1. Product Overview
The Flytec V803 GPS Fishing Bait Boat is an advanced remote-controlled vessel designed for efficient and precise baiting in various fishing environments. It features GPS positioning, a long-range remote control, multiple bait silos, and a robust design for reliable operation.
Key Features:
- GPS Positioning: 200 positioning points for precise bait delivery and return.
- Remote Control: 500m remote control distance with a portable color screen.
- Bait Capacity: Four independently controlled bait silos with a total load capacity of 3KG.
- Power System: Dual power supply option with 7.4V 12000mAh battery (optional 5200/18000mAh) for extended operation (2-6 hours).
- Navigation: Bright night lights for visibility, fixed-speed cruise control, and one-button smart return.
- Stability: Built-in gyroscope for enhanced resistance to wind and waves.
- Durability: ABS construction with anti-entanglement baffles for propellers.
Package Contents:
Please check the package carefully to ensure all items are present:
- Boat x1
- Boat Battery x1
- Controller x1
- Hanging Rope x1
- USB Cable x1
- Type-C Controller Charging Cable x1
- Antenna x2
- Instruction Manual x1
- Propeller x2

Boat Hull Part Description:

- Handles: For carrying and maneuvering the boat.
- Antenna: Dual antennas for stable 500m long-distance signal reception.
- Front Double Bin: One of the four bait silos.
- Rear Double Bin: One of the four bait silos.
- Stern Light: Navigation light at the rear of the boat.
- Hanging Ring: For attaching accessories or retrieval.
- Motor & Propeller & Waterproof Grass Cover: Dual drive system with anti-entanglement baffles.
- Battery Indicator: Displays the boat's current battery level.
- Switch: Power switch for the boat.
- Headlight: Bright night navigation lights at the front.
Remote Control Button Details:

- Joystick: Controls boat direction (left, right, forward, backward).
- Cruise Button: Activates/deactivates fixed-speed cruise control.
- Calibration Button: Initiates geomagnetic calibration.
- Fishing Ground Button: Selects fishing grounds (A, B, C, D).
- Cursor Left/Right: Navigates through positioning points.
- Speed/Electronic Anchor Button: Switches speed modes or sets electronic anchor points.
- Baiting Button: Controls bait silo release.
- Origin Button: Sets or returns to the home origin point.
- Clear Button: Clears selected or all positioning points.
- Light Button: Controls boat lights (on/blink/off).
- OK Button: Confirms selections or long press to clear origin.
- Switch: Power switch for the remote control.
Screen Display Instructions:

- Satellite Signal: Appears after frequency pairing and GPS signal acquisition.
- Number Of Satellite Searches: Displays '00' at power-on, updates in real-time when 8 or more satellites are found.
- Compass: Indicates the direction of the boat's bow.
- Boat Light: Reflects the boat's light status (always on, blinking, off).
- Boat Battery Level: Shows the boat's current battery level after pairing.
- Remote Control Battery Level: Shows the remote control's current battery level after power-on.
- Hull Direction: Lights blue after pairing, indicates boat's travel status (left, right, straight, reverse). Flashes during fixed-speed cruise.
- Distance From Location Point: Displays remaining distance to a set fixed point. Shows '0' when reached.
- Origin: Displays blue when home position is set. Flashes when returning to origin, stops blinking when at origin.
- Distance From The Origin: Real-time distance from the boat's origin.
- Fishing Ground Number: A, B, C, D represent 4 fishing grounds. Select one before setting fixed points.
- Bin: White by default after pairing, blue when selected, blinking red when popped up, returns to white when complete.
- Location Point: All digits are lit when entering selection. Default is No.1 point for first-time entry. Selected point's background light is bright, numbers flash. After setting, background light is bright, numbers are always on.
2. Setup Instructions
2.1 Power-On Pairing
Before first use, ensure the antennas are installed on both the boat and the remote control. Place the boat on a flat, stable surface and keep the remote control at least 0.5 meters away from the boat.
- First, turn on the hull power switch on the boat.
- Then, press and hold the power button on the remote control for 3 seconds to turn it on. (To turn off the remote control, press and hold the power button for another 3 seconds).
- During the frequency pairing process, the boat's tail light will flash red and blue alternately.
- Once pairing is successful, the front white lights will be continuously on, and the rear blue lights will be continuously on.
Note: If pairing fails or the remote control disconnects from the boat, you must turn off both the boat and the remote control, then repeat the pairing process.

2.2 Remote Control Pushbutton Lighting
The remote control buttons have a backlight for operation in low-light conditions.
- Short press the remote control power button to toggle the button backlight on or off.
- The button backlight is on by default when the remote control is powered on.
2.3 Calibration
The boat requires calibration before use to ensure accurate navigation and GPS functions. Calibration can only be performed after successful frequency pairing, when the remote control displays the satellite signal icon and has detected 8 or more satellites.
- Short press the Calibration key on the remote control to enter geomagnetic automatic calibration mode.
- Sail the boat approximately 5-6 meters away from the shore.
- Press the Calibration key again. The boat will then turn around to the left and then to the right on the water surface.
- The boat will stop rotating once the calibration process is complete.

