Circooter S1 Plus

Contents

Circooter S1 Plus Electric Scooter User Manual

Model: S1 Plus | Brand: Circooter

1. Introduction

Thank you for choosing the Circooter S1 Plus Electric Scooter. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new electric scooter. Please read this manual thoroughly before your first ride to ensure optimal performance and safety.

Circooter S1 Plus Electric Scooter front view
Front view of the Circooter S1 Plus Electric Scooter.
Circooter S1 Plus Electric Scooter side view
Side view of the Circooter S1 Plus Electric Scooter, highlighting its design.

2. Safety Warnings

Riding an electric scooter carries inherent risks. To minimize these risks, always follow these safety guidelines:

  • Always wear a helmet and appropriate protective gear (knee pads, elbow pads) when riding.
  • Do not ride under the influence of alcohol or drugs.
  • Obey all local traffic laws and regulations.
  • Maintain a safe distance from other vehicles and pedestrians.
  • Avoid riding in heavy traffic, on slippery surfaces, or in adverse weather conditions (rain, snow, strong winds).
  • Ensure the scooter is fully charged and all components are securely fastened before each ride.
  • Do not perform stunts or sudden maneuvers.
  • The scooter is designed for one rider only. Do not carry passengers.
  • Regularly check brakes, tires, and lights for proper function.

3. Assembly and Initial Setup

Your Circooter S1 Plus comes partially assembled. Follow these steps for initial setup:

  1. Unfolding the Scooter: Carefully lift the handlebar stem until it locks into place. Ensure the folding mechanism is securely engaged. The scooter features a one-key folding device for convenience.
    Man folding Circooter S1 Plus electric scooter
    The one-key folding mechanism allows for easy storage and transport.
  2. Handlebar Attachment: Attach the handlebars to the stem, ensuring all cables are properly routed and not pinched. Tighten any screws firmly.
  3. Initial Charge: Before your first ride, fully charge the scooter's battery. Refer to the 'Battery and Charging' section for detailed instructions.
  4. Pre-Ride Check: Verify that the tires are properly inflated, brakes are functional, and all lights are working. Ensure all bolts and fasteners are tight.

4. Operating Instructions

4.1 OLED Smart Display

The scooter is equipped with an OLED smart driving screen that displays real-time information such as speed, range, and gear position, making the riding status clear at a glance.

OLED Smart Display on Circooter S1 Plus handlebar
The OLED Smart Display provides essential riding information.
Close-up of Circooter S1 Plus handlebar display
Detailed view of the handlebar controls and display.

4.2 Circooter App Connectivity

Enhance your riding experience by connecting to the Circooter App. The app allows you to:

  • Lock/Unlock your scooter.
  • Customize riding modes.
  • Perform mode conversion.
  • Activate cruise control.
Circooter App interface and scooter display
Control and customize your scooter settings via the Circooter App.

4.3 Riding Modes

The scooter offers multiple riding modes to suit different preferences and conditions:

  • SPORTS Mode: Up to 45 KM/H for maximum performance.
  • RACE Mode: Up to 35 KM/H for a balanced speed.
  • ECO Mode: Up to 25 KM/H for energy efficiency and extended range.
  • TRIP Mode: Up to 15 KM/H for leisurely rides or crowded areas.
Circooter S1 Plus with 1200W motor and speed modes
Illustration of the 1200W brushless motor and available speed modes.

4.4 Braking System

The S1 Plus is equipped with dual disc brakes on both the front and rear wheels, complemented by an EABS electronic anti-lock braking system. This system significantly reduces wet braking distance by 20%, ensuring smooth and reliable stopping in emergencies.

Close-up of dual disc brakes and EABS system
Detail of the dual disc brakes and EABS electronic anti-lock braking system.

4.5 Lighting System

For enhanced visibility and safety, the scooter features a bright lighting system including:

  • Headlight for illuminating the path ahead.
  • Taillight for visibility from the rear.
  • Turn Signals for indicating direction changes.
Bright lighting system with turn signals, headlight, and taillight
The scooter's bright lighting system ensures visibility.
Rear light and suspension detail
Close-up of the rear light and suspension system.

5. Battery and Charging

The Circooter S1 Plus is powered by a high-capacity, high-performance 48V 15Ah ternary lithium battery. This battery is designed for daily commutes, requiring only about two charges per week for typical use, and retains over 80% of its capacity after 800 charge cycles.

