Wuzhi Audio ZK-TB22

Contents

ZK-TB22 2.2-Channel Bluetooth Power Amplifier Board

Model: ZK-TB22 | Brand: Wuzhi Audio

1. Introduction

The ZK-TB22 is a versatile 2.2-channel Bluetooth power amplifier board designed for various audio applications, including home desktop speakers, store speakers, and car modifications. It features dual 145W subwoofers, lossless decoding, and independent volume adjustments for a customized audio experience.

Key Features:

  • Supports 2.2-channel power output with dual 145W subwoofers without requiring additional expansion.
  • Lossless decoding supports multiple formats and is compatible with computer mode and multi-channel input.
  • Dual package replaceable fever amplifier with a reserved microphone expansion interface for strong expandability.
  • Independent volume adjustment for left and right channels and double bass, allowing customization of high, low, and mid tones.
  • Suitable for various audio and video scenarios, including home desktop speakers, store speakers, and car modifications.

2. Safety Information and Cautionary Notice

IMPORTANT: Only when the audio input is sufficient and the power supply voltage/current is adequate, will there be sufficient output power! The higher the power supply voltage, the greater the output power, and the smaller the speaker impedance, the greater the output power! Please ensure that the power of the adapted power supply is greater than the actual working power of the amplifier!

Cautionary Notice regarding power supply and output

Image: Cautionary Notice regarding power supply and output power.

3. Product Overview

The ZK-TB22 amplifier board comes in two main configurations: with an integrated potentiometer or an external potentiometer type. Below are diagrams illustrating the key components and interfaces.

Integrated Potentiometer Version:

Integrated Potentiometer Amplifier Board with labeled components

Image: Integrated potentiometer version with labeled components including power input, speaker outputs, USB, AUX-IN, expansion interfaces, and control knobs.

  • Power Input: DC12-24V
  • Speaker Outputs: Subwoofer speaker 1, Subwoofer speaker 2, Left-channel speaker, Right-channel speaker
  • Inputs: USB interface, AUX-IN Input
  • Expansion Interfaces: 12V fan expansion interface, Expansion Interface 1, Expansion Interface 2
  • Controls: Subwoofer frequency adjustment, Subwoofer volume adjustment, High pitch adjustment, Bass adjustment, Left and right channels volume adjustment (with multi-function buttons)

External Potentiometer Version:

External Potentiometer Amplifier Board with labeled components

Image: External potentiometer version, showing the main board and separate potentiometer module connected via cables.

4. Specifications

Parameter Value
Product Name2.2-channel Bluetooth Amplifier Board 75W+75W+145W+145W
Product ModelZK-TB22
Brand NameWuzhi Audio
TypeModule
OriginMainland China
ConditionNew
Quantity1
PackageSOP
is_customizedYes
ApplicationSpeaker
Supply Voltage12-24VDC (Recommended 24V, 10A or above)
Dissipation PowerLow
Operating Temperature-10-65℃
Maximum PowerLeft and right channels ≤ 75W, Subwoofer ≤ 145W
Compatible SpeakerLeft/Right: 20-75W, 4-8 Ω; Subwoofer: 50-150W, 2-8 Ω
Bluetooth DistanceTransmission distance of 15 meters
Input MethodBluetooth + AUX + PC + USB (Bluetooth priority)
Number of Channels2.2 (Left and right channels + dual subwoofer)
Protection MechanismInput undervoltage, overheating, overcurrent, short circuit, input anti-reverse protection
Product Size (Integrated Potentiometer)117x116mm
Product Size (External Potentiometer)117x101mm
Product Specifications Table

Image: Detailed product specifications table.

5. Setup and Installation

Follow these steps to set up your ZK-TB22 amplifier board.

5.1 Power Supply Connection

Connect a DC power supply within the 12-24VDC range. A 24V power supply with a current of 10A or above is recommended for optimal performance. Do NOT use a 24V battery as it can cause overvoltage when fully charged. AC power is not supported. If using a DC/DC boost module, adjust it to 80% of the limit voltage to prevent damage from overvoltage or ripple.

5.2 Speaker Connections

Connect your subwoofer(s) and left/right channel speakers to the designated terminals on the board as shown in the product overview diagram. Ensure correct polarity.

5.3 Input Methods

The amplifier supports Bluetooth, AUX, PC, and USB inputs. Bluetooth takes priority. When using an audio cable (AUX or PC/USB), Bluetooth needs to be disconnected.

