Flytec V802 Pro

Contents

Flytec V802 Pro GPS Fishing Bait Boat User Manual

Model: V802 Pro | Brand: Flytec

1. Introduction

Thank you for choosing the Flytec V802 Pro GPS Fishing Bait Boat. This remote-controlled bait boat is designed to enhance your fishing experience with advanced features such as GPS positioning, multiple bait hoppers, and a long-range remote control. Please read this manual carefully before operation to ensure safe and efficient use of your product.

Video: Flytec V802 Pro GPS Bait Boat in action, demonstrating features like bait release, GPS navigation, and remote control.

2. Product Overview

2.1. Package Contents

Before starting, please verify that all items are included in your package:

Product List for Flytec V802 Pro GPS Bait Boat

Image: Contents of the Flytec V802 Pro GPS Bait Boat package.

  • 1 x V802 Pro GPS Bait Boat
  • 1 x Controller (Remote Control)
  • 1 x 7.4V Battery (or 2 depending on configuration)
  • 2 x Antennas
  • 1 x Instruction Manual
  • 2 x Control Sticks
  • 2 x Propellers
  • 1 x Remote Control Back Cover Screw
  • 1 x Hanging Rope
  • 1 x USB Cable

2.2. Boat Components

Diagram of Flytec V802 Pro Bait Boat components

Image: Labeled diagram of the V802 Pro bait boat, showing headlights, indicators, switches, handle, antennas, bait silos, motors, propellers, and hook.

  • Headlight: Front illumination for night navigation.
  • Indicator: Status lights.
  • Switch: Power on/off for the boat.
  • Handle: For carrying the boat.
  • Antenna: Dual antennas for enhanced signal transmission and reception.
  • Back Dual Silos: Rear bait hoppers.
  • Rear Light: Tail illumination for night navigation and direction indication.
  • Front Dual Silos: Front bait hoppers.
  • Motor & Propeller & Waterproof Grass Cover: Propulsion system with protection.
  • Hook: Attachment point for fishing line or fish finder.

2.3. Remote Control Components

Diagram of Flytec V802 Pro Remote Control components

Image: Labeled diagram of the remote control, showing joysticks, buttons, and LCD screen.

  • Antenna: For remote control signal.
  • Lighting Button: Controls boat lights.
  • Battery Indicator: Displays remote control battery level.
  • Left Joystick: Controls boat movement (forward/backward, left/right).
  • Front Left Silo Button: Releases bait from the front left hopper.
  • Switch: Power on/off for the remote control.
  • Back Left Silo Button: Releases bait from the back left hopper.
  • Calibration Button: Initiates boat calibration.
  • Cruise Button: Activates/deactivates cruise control.
  • Original Point Button: Sets or returns to the original point.
  • Delete Button: Clears stored positioning points.
  • Fishing Ground Button: Selects fishing grounds.
  • Right Joystick: Controls boat movement (forward/backward, left/right).
  • Front Right Silo Button: Releases bait from the front right hopper.
  • Back Right Silo Button: Releases bait from the back right hopper.
  • OK Button: Confirms selections.
  • Up/Left/Right/Down Buttons: Navigation for menu/settings.
  • LCD Screen: Displays boat status, distance, GPS information, and battery levels.

3. Setup

3.1. Antenna Installation

Before using the bait boat, both antennas must be installed simultaneously on the boat.

3.2. Battery Installation and Connection

The boat has a built-in battery. Simply connect the battery connector when using it. For extended operation, the dual battery compartment allows for two batteries to be connected simultaneously, significantly prolonging working time.

Dual battery compartment for Flytec V802 Pro

Image: Illustration of the dual battery compartment, accommodating two 5200mAh or 12000mAh batteries.

3.3. Remote Control Battery

The remote control requires 4xAA batteries (not included). Insert them into the remote control's battery compartment.

3.4. Power On and Pairing

  1. Place the boat on flat ground, ensuring the remote control is at least 0.5 meters away from the boat.
  2. Turn on the boat's power switch first. Observe the tail light flashing.
  3. Next, turn on the remote control.
  4. When the remote control emits a "beep" sound, the indicator light on the remote control will turn solid green, and the boat's lights will be continuously on. This indicates successful pairing.
  5. If pairing is unsuccessful or the remote control disconnects from the boat, turn off both the boat and remote control, then repeat the pairing process.

3.5. Calibration

The boat needs to be calibrated before use. After successful pairing, the GPS satellite icon will appear on the remote control screen, and the number next to it should be greater than 8. This indicates sufficient GPS signal for calibration.

