet using the AC charging cable.

3. Recharge by Car Outlet

You can recharge the FlashSpeed 2400 through the DC Input Port with a car charging cable. The recharging time is about 12-14 hours.

Car Charging Method
Car Charging Method: Connect the power station to a car cigarette lighter using the car charger cable.

4. Recharge by Solar Panel

You can connect a Vtoman VS400 400W Solar Panel to recharge FlashSpeed 2400 power station. The recharge time is about 4-8 hours (depending on sunlight intensity).

Solar Charging Method
Solar Charging Method: Connect the power station to a solar panel (12-60V, 600W Max) via an Anderson connector.

If connecting with your own solar panel, please make sure the working voltage of the solar panel is between 12-60V to recharge properly.

5.3 Use of LED Flashlight

The FlashSpeed 2400 Power Station features a LED flashlight with 5 modes. Please follow the instructions below to enter different modes:

  • Weak Light Mode: Short press the LED button on the power station to turn on the light, it enters the weak light mode;
  • Medium Light Mode: Press the LED button twice to enter medium light mode;
  • Strong Light Mode: Press the LED button three times to enter strong light mode;
  • Strobe Mode: Press the LED button four times to enter strobe mode;
  • SOS Mode: Press the LED button five times to enter SOS mode. Press the LED button again to turn the light off.

5.4 Uninterrupted Power Supply (UPS)

To use the UPS function, connect the Power Station to a wall outlet with the AC charging cable, then press the AC button and connect your devices via the AC output ports. The FlashSpeed 2400 provides <10ms UPS backup power.

UPS Function Diagram
UPS Function: Connect the power station to a wall outlet and your device to the power station for uninterrupted power.

6. Storage & Maintenance

  • Before storing, please turn off the product first, and then store it in a dry, ventilated place at room temperature, away from water, heat, and other metal objects.
  • For long-term storage, please discharge the battery to about 60%-80% before storing, and recharge it every 2 to 3 months to extend its battery life.
  • When using the battery every day, it is recommended to charge the battery to about 90% when charging, and leave about 10% when discharging.
  • Please use or store the product in an environment temperature between 68°F to 86°F. For safety, please do not store the product in an environment temperature higher than 113°F or lower than 14°F for a long time.
  • To clean the product, please gently wipe it with a dry, soft, clean cloth or paper towel.

7. Troubleshooting

ProblemCauseSolution
Product has no output power.Your device is not connected to the power station well.Check the connection between the power station and your device. Make sure it's well connected.
Output switch is not turned on.Turn on the AC/DC/USB output switch manually. And the corresponding output method will be displayed on the display.
Battery is low.Recharge the power station fully before use.
Product doesn't get a charge by AC Input.The charger is not well connected to the power station or wall outlet.Check the connection between the power station and the AC outlet.
Connection is well, but the display doesn't show charging watts.Please contact with Vtoman customer service at service.us@vtoman.com.
Product doesn't get a charge by Solar Input.Solar panels are not placed under the sunlight.Please place the solar panel under direct sunlight to get the best solar charging effect.
The solar panel is not compatible with the power station.Please make sure the working voltage of your solar panel is between 12V to 60V, or it won't charge the power station.

8. Frequently Asked Questions (FAQs)

  • What devices can the FlashSpeed 2400 power?
    With 2400W rated power and 3200W peak power, FlashSpeed 2400 can normally power devices with rated power no more than 2400W. Besides, with Vtoman's V-Beyond Technology, FlashSpeed 2400 can run resistive loads over 2400 watts but no more than 3200 watts such as lights, space heaters, toasters, ovens, and coffee makers, etc. But please note that it's NOT suitable for complex electronics such as computers, TVs, refrigerators, etc.
  • How to know the working time for my device?
    Working time = 1408Wh * 0.85 / operating power of your device.
  • Can the FlashSpeed 2400 be charged while using?
    Yes, FlashSpeed 2400 supports pass-through charging. You can recharge the power station while charging your device.
  • Can the FlashSpeed 2400 be used as a UPS?
    Yes, the FlashSpeed 2400 has the UPS (Uninterrupted Power Supply) function.
  • Are the DC output ports regulated 12V?
    Yes, the voltage of DC5521 output ports and the car cigarette port are regulated 12V.
  • What kind of solar panel does FlashSpeed 2400 support?
    To charge FlashSpeed 2400 through the Anderson solar input port, the solar panels need to meet the following requirements: 1) The working voltage of solar panel is between 12-60V; 2) The solar panel has an Anderson adapter (or converted into Anderson connector). For example, some solar panels come with MC4 interface, then you just need to use an MC4 to Anderson adapter cable to convert.
  • Does FlashSpeed 2400 have MPPT feature?
    Yes, all Vtoman power stations are built-in MPPT feature. You don't need to get an extra MPPT controller to connect the FlashSpeed 2400 power station with your solar panel.

9. User Tips

  • For optimal solar charging, ensure your solar panel is placed under direct sunlight.
  • To estimate device run time, use the formula: 1408Wh * 0.85 / device operating power.
  • The power station supports pass-through charging, allowing you to charge it while simultaneously powering your devices.
  • For faster charging, consider using both AC and solar charging methods simultaneously.

10. Warranty & Support

Warranty Period

The warranty period of the VTOMAN portable power station is 24 months. Consumers need to provide a sales receipt for the first purchase or other reasonable documentary proof to determine the start date of the warranty period. Under normal circumstances, the warranty period is calculated from the date of purchase by the original consumer.

Exchange

If VTOMAN products cannot be operated due to defects in workmanship or materials during the applicable warranty period, Vtoman will provide free replacement, and VTOMAN will bear the freight. In addition, the replacement product will bear the remaining warranty period of the original product.

Exclusions

VTOMAN's warranty does not apply to:

  • Misuse, abuse, modification, accidental damage, or use for any other purpose other than those authorized in the current product information of VTOMAN;
  • Attempt to repair by anyone outside the authorized organization;
  • Appearance damage due to using;
  • Non-original consumer purchasers;
  • The VTOMAN warranty does not apply to battery cells.

Contact Us

If you have any questions during using Vtoman products, please feel free to contact us at service.us@vtoman.com.

11. Product Overview Video

This video showcases the VTOMAN FlashSpeed 2400 Portable Power Station in various use cases, highlighting its features like simultaneous multi-device power, expandability, solar input, vehicle jump starter function, ultra-fast EV charging, pass-through charging, and LED lighting function.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.