2.4 Fishing Ground Setup
After successful calibration, you will be prompted to enter the fishing field selection mode.
- Short press the Fishing Ground key to cycle through the four available fishing grounds: A, B, C, and D.
- When selecting a fishing ground, its corresponding letter's background will be grey and bright.
- The currently selected fishing ground (by the Fishing Ground key) will have a bright blue background and its letter will be blinking.
- Unselected fishing grounds will have a grey and bright background with their letters continuously lit.
- Once you have selected your desired fishing ground, press the OK key to confirm. The selected letter will stop blinking, and its blue background will remain lit, indicating successful selection.

3. Operating Instructions
3.1 Origin Setting and One-Touch Return
The home origin point can only be set after the boat has been calibrated and a fishing ground has been selected.
- Sail the boat to your desired starting point on the shore.
- Short press the Origin key on the remote control to set the current location as the origin. The origin icon on the screen will light up in blue.
- To return the boat to the set origin point, press and hold the Origin key for 3 seconds.
- While returning to the origin, the origin icon will blink blue.
- The icon will stop blinking once the boat reaches and stops at the origin.

3.2 Setting Positioning Points
After setting the home origin, you can define specific positioning points for baiting.
- Sail the boat to your target positioning location.
- Tap or press any cursor key once to enter the positioning point selection interface. All numbers on the screen will be continuously lit.
- The first time you enter, point No.1 of the current fishing ground will be selected by default. The background light of the selected point will be bright, and its numbers will blink.
- After a point is set, its background light will be bright, and the numbers will be continuously lit. If a point is not set, the numbers will be continuously lit, but the background light will be off.
- Use the left and right cursor keys for a short press to jump to a single spot, or a long press for 3 seconds to jump quickly to a spot.
- After selecting a fishing ground, press the OK key to confirm.
- The system automatically remembers the last cursor position when you re-enter the positioning point selection.
Each fishing ground can store up to 50 positioning points, organized into five columns and two rows, with 10 points displayed per page, allowing for 5 pages of points.

3.3 Fixed-Point Cruise
Once positioning points are set, you can use the fixed-point cruise function.
- Select the desired fixed point by moving the cursor.
- Short press the Fixed-Point Cruise key. The boat will automatically navigate to the selected fixed point.
- To cancel the cruise, long press the Fixed-Point Cruise key.
- During cruise, the corresponding numeric icon will flash, and the distance to the fixed point and home point will be displayed simultaneously.
- When the boat reaches the cruise point, the distance to the fixed point will show as 0m, and the remote control will emit a short "di-di" beep, then stop.

3.4 Clear Button Function
The Clear button allows you to manage your positioning points.
- When the cursor selects a specific positioning point, a short press on the Clear key will clear that individual point.
- To clear all positioning points in the current fishing ground, press and hold the Clear button for more than 3 seconds.
3.5 Fixed-Speed Cruise Control
This feature allows the boat to maintain a constant speed.
- To activate: Push the joystick forward for more than 5 seconds. The cursor on the remote control screen will blink.
- To exit: Push the joystick backward. The cursor will remain continuously on when not in fixed-speed cruise mode.

3.6 Lighting Switching
The boat's lights can be controlled via the remote.
- After frequency pairing, the lights are always on by default (front white, tail blue).
- A short press of the Light button cycles through 'Always on', 'Blinking', and 'Off' states. The remote control light icon will reflect the current state.
- If the boat's power is low, the tail light will blink red.
- If the boat is not linked or disconnected, the tail lights will blink red and blue alternately.
3.7 Speed Switching
The boat has two speed modes.
- Short press the Speed Switching key to toggle between the first and second gear.
- Switching to second gear will be accompanied by a "di-di" beep.
- Switching back to first gear will be accompanied by a "di" beep.
3.8 Bin Button Operation
The bait silos can be controlled independently.
- The first short press of the Bin button enters the bin selection state. The right front bin is selected by default.
- The selected bin will light up blue.
- Press the OK button to eject the selected bin. The ejected bin will light up red and then return to white once the operation is complete.
- The numerical order shown on the remote control screen indicates the order of bin selection.

3.9 Electronic Anchor Mode
The electronic anchor function allows the boat to resist currents and wind, remaining fixed at a designated location.
3.9.1 Setting Electronic Anchor Points
There are two scenarios for setting an electronic anchor point:
Scenario 1: Pre-set point is already a positioning point.
- Select the desired positioning point using the cursor keys.
- Press and hold the Speed key. The selected point on the screen will turn blue, indicating the electronic anchor point has been successfully set.
Scenario 2: Pre-set point is NOT a positioning point.
- Navigate the boat to the desired electronic anchor location.
- Use the cursor keys to select any unassigned positioning point on the screen.
- Press and hold the Speed key until the selected point displays a blue background, confirming the electronic anchor point has been successfully set.