Transparent view of Circooter S1 Plus showing 48V 15Ah battery
The scooter's internal structure highlighting the 48V 15Ah large capacity battery.

5.1 Charging Procedure

  • Ensure the scooter is turned off before charging.
  • Connect the charger to the charging port on the scooter.
  • Plug the charger into a standard power outlet.
  • The charging indicator on the charger will typically show red while charging and turn green when fully charged.
  • Charging time is approximately 6-8 hours for a full charge.
  • Do not overcharge the battery. Disconnect the charger once charging is complete.

5.2 Battery Care

  • Store the scooter in a cool, dry place when not in use.
  • Avoid exposing the battery to extreme temperatures.
  • If storing for an extended period, charge the battery to about 50-70% and recharge every 1-2 months to prevent deep discharge.

6. Maintenance

Regular maintenance ensures the longevity and safe operation of your scooter.

6.1 General Cleaning

  • Wipe the scooter with a damp cloth after each ride.
  • Do not use high-pressure water jets or corrosive cleaners.
  • Ensure the charging port cover is securely closed to prevent water ingress.

6.2 Tire Care

The scooter features 10-inch low rolling resistance tubeless all-terrain tires with a unidirectional tread pattern for quick water drainage.

Close-up of 10-inch all-terrain tires
The 10-inch all-terrain tires are designed for various road conditions.
  • Regularly check tire pressure and inflate to the recommended PSI (check tire sidewall for details).
  • Inspect tires for wear, punctures, or damage before each ride.

6.3 Brake System

  • Check brake levers and cables for proper tension and responsiveness.
  • Inspect brake pads for wear and replace them if necessary.

6.4 Suspension System

The scooter is equipped with front and rear rocker arm shock absorbers for a smoother ride, effectively filtering out road bumps.

Transparent view showing front and rear rocker arm shock absorbers
The front and rear rocker arm shock absorbers provide enhanced riding stability.
  • Periodically check the suspension components for any signs of damage or excessive play.

7. Troubleshooting

Problem Possible Cause Solution
Scooter does not turn on Low battery; Power button not pressed correctly; Loose connections. Charge the battery; Press and hold the power button; Check all visible connections.
Reduced range or power Low battery charge; Overloaded scooter; Riding uphill frequently; Cold weather. Fully charge the battery; Ensure rider weight is within limits; Adjust riding style; Battery performance may be reduced in cold temperatures.
Brakes feel weak Worn brake pads; Loose brake cable; Air in hydraulic system (if applicable). Inspect and replace brake pads; Adjust brake cable tension; Consult a professional for hydraulic brake issues.
App connectivity issues Bluetooth off; App not updated; Scooter not discoverable. Ensure Bluetooth is enabled on your device; Update the Circooter App; Restart the scooter and try pairing again.

8. Specifications

Feature Specification
Brand Name SwiftWind (Circooter)
Model S1 Plus
Category Two-wheel Scooter
Applicable People Unisex
Max Speed Up to 25 KM/H (ECO Mode, as per general specification); Up to 45 KM/H (SPORTS Mode)
Range By Charge Approx. 55 KM (Advertised); 20-40 KM (Typical usage range)
Motor Power (W) 201-250W (Rated); 1200W (Peak High-Efficiency Brushless Motor)
Battery 48V 15Ah Ternary Lithium Battery
Voltage 48V
Charging Time 6-8 hours
Tire Size 10 inch All-Terrain Tubeless Tires
Brakes Dual Disc Brakes (Front & Rear) with EABS Anti-lock System
Suspension Front and Rear Rocker Arm Shock Absorbers
Folded Yes (One-key folding)
Is Saddle Removable Yes
Certification CE
Origin Mainland China
Package Weight 29.4 kg
Package Dimensions 118cm (L) x 19cm (W) x 58cm (H)

9. User Tips

  • For optimal battery life, avoid completely draining the battery before recharging.
  • Utilize the different riding modes (ECO, RACE, SPORTS, TRIP) to match your environment and conserve battery when possible.
  • Regularly check tire pressure, especially before longer rides, to ensure efficiency and safety.
  • Familiarize yourself with the Circooter App features to customize your riding experience and utilize functions like cruise control.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your proof of purchase for any warranty claims.

The manufacturer is committed to providing quality products and support. Please refer to the official product page or contact customer service for the most up-to-date warranty terms and conditions.

© 2024 Circooter. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.