OnRetul CNB-707

Contents

CNB-707 12V Automotive Relay Tester

User Manual

1. Introduction

The CNB-707 12V Automotive Relay Tester is a diagnostic tool designed for quick and accurate testing of 4-pin and 5-pin automotive relays. This device helps identify faulty relays before replacement, ensuring efficient troubleshooting for cars, trucks, and other vehicles. It features a compact design, one-button automatic testing, and clear LED feedback for ease of use by both DIY enthusiasts and professional mechanics.

CNB-707 12V Automotive Relay Tester highlighting key features
Figure 1: CNB-707 Relay Tester with features including 4/5-pin compatibility, 12V powered, accurate test results, wide relay support, plug & play operation, and durable & reliable construction.

2. Safety Information

Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Always wear appropriate personal protective equipment, such as safety glasses, when working on automotive electrical systems.
  • Ensure the vehicle's ignition is off and the parking brake is engaged before connecting or disconnecting the tester.
  • Connect the tester to a 12V DC battery only. Do not connect to higher voltage systems.
  • Ensure proper polarity when connecting the battery clips: Red clip to positive (+), Black clip to negative (-). Incorrect connection can damage the tester or vehicle's electrical system.
  • Do not use the tester if it appears damaged or if the cables are frayed.
  • Keep hands and loose clothing away from moving engine parts.
  • Do not expose the tester to moisture or extreme temperatures.

3. Package Contents

Verify that all items are present in your package:

  • 1 x CNB-707 Automotive Relay Tester Unit
  • Integrated Battery Clips (Red for Positive, Black for Negative)

4. Product Overview

Familiarize yourself with the components and layout of the CNB-707 Relay Tester.

Diagram of CNB-707 Relay Tester with labeled parts and dimensions
Figure 2: Labeled components of the CNB-707 Relay Tester, including the Relay Connector, LED Indicator, 4PIN/5PIN Switch, TEST button, and Insulated Battery Clips. Dimensions are also shown.

Key Components:

  • Relay Connector: Socket for inserting the relay to be tested.
  • LED Indicator: Provides visual feedback on the relay's status (Green for Normal, Red for Abnormal).
  • 4PIN / 5PIN Switch: Selects the appropriate testing mode for 4-pin or 5-pin relays.
  • TEST Button: Initiates the automatic relay test sequence.
  • Insulated Battery Clips: Connects the tester to a 12V vehicle battery for power.

5. Specifications

Feature Specification
Model CNB-707
Power Source 12V DC Vehicle Battery
Relay Compatibility 4-pin and 5-pin automotive relays
Item Weight 230g
Item Dimensions (L x W x H) Approx. 15 cm x 9 cm x 7 cm (5.9 in x 3.5 in x 2.8 in)
Tester Thickness 4.06 cm (1.60 in)
Cable Length 34.65 inches
Battery Included No (uses vehicle battery for power)

6. Setup

Follow these steps to prepare the relay tester for operation:

  1. Connect to 12V Battery: Ensure the vehicle's ignition is off. Attach the black battery clip to the negative (-) terminal of the 12V vehicle battery. Attach the red battery clip to the positive (+) terminal of the 12V vehicle battery. Ensure a secure connection.
  2. Select Relay Type: Identify whether the relay you intend to test is a 4-pin or 5-pin type. Use the 4PIN / 5PIN Switch on the tester to select the corresponding mode.
  3. Insert Relay: Carefully insert the automotive relay into the Relay Connector socket on the tester. Ensure it is seated firmly and correctly according to its pin configuration.
CNB-707 Relay Tester connected to a 12V car battery
Figure 3: Proper connection of the relay tester to a 12V car battery using insulated alligator clips.
Examples of 4-pin and 5-pin automotive relays
Figure 4: Visual representation of 4-pin and 5-pin relays, demonstrating the tester's compatibility.

7. Operating Instructions

Once the setup is complete, proceed with testing the relay:

  1. Initiate Test: Press the TEST Button on the relay tester. The tester will automatically identify the relay pin position and begin the test sequence.
  2. Observe LED Indicator: The LED Indicator will illuminate to show the relay's status:
    • Green LED: Indicates the relay is functioning normally.
    • Red LED: Indicates the relay is abnormal or faulty.
  3. Complete Test: The test is typically quick, providing results in seconds.
  4. Remove Relay: After the test, carefully remove the relay from the tester.
  5. Disconnect Power: Disconnect the battery clips from the vehicle battery, starting with the negative (-) terminal.
Three easy steps to test a relay and LED indicator meanings
Figure 5: A visual guide to the 3-step testing process and the meaning of the LED indicator colors.
Close-up of the relay tester showing one-button automatic testing and green LED indicator
Figure 6: The tester in operation, demonstrating the one-button automatic testing feature and the illuminated green LED for a normal relay.

8. Maintenance

To ensure the longevity and proper functioning of your relay tester, follow these maintenance guidelines:

  • Cleaning: Wipe the tester with a soft, dry cloth after each use. Do not use abrasive cleaners or solvents.
  • Storage: Store the tester in a clean, dry place away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective case to prevent damage.
  • Cable Inspection: Periodically inspect the battery cables and clips for any signs of wear, cuts, or damage. Replace if necessary.

9. Troubleshooting

If you encounter issues while using the relay tester, refer to the following common problems and solutions:

Problem Possible Cause Solution
Tester does not power on / No LED light
  • Incorrect battery connection.
  • Low vehicle battery voltage.
  • Damaged battery clips or cable.
  • Ensure red clip is on positive (+) and black clip on negative (-).
  • Check vehicle battery voltage (should be around 12V).
  • Inspect cables for damage.
LED shows Red (Abnormal) for a known good relay
  • Incorrect 4PIN/5PIN switch setting.
  • Relay not fully seated in the connector.
  • Verify the switch matches the relay type.
  • Re-insert the relay firmly into the connector.
Tester provides inconsistent results
  • Poor connection to vehicle battery.
  • Dirty relay pins.
  • Ensure battery clips have good contact.
  • Clean relay pins before inserting.

10. User Tips

  • Always double-check the relay type (4-pin or 5-pin) and ensure the switch on the tester is set correctly before initiating a test.
  • For best results, ensure the relay pins are clean and free of corrosion before inserting them into the tester.
  • If testing multiple relays, perform tests one at a time and note the results to avoid confusion.

11. Warranty & Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.