PRELINGCAR LCD Digital Dashboard Cluster

Contents

Prelingcar 12.3 inch LCD Digital Dashboard Cluster User Manual

Model: LCD Digital Dashboard Cluster | Brand: PRELINGCAR

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Prelingcar 12.3 inch LCD Digital Dashboard Cluster. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Video 1: Product Overview and Disassembly. This video provides a visual overview of the digital dashboard cluster and its internal components.

Front view of the 12.3-inch digital dashboard for Skoda Octavia 2014-2018.

Figure 1: Front view of the Prelingcar 12.3-inch LCD Digital Dashboard Cluster.

2. Safety Information

⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Always ensure the vehicle is turned off and the battery is disconnected before performing any installation or maintenance to prevent electrical shock or damage to the vehicle's electrical system.

3. Specifications

FeatureSpecification
Brand NamePRELINGCAR
Applicable ModelsVolkswagen Skoda Octavia 2014-2018 Years
Screen Size12.3 inch HD IPS
Resolution1920x720
Operating SystemLinux
CPUT5 1.5Ghz
MaterialABS
Placement on VehicleDashboard
Factory Voltage9V-16V
Operating Current0.8A-1.5A
Standby CurrentLess than 3MA
Item Weight3.5 kg
Package Dimensions (L x W x H)40 cm x 30 cm x 20 cm

4. Setup and Installation

The Prelingcar Digital Dashboard Cluster is designed for plug-and-play installation without the need for coding or cutting wires. It utilizes the original car's mainboard to retain all original vehicle information.

4.1 Pre-Installation Steps

  1. Set Speed Limit and Turn Off Winter Tires: Before installing the digital cluster, access your vehicle's settings to set the speed limit alarm to 250 km/h and turn off the winter tire setting.
Car dashboard showing winter tire settings and speed limit of 250 km/h.

Figure 2: Adjusting winter tire settings and speed limit in the original dashboard.

  1. Retain Original Buzzer: If your original car's motherboard has a buzzer, it is crucial to keep it. Failure to do so may result in alarm sounds not working or other functions being impaired.
Circuit board with a red circle highlighting the buzzer component.

Figure 3: Location of the buzzer on the original car motherboard.

  1. Retain Small Motherboard: If your original cluster includes a small motherboard, as shown in the figure, you must keep it and install it within the new digital cluster.
Small circuit board labeled 'Keep small motherboard'.

Figure 4: Small motherboard to be retained from the original cluster.

4.2 HDMI Connection

The digital cluster supports HDMI input for synchronized display from an Android player. This requires an Android head unit, an HDMI cable, and an HDMI exchange box.

  1. Connect the HDMI output from the digital cluster to an HDMI cable.
  2. Connect the other end of the HDMI cable to an HDMI exchange box.
  3. Connect the HDMI exchange box to a USB port on your Android player.
  4. After successful connection, turn on the digital cluster, navigate to the navigation interface, and press the down button to activate the HDMI display.
Diagram illustrating the HDMI connection setup for the digital cluster, HDMI cable, HDMI exchange box, and Android player.

Figure 5: HDMI connection diagram.

4.3 Installation Comparison

Before and after installation comparison showing the integration of the digital dashboard with the original car interior.

Figure 6: Before and after installation comparison.

Illustrations showing non-destructive installation methods: unbroken line, solderless, and no-drill.

Figure 7: Non-destructive installation features.

5. Operating Instructions

5.1 Initial Setup

  1. Fuel Tank Set: If the fuel tank level displayed is inaccurate, first fill the tank completely. Note the full tank value, then enter it in the settings.
Dashboard screen showing 'Refuel Quantity' input and 'Fuel Tank' calibration settings.

Figure 8: Fuel Tank settings.

  1. Car Type Set: Go to the settings menu, select 'Car Type', and choose your specific car model. After selection, turn off the engine, power, lock the car, and wait for 5 minutes before restarting for the changes to take effect.
Dashboard screen showing 'Setting' menu with 'CarType' selected, displaying 'MQB Golf'.

Figure 9: Car Type settings.

  1. Speed Calibration: In the dashboard settings, under 'calibration settings' (second item), enter the difference between the displayed speed and the actual speed to calibrate the average speed value.
  2. Consumption Set: In the dashboard settings, under 'calibration settings' (third item), change the mode to manual. Then, enter the difference between the actual consumption displayed and the actual consumption to calibrate the average consumption value.
  3. Unit Set (PQ Platform): Configure units for Distance, Vehicle Speed, Volume, Consumption, Temperature, Pressure, and Time.