  1. Drive the boat a few meters away from the shore.
  2. Press the Calibration button on the remote control. The boat will turn left and right in the water.
  3. Once calibration is complete, the boat will stop turning, and the remote control will emit two "beep" sounds.

4. Operating Instructions

4.1. Remote Control Screen Information

The remote control's LCD screen provides real-time information about the boat's status. Refer to the detailed icon explanations below:

Icon/FeatureDescription
Boat Light IconIndicates boat lights status (always on, flashing, or off).
Compass IconShows the boat's heading after calibration (default N if not calibrated).
Boat & Remote Power IconsLeft: Boat battery power; Right: Remote control battery power.
GPS Signal IconDisplays when GPS signal is acquired, with a number indicating satellites.
Boat Driving Direction IconIndicates boat movement direction (forward/backward, left/right, cruise).
Positioning Point IconNumbers around represent positioning point coordinates (up to 40 points across 5 pages).
Distance IconDisplays distance to the original point or between two positioning points during cruise.
Fishing Ground IconABCD represents 4 fishing grounds. Must be set before positioning points.
Original Point IconHouse icon represents the original point. Must be set for return function.

4.2. Bait Loading and Release

The V802 Pro features 4 independent bait silos with a maximum bait load capacity of 3KG. You can load various types of bait such as corn, bait particles, or mixed bait.

Four independent bait silos on the Flytec V802 Pro

Image: The four independent bait silos of the V802 Pro, capable of holding various baits.

To release bait, press the corresponding silo button on the remote control. The silo will open, releasing the bait. You will need to manually restore the silo after baiting.

Inverted bait display showing bait release

Image: The bait boat releasing bait from its hoppers into the water.

4.3. GPS Positioning and Fixed-Point Baiting

The boat utilizes a multi-satellite hybrid engine positioning system (GPS L1, GALILEO E1, G1SBAS L1, GLONASS, QZSS L1, BEIDOU B1) with a high-sensitivity electronic compass sensor for accurate positioning within 1 meter. It can store up to 160 positioning points across 4 fishing grounds.

Fixed-point baiting and automatic return diagram

Image: Diagram illustrating fixed-point baiting and automatic return functionality with numbered points.

  1. Setting Fishing Grounds: After calibration, select a fishing ground (A, B, C, or D) using the Fishing Ground button.
  2. Setting Original Point: Ensure GPS satellites are >8. The boat should be at the shore. Select the origin icon on the remote control and press the 'Coordinate Setting Key' to confirm. The origin icon will flash then stay on.
  3. Setting Positioning Points: Drive the boat to the desired location. Select a digital fixed point (e.g., point 1) and press the 'Coordinate Setting Key' to set it. The selected point will flash then stay on. You can set up to 40 points per fishing ground.
  4. Positioning Point Cruise: Select a desired positioning point on the remote control and press the Cruise button. The boat will automatically navigate to that point. The remote control screen will display the distance to the target point. Once reached, the boat will stop, and the remote control will beep twice. To cancel cruise, long-press the Cruise button.

4.4. Cruise Control (Fixed-Speed)

To activate fixed-speed cruise control, push both joysticks forward for approximately 5 seconds. The boat icon on the remote control screen will light up in the middle and flash on both sides. You can still perform left and right turns in cruise mode. To exit, push both joysticks backward.

Cruise mode activation diagram

Image: Diagram showing how to activate and deactivate cruise mode using the remote control joysticks.

4.5. One-Key Return

Press the Original Point button on the remote control. The boat will automatically return to the set original point. The original point icon on the remote control will flash during return and become solid once the boat reaches the origin. To cancel the return function midway, long-press the Cruise button.

4.6. Electronic Fence Function

After setting the original point, the boat will activate the electronic fence function. This prevents the boat from sailing out of a safe distance of 500 meters from the origin, ensuring it stays within controllable range.

Remote control distance and electronic fence function

Image: Illustration of the 500-meter control distance and electronic fence function.

4.7. Night Lights

The boat is equipped with bright night lights at the bow (waterproof headlight) and blue/red rear lights (turn signal lights) for safer night navigation. The rear lights automatically change according to the sinking boat's signal power status, providing clear warning signals.

Blue and red night lighting on the bait boat

Image: Close-up of the boat's front and rear lights, showing blue and red illumination for night use.

Short press the Lighting button on the remote control to cycle through light modes: "steady on" - "flashing" - "off". The light icon on the remote control display will switch accordingly.

