Estardyn 1.8 TFT

Contents

Estardyn 1.8 Inch Round Color TFT LCD Display Module User Manual

Model: 1.8 TFT

1. Product Overview

The Estardyn 1.8 Inch Round Color TFT LCD Display Module is a compact, high-resolution display designed for various embedded projects, particularly DIY smart watches. It features a 360x360 pixel resolution, full-color capability, and utilizes the ST77916 driver IC with SPI/QSPI interface for efficient communication with microcontrollers.

Estardyn 1.8 Inch Round Color TFT LCD Display Module displaying weather information
Figure 1: Front view of the Estardyn 1.8 Inch Round Color TFT LCD Display Module displaying weather information.

2. Setup and Connection

2.1 Pin Definition

The module features an 11-pin interface for power, control, and data transmission. Refer to the table below for detailed pin functions:

PIN SYMBOL FUNCTION
1GNDPower Ground
2VCCPositive Power Supply (3-5V)
3SCLClock (SPI/QSPI)
4IO0Write Command / Data
5IO1Read Data / Status
6IO2Data Transmission
7IO3Data Transmission
8RSTLCD Reset Pin
9CSChip Select Signal
10BLBacklight Control
11TEFrame Sync

Note: This pin definition is also available in the product parameters image.

2.2 Reference Circuit Diagram

For proper integration, refer to the reference circuit diagram below. This diagram illustrates typical connections for power filtering, voltage stabilization, and backlight control, which are crucial for stable operation.

Reference circuit diagram for the Estardyn 1.8 Inch Round Color TFT LCD Display Module
Figure 2: Reference circuit diagram showing power, voltage stabilization, and backlight control.

2.3 Software and Driver Installation

To operate the display, you will need to interface it with a microcontroller (e.g., Arduino, ESP32, Raspberry Pi) using the SPI or QSPI protocol. The display uses the ST77916 driver IC. You will typically need to:

  1. Install a compatible graphics library for your chosen microcontroller platform (e.g., Adafruit GFX library, TFT_eSPI for ESP32).
  2. Configure the library to use the ST77916 driver and specify the correct pin connections (CS, RST, SCL, IO0-IO3, BL, TE).
  3. Initialize the display with the correct resolution (360x360) and orientation.

Consult the documentation for your specific microcontroller and chosen library for detailed programming instructions and example code.

3. Operating the Display Module

Once connected and initialized, the display module can be used to render various graphical elements. The SPI/QSPI interface allows for high-speed data transfer, enabling smooth animations and complex graphics.

  • Displaying Text: Use the graphics library functions to draw text at specified coordinates, with customizable fonts and colors.
  • Drawing Shapes: Create lines, rectangles, circles, and other geometric shapes.
  • Displaying Images: Load bitmap images or other graphical assets into the display's memory.
  • Backlight Control: The BL pin can be used to control the backlight brightness, often via PWM, to conserve power or adjust visibility.

Refer to your chosen graphics library's API documentation for specific functions and examples on how to draw and manipulate content on the display.

4. Maintenance

  • Cleaning: Gently wipe the display surface with a soft, lint-free cloth. For stubborn smudges, use a small amount of isopropyl alcohol on the cloth. Avoid abrasive materials or harsh chemicals.
  • Handling: The display module is a delicate electronic component. Avoid applying excessive force or bending the PCB. Always handle by the edges.
  • Static Electricity: Take precautions against electrostatic discharge (ESD) when handling the module, as it can damage sensitive components. Use an anti-static wrist strap and work on an ESD-safe surface.
  • Storage: Store the module in its original packaging or an anti-static bag in a dry, cool environment away from direct sunlight.

5. Troubleshooting

Display is blank or shows no image:
  • Verify power supply (VCC and GND) is correctly connected and within the 3-5V range.
  • Check all data and control lines (SCL, IO0-IO3, RST, CS, BL, TE) for proper connection to your microcontroller.
  • Ensure the backlight (BL pin) is enabled, either by connecting it to VCC or controlling it via software.
  • Confirm that the display driver (ST77916) is correctly initialized in your software.
  • Inspect the ribbon cable connecting the LCD panel to the PCB for any visible damage or improper seating.
Incorrect colors or distorted image:
  • Check your software's color depth and pixel format settings.
  • Ensure the correct display orientation and rotation settings are applied if your image appears rotated or mirrored.
  • Verify that the data transmission lines are not experiencing interference or signal integrity issues.
Module not responding to commands:
  • Confirm the SPI/QSPI communication protocol is correctly implemented (clock speed, data mode).
  • Check the Chip Select (CS) and Reset (RST) pins for proper toggling and timing.

6. Specifications

Detailed technical specifications for the Estardyn 1.8 Inch Round Color TFT LCD Display Module:

Product parameters table for Estardyn 1.8 Inch Round Color TFT LCD Display Module
Figure 3: Product parameters table.
Parameter Value
Size1.80 inch
Resolution360x360
Driver ICST77916
InterfaceQSPI
Supply Voltage (V)3-5V
Brightness180 cd/m²
ColorFull Color
Overall Dimension50.7759 x 31.52 mm
AA Size45.68 x 45.68 mm
Low Temperature-20°C
High Temperature+70°C
ESDAir: ±8KV, Contact: ±4KV (GB/T1762.6-2018)
Power Consumption336 mW
CertificationsISO9001 / ROHS / CE

7. User Tips

  • Initial Inspection: Upon receiving the module, carefully inspect it for any physical damage, especially around the header pins and the flexible ribbon cable. Damage to these components can prevent the display from functioning correctly.
  • Careful Handling: The display and its connections are delicate. Exercise caution during soldering, wiring, and mounting to avoid bending or tearing the ribbon cable or damaging the pins.
  • Secure Packaging: The module is typically shipped in protective packaging. Retain this packaging for safe storage or transport if needed.

8. Warranty and Support

For technical support, troubleshooting assistance beyond this manual, or inquiries regarding product warranty, please contact the seller or manufacturer directly. Provide your purchase details and a clear description of the issue to facilitate a quicker resolution.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.