5.2 Preferences and Display

  1. Preference Set: Access the 'Preference' menu to configure various settings including oil pressure detection, physical light, mirror back behavior, transmission type, race mode, boot sound, tire pressure, MIL check, phone mirror, rear door follow, brake pad inspection, voltage display frequency, reverse left/right, width indicator light, movement controls, zoom ratio, and time source.
Dashboard screen showing the 'Preference' menu with various settings options.

Figure 10: Preference settings menu.

  1. Dashboard Type Set: In the dashboard type settings, you can configure the sport speed and RPM (6000 RPM for diesel or 8000 RPM for gas).
Dashboard screen showing 'Ambient Light', 'Maintenance', 'Dashboard type' settings and 'Dial style', 'Speed: Sport', 'RMP: gas' options.

Figure 11: Dashboard Type settings.

  1. Language Set: Access the 'Language' settings to choose from 20 available languages.
Dashboard screen showing 'Language' setting with 'English' selected.

Figure 12: Language settings.

Dashboard screen displaying various language options for translation.

Figure 13: Multi-language support interface.

  1. LHD/RHD Configuration: If your vehicle is Right-Hand Drive (RHD), go to the configuration settings and adjust it to LHD or RHD as appropriate.
Dashboard screen showing 'Pointer style', 'Car color', 'LHD/RHD Configuration', 'Language', and 'Bt conn' settings.

Figure 14: LHD/RHD configuration settings.

  1. Trip Set: Access the travel data, press OK, select 'Reset trip', and confirm with OK to reset trip data.
Dashboard screen showing 'Driven distance', 'Average speed', 'Trip', 'Refuel Quantity', 'Adblue driving range' and 'Reset trip' button.

Figure 15: Trip settings.

  1. UI Theme Set: To change the UI theme (e.g., from Golf 8 to Golf 7), go to settings, select 'Theme', choose your desired theme (G8 or G7), and press OK.
Dashboard screen displaying various UI themes and dial styles, including New Golf 8 UI and Classic G7 UI.

Figure 16: UI Theme selection.

  1. Radio Display Zone Set: In the 'Preference' menu, select 'Zoom radio' to adjust the radio display zone from 1.0 to 0.** as desired.

5.3 CarPlay / Android Auto Functionality

The digital cluster supports wireless CarPlay and Android Auto, allowing you to mirror maps, music, and videos from your phone.

  1. Connecting CarPlay: Go to the 'CarPlay' option. Once connected, press down to access a menu where you can adjust the region or switch devices.
  2. Adjust Region/Switch Device: 'Adjust region' defines the interface display zone. 'Switch device' allows you to toggle between CarPlay, AirPlay, Android Auto, and HiCar. If you have an Android phone, select Android Auto to connect via Bluetooth.
Dashboard screen showing CarPlay function with a smartphone displaying the CarPlay interface.

Figure 17: CarPlay functionality display.

5.4 Synchronized Display

The cluster can synchronize display with rear cameras, 360-degree cameras, DVRs, and CarPlay/Android Auto.

Dashboard screen showing synchronized display capabilities for rear camera, 360-degree camera, DVR, and CarPlay/Android Auto.

Figure 18: Synchronized display features.

5.5 Ambient Lighting

The digital cluster offers 30 colors of ambient lighting, which can be changed for a more immersive experience. It synchronizes with existing ambient lighting colors.

Dashboard screen displaying a color spectrum for 30 ambient lighting options.

Figure 19: Ambient lighting color selection.

6. Maintenance

To maintain the clarity and functionality of your digital dashboard, regularly wipe the screen with a soft, lint-free cloth. Avoid using harsh chemicals or abrasive materials that could damage the display. Ensure all connections remain secure.

7. Troubleshooting

If you encounter any issues, first check all connections to ensure they are secure. If the display is not functioning, verify the power supply. For specific issues related to original car data display, ensure the original car motherboard and buzzer are correctly installed and connected within the new cluster. If problems persist, refer to the installation video or contact customer support.

8. User Tips

  • Always perform pre-installation steps carefully, especially regarding the original buzzer and small motherboard, to ensure full functionality.
  • When setting up the car type, ensure you follow the power cycle instructions (turn off, lock, wait 5 mins) for changes to apply correctly.
  • For optimal display, ensure your Android head unit is compatible if you plan to use the HDMI sync feature.

9. Warranty and Support

This product comes with a 2-year warranty. We promise to reply to any questions within 24 hours. If the product has a problem within 365 days after receipt confirmation, we offer free return and refund within 15 days, or we will replace the new machine directly for you. Please contact customer service first to communicate any issues. Firmware, software, UI, and GPS navigation map updates are provided for free.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.