4.8. Fish Finder Integration (Optional)

The stern of the boat features a hook attached design, allowing it to be upgraded to a fish finder version. This enables real-time detection of fish location, improving fishing efficiency.

Stern hook design for fish finder integration

Image: Close-up of the stern hook design, showing how a fish finder can be attached.

4.9. Clearing Positioning Points

To clear all stored fishing spot coordinates, press and hold the Clear button on the remote control. To clear a single positioning point, select its number on the screen and then short-press the Clear button. The corresponding number box will disappear.

5. Maintenance

5.1. Remote Control Care

  • Remove batteries from the remote control when not in use for a long time to prevent leakage.

5.2. Motor Care

  • After each use, check the motors and propellers for any entanglements (e.g., weeds, fishing line) and remove them to ensure optimal performance and prevent damage.

5.3. Boat Hull Care

  • After use, wipe off any moisture to keep the hull dry and clean.
  • If the boat battery is not used for a long time, remove it and charge it for storage.
  • Do not store corrosive liquids or items together with the boat.
  • Keep the boat away from high-temperature objects.
  • When not in use, store the bait boat in a clean, dry place to prevent it from getting dusty.

5.4. Accessory Replacement

If you need to replace the boat circuit board, GPS module, or remote control, you must re-pair the frequency after replacement. Then, press and hold the Calibration button until the boat light flashes and turns off. After this, the boat can be used normally.

6. Troubleshooting

ProblemPossible CauseSolution
Boat not pairing with remote controlIncorrect power-on sequence, interference, or remote control/boat not in pairing mode.Ensure remote control is 0.5m away from boat. Turn on boat first, then remote. If unsuccessful, turn off both and retry.
Boat motors spin then stop (or faulty operation)Low battery, remote control issue, motor entanglement, or internal fault.Check boat and remote control battery levels. Ensure remote is paired. Check motors/propellers for debris. If problem persists, contact support.
Low battery warning (remote control)Remote control battery is low.Replace the 4xAA batteries in the remote control.
Low battery warning (boat)Boat battery is low.Return the boat to shore and recharge the battery. The boat will automatically return to the original point if power is critically low (if original point is set).
Lost signal / Boat out of rangeBoat has lost connection with remote control or exceeded 500m range.If an original point is set, the boat will automatically return. Ensure you operate within the 500m range. Check for signal interference.
Boat not navigating straight (yaw correction)Gyroscope system needs calibration or is affected by external factors.Perform boat calibration as described in section 3.5. Ensure no heavy loads or strong currents are affecting stability.
Physical damage (e.g., broken plastic)Impact or manufacturing defect.Contact customer support for repair or replacement options.

7. Specifications

Flytec V802 Pro Boat Information Table

Image: Detailed specifications table for the V802 Pro GPS Bait Boat.

FeatureDetail
Model No.V802 PRO
Bait Load Capacity3KG
Boat Size (L*W*H)52.7cm * 26.4cm * 50cm (approx. 20.6in * 10.4in * 19.7in)
Motor Type390 Powerful Motor
Control Distance500 meters
Charging Time6h/8h/10h (depending on battery capacity)
Playing Time2h/4h/6h (depending on battery capacity)
MaterialABS Material
ColorBlack/Orange
Net Weight2219g
Boat Battery7.4V 5200mAh / 12000mAh / 18000mAh (various options)
Control Battery4xAA Battery (Not Included)
GPS PositioningMulti-satellite hybrid engine (GPS L1, GALILEO E1, G1SBAS L1, GLONASS, QZSS L1, BEIDOU B1)
Positioning PointsUp to 160 anchor points across 4 fishing grounds
WaterproofFully sealed cabin and battery compartment, 5-level wind resistant seamless hull

8. User Tips

  • Extend Runtime: For significantly longer operating times, utilize the dual battery compartment by connecting two batteries simultaneously.
  • Charger Compatibility: Note that the charger provided may not be a standard USB type. Ensure you use the correct charger for your battery.
  • Pre-use Check: Always perform a quick check of the boat and remote control before each use, especially verifying battery levels and propeller clear of debris.
  • GPS Signal: For optimal GPS functionality, ensure you have a clear view of the sky and wait for the remote control to show sufficient satellite connections (GPS icon > 8) before setting points or using GPS features.

9. Warranty and Support

For any issues not covered in this manual, or for warranty claims and technical support, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

A detailed user manual in PDF format is available for download: View User Manual (PDF)


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.