5.4 External Antenna Connection (Optional)

For improved Bluetooth range, an external antenna can be connected. The antenna and antenna base must be purchased separately. Refer to the diagram for welding examples.

External Antenna Connection Diagram

Image: Diagram showing antenna base and antenna welding examples.

5.5 Fan Installation (Optional)

If higher heat dissipation is required, a 12V (30mm specification) fan can be installed. Pay attention to distinguish the positive and negative poles during installation.

Fan Installation Diagram

Image: Diagram illustrating the heat dissipation fins and fan installation option.

5.6 ZK-AMP Board Expansion Interface

The board includes expansion ports for connecting to a preamplifier board for reverb input and for reverberation output from a microphone preamplifier board. When using expansion ports 1 and 2, remove the three 0-ohm resistors (R37, R22, and R21).

ZK-AMP Board Expansion Interface Diagram

Image: Diagram showing the ZK-AMP board expansion interfaces and resistor removal.

5.7 Op-Amp Replacement (DIP8 & SOP8 Dual Package Compatible)

The amplifier board supports interchangeable Hi-Fi Op-Amps with DIP8 and SOP8 dual package compatibility. Follow these steps to replace the operational amplifier:

  1. Remove the original SOP8 packaged operational amplifier.
  2. Weld a gold-plated high-reliability DIP8 chip carrier.
  3. Insert the desired audio amplifier.
DIP8 & SOP8 Op-Amp Replacement Steps

Image: Step-by-step guide for replacing the Op-Amp.

6. Operation

6.1 Bluetooth Pairing

To connect your device via Bluetooth:

  1. Ensure the amplifier board is powered on.
  2. On your mobile device, enable Bluetooth and search for available devices.
  3. Select the amplifier board (e.g., "WUZERVON") from the list to pair.
  4. Once paired, you can stream audio wirelessly.

Video: Demonstration of Bluetooth pairing and audio playback with the ZK-TB22 amplifier board.

6.2 Input Selection

The amplifier automatically prioritizes Bluetooth. If you wish to use AUX, PC, or USB input, ensure your Bluetooth device is disconnected from the amplifier.

6.3 Volume and Tone Adjustments

Use the integrated or external potentiometers to adjust the audio output:

  • Left and Right Channels Volume: Adjusts the overall volume for the main speakers.
  • Subwoofer Volume: Controls the volume level of the subwoofer output.
  • Subwoofer Frequency: Adjusts the crossover frequency for the subwoofer.
  • High Pitch Adjustment: Modifies the treble frequencies.
  • Bass Adjustment: Modifies the bass frequencies.

7. Maintenance

To ensure the longevity and optimal performance of your ZK-TB22 amplifier board:

  • Keep the board clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid exposing the board to moisture, extreme temperatures, or direct sunlight.
  • Ensure proper ventilation, especially if operating at high power levels, to prevent overheating.

8. Troubleshooting

If you encounter issues with your amplifier board, consider the following:

  • No Power: Check the power supply connections and ensure the voltage is within the specified range (12-24VDC) and current is sufficient.
  • No Sound: Verify all speaker and input connections. Ensure Bluetooth is properly paired or disconnected if using other inputs. Check volume levels on both the amplifier and your source device.
  • Distorted Sound: Ensure the power supply is adequate and stable. Check speaker impedance compatibility. Reduce volume if distortion occurs at high levels.
  • Bluetooth Connection Issues: Ensure the amplifier is within the 15-meter transmission distance. Disconnect and re-pair the device.
  • Overheating: Ensure adequate ventilation. Consider installing an optional 12V fan if operating in demanding conditions.

9. User Tips

Based on general usage recommendations:

  • For best audio quality and to prevent damage, always use a power supply that meets or exceeds the recommended specifications (24V, 10A or above).
  • Experiment with the tone adjustments (high pitch, bass, subwoofer frequency) to find the sound profile that best suits your speakers and listening preferences.
  • When integrating into a car audio system, ensure secure mounting and proper wiring to avoid vibrations and electrical interference.

10. Warranty and Support

For warranty information, technical support, or any product-related inquiries, please contact the seller or manufacturer directly. Keep your purchase records for reference.

An official user manual in PDF format is available for download. Please refer to the product page or contact customer support for the link.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.