Note: Once the electronic anchor point is set, the cursor lock cannot be moved left or right, the Clear key will not function, and long pressing the joystick will not activate cruise control. Only the Light key, OK key, and hopper selection key functions remain active.
3.9.2 Exiting Electronic Anchor Mode
To exit electronic anchor mode, press and hold the Speed key until the positioning interface is restored on the remote control screen.
4. Charging Instructions
4.1 Boat Battery Use and Charging
The boat uses a 7.4V battery (one included as standard). It supports dual power supply, allowing two batteries to be connected simultaneously to double the usage time (approx. 2-6 hours).

To charge the boat battery, connect it to any compatible power cable. Charging time for 5200mAh, 12000mAh, and 18000mAh batteries is approximately 6, 8, and 10 hours respectively.
4.2 Remote Control Charging
The remote control has a built-in rechargeable battery.
- When the remote control's battery is low, it will emit a continuous ticking sound.
- Connect the Type-C Controller Charging Cable to recharge the remote control.

5. Care and Maintenance
5.1 Motors and Propellers
- After each use, always check the motors and propellers for any tangled debris such as fishing lines, weeds, or other foreign objects. Remove any obstructions carefully to prevent damage.
5.2 Boat Hull

- After each use, wipe down the boat hull with a clean cloth to remove any water, dirt, or residue. Ensure the boat is completely dry before storage.
- If the battery will not be used for an extended period, remove it from the boat and charge it to a storage level (typically 50-60% charge) before storing. This helps prolong battery life.
- Do not store corrosive liquids or other items that could damage the boat's materials near the boat.
- Keep the boat away from high-temperature objects or direct sunlight for prolonged periods, as this can deform or damage the ABS material.
- When not in use, store the boat in a clean, dry place to prevent dust accumulation and protect it from environmental elements.
6. Troubleshooting
This section provides solutions to common issues you might encounter.
| Problem | Indication | Solution |
|---|---|---|
| Low Boat Battery | Boat emits continuous "di-di" (one long, one short) beep. Stern indicator light flashes red. | Recharge the boat battery immediately. |
| Low Remote Control Battery | Remote control emits continuous "di-di" (long beep) sound. | Recharge the remote control battery. |
| Frequency Interruption | Remote control emits continuous "di-di" (short beep) sound. | Check remote control and boat connection. Re-pair if necessary. |
| Lost Contact / Disconnection | Boat's tail lights blink red and blue alternately. Boat automatically returns to the set home origin point (if origin was set). | Ensure remote control is within range and has sufficient battery. Re-pair the boat and remote control. |
| Pairing Failure | Tail lights flash red and blue alternately, and pairing does not complete. | Turn off both the boat and the remote control, then repeat the power-on pairing procedure. Ensure remote is within 0.5m of boat during pairing. |
| Calibration Issues | Boat does not calibrate correctly, or remote does not show satellite signal icon / less than 8 satellites. | Ensure boat is in an open area with clear sky for GPS signal. Wait for sufficient satellites (8+) to be acquired before attempting calibration. |
| Propeller Entanglement | Boat movement is restricted or abnormal. | Retrieve the boat and carefully check the propellers for any tangled debris. Remove obstructions. |
7. Specifications
Detailed technical specifications for the Flytec V803 GPS Fishing Bait Boat.
| Feature | Specification |
|---|---|
| Item No. | V803GPS |
| Material | ABS |
| Bait Load | 3 KG |
| Color | Black |
| Boat Size | 55cm x 26.8cm x 20cm (21.65in x 10.55in x 7.87in) |
| Net Weight | 2279g (5200mAh Version) |
| Battery | 7.4V 5200/12000/18000 mAh (optional) |
| Control Distance | 500 m |
| Playing Time | 2-6 hours (depending on battery capacity and usage) |
| Number of Silos | 4 |
| Charging Time | 6-10 hours (depending on battery capacity) |
| Number of Positioning Points | 200 (4 fishing grounds, 50 points each) |

8. User Tips
- Maximize Battery Life: Utilize the dual power supply option by connecting two batteries simultaneously for extended operating time, especially during longer fishing sessions.
- Night Operation: The bright night navigation lights and backlit remote control buttons ensure clear visibility and operation even in dark conditions.
- Stable Baiting: The built-in gyroscope provides strong resistance to wind and waves, helping the boat maintain a straight course and ensuring precise bait delivery in challenging conditions.
- GPS Accuracy: For optimal GPS performance and calibration, operate the boat in an open area with a clear view of the sky to ensure sufficient satellite acquisition.
- Bait Variety: The 3KG load capacity and four separate bait silos allow for diverse baiting strategies, accommodating mixed bait, corn kernels, and pellet bait.
9. Frequently Asked Questions (FAQ)
- Q: Is the GPS function effective?
- A: Yes, the V803 GPS system is designed for precise positioning with 200 programmable points across 4 fishing grounds. It includes features like one-button return and automatic return for low power or disconnection, indicating reliable GPS functionality.
- Q: What is the maximum speed the boat can reach?
- A: The boat features a dual-speed switch with two modes: a slow mode for calm waters and a faster mode for strong winds and waves. Specific maximum speed in km/h or mph is not provided, but the dual-drive system is described as providing strong, stable power.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official product page or contact the seller directly. Keep your purchase receipt as proof of purchase.
A detailed user manual in PDF format is available for download: View User Manual (PDF)