1. Important Safety Precautions
To reduce the risk of severe injuries, carefully read all instructions and warnings before using the treadmill. Keep this manual for future reference.
- Consult Your Doctor: Before starting any workout program, consult your doctor, especially if you are over 35, have health problems, or are pregnant.
- Proper Placement: Place the treadmill on a flat, stable surface in a well-ventilated area, away from dust, humidity, and water. Do not store in a garage or near water sources.
- Child and Pet Safety: Keep children under 12 years old and pets away from the equipment at all times. Maintain a safe distance.
- Weight Limit: Do not exceed the maximum user weight of 136 kg (300 lbs). Exceeding this limit can cause malfunctions and void the warranty.
- Power Supply: Ensure the power cord and plug are in good condition. Connect to a grounded outlet. Keep power cords away from hot surfaces. Unplug the treadmill after use, before cleaning, and before performing any maintenance.
- Unattended Operation: Never leave the machine unattended while it is working.
- Immediate Stop: If you experience pain or dizziness during training, stop immediately.
- Lubrication: Correct lubrication of the treadmill is crucial. Perform lubrication regularly, even before first use, depending on usage frequency.
- Packaging Preservation: Preserve the original packaging with its protections, purchase receipt, manual, and components during the guarantee period.
Environmental Disposal
This electronic product must not be disposed of with municipal waste. To preserve the environment, recycle this product after its useful life as required by law. Contact your local council for more information on recycling procedures.
2. Package Contents
Carefully unpack all components and ensure everything listed below is present.
| No. | Item | Quantity |
|---|---|---|
| 1. | Main frame | 1 |
| 2. | M8*20 knob | 2 |
| 3. | M10*40 knob | 2 |
| 4. | 5mm Wrench | 1 |
| 5. | 6mm Wrench | 1 |
| 6. | Multi Wrench | 1 |
| 7. | User's Manual | 1 |
| 8. | Security Key | 1 |
3. Assembly Instructions
Assembly requires two people. Place all fittings beside the machine on a flat floor.
Step 1: Unpacking and Initial Setup
- With two people, carefully remove the machine from its packaging and place it gently on a flat floor.
- Lift up the stand tube and computer panel. Ensure not to press or damage the signal wire during this process.
- Insert the two M10*43 knobs to securely fasten the stand tube.
Step 2: Panel and Safety Key Installation
- Insert two M8*20 screws with two flat washers to fasten the connection between the panel and the stand tube.
- Place the safety key in its designated position on the console.
- Once assembled, turn on the power switch to start the machine.
4. Operating the Treadmill
Control Panel Overview
The control panel features an LED screen, handrail controls, and various buttons for operation.

Image: Treadmill console with display, controls, and storage rack.
- POWER ON: Main power switch.
- SAFETY KEY: Must be in place for the treadmill to operate.
- START: Press to begin your workout.
- STOP: Press to end your workout.
- MODE: Cycles through different display modes (Time, Distance, Calories) and countdown settings.
- PROGRAM (PROG.): Selects pre-set workout programs (P01-P12).
- SPEED +/-: Adjusts the running speed.
- Handrail Controls: Integrated buttons on the handrails allow for quick speed adjustments and one-touch start/stop.
- Heart Rate Sensor: Built-in sensors on the handrails monitor your pulse rate.
Starting a Workout
- Ensure the safety key is properly placed on the console.
- Press the START button. The belt will begin to move at a low speed.
- Use the SPEED +/- buttons to adjust to your desired speed.
Using Programs and Modes
- Manual Mode: Default mode. Adjust speed manually.
- Time Countdown: Press MODE until
