THINKCAR THINKSCAN 689BT PRO

Contents

THINKCAR THINKSCAN 689BT PRO Auto Diagnostic Tool User Manual

1. Product Overview

The THINKSCAN 689 is a next-generation intelligent diagnostic device powered by Android 10. It offers exceptional, professional, and comprehensive diagnostic features, including DTC reading and clearing, real-time data reading, ECU coding, actuation tests, and specialized functions. It comes in two models: the TK689, which connects to the vehicle via a diagnostic cable, and the TK689BT, which uses a Bluetooth diagnostic connector for wireless connectivity.

Overview of the THINKSCAN 689BT PRO features and unboxing.

2. Setup

2.1 Package Contents

THINKCAR THINKSCAN 689BT PRO package contents including diagnostic tablet, VCI dongle, cables, and power adapters.

The package includes the THINKSCAN 689BT PRO diagnostic tablet, a wireless Bluetooth VCI dongle, various power adapters, and necessary cables.

2.2 Components & Controls

Refer to the diagram below for the location of components and controls:

Diagram showing components and controls of THINKSCAN 689 and THINKSCAN 689BT diagnostic tools.

Diagram illustrating the components and controls of the THINKSCAN 689 and TK689BT models.

  1. Touch Screen: 8-inch touch screen for user interaction.
  2. Charging Port: Type-C charging port for charging or data transmission.
  3. USB Expansion Slot: For connecting a USB expansion module.
  4. Diagnostic Cable Interface (TK689): Connect to the vehicle's OBD port for diagnostic functions.
  5. Diagnostic Connector (TK689BT): Bluetooth diagnostic connector for wireless connection to the vehicle's OBD port for diagnosis.
  6. Power/Screen Lock Button: Press and hold for 3 seconds to turn on or off; Press once to lock or unlock the screen.
  7. Loudspeaker: Provide audio indicators for connection status and important information.
  8. Adjustable Kickstand: Designed to support the device on a flat surface or attach it to a steering wheel.

2.3 Connecting to Vehicle

Plug the VCI into your vehicle's OBDII port / Data Link Connector (DLC). The DLC is usually 12 inches away from the center of the instrument panel (dash), under or around the driver's side. The image below shows the five most common DLC locations.

Diagram illustrating common OBDII/DLC port locations in a vehicle, marked A, B, C, D, E.

Common DLC port locations in a vehicle.

3. Operating Instructions

3.1 Core Diagnostic Functions

AutoSearch

The AutoSearch function can automatically read the car's VIN and identify its brand, model and year, and then lead you to the diagnosis functions directly.

Diagnose

This function allows you to manually select the vehicle's brand, model, year to start a diagnosis. Using this function requires you to have a full understanding of the vehicle information. If you do not know enough about the vehicle information, it is suggested to do the intelligent diagnosis.

OBD

Support OBD II and EOBD protocols after 1996. You can check the protocols supported by the vehicle.

3.2 Advanced Diagnostic Features

Topology Mapping

The THINKSCAN 689BT PRO is the first diagnostic device from THINKCAR with a topology map, making car repair more efficient by visualizing complex vehicle communication networks. It displays the overall vehicle network structure, quickly locates communication faults, and allows viewing real-time data streams.

Screenshot of the THINKSCAN 689BT PRO displaying a vehicle topology map with various ECU modules and their connections.

Visual representation of a vehicle's ECU network layout for faster fault finding.

AI Assistant

The newly upgraded AI Assistant in the Thinkscan 689BT PRO intelligently retrieves and analyzes fault codes, providing precise and customized solutions to simplify the repair process. The built-in AI chatbot offers real-time troubleshooting support, making diagnosis faster and smarter. This feature is ideal for both DIY enthusiasts and professionals, ensuring accurate and efficient diagnostic results.

Screenshot of the THINKSCAN 689BT PRO showing the AI Assistant interface with fault code analysis and suggested solutions.

The AI Assistant provides instant repair-question answers and deep analysis of diagnostic reports.

J2534 Protocol Support

The core objective of the J2534 protocol is to enable a universal hardware device to communicate and program the electronic control units (ECUs) of all car brands. The GVCI box included with this device meets this communication standard.

How to use J2534 Protocol:
  1. Ensure your GVCI box has the latest firmware version. If not, you need to upgrade.
  2. First, install the J2534 Plus driver on your PC. Running it will retrieve the version and other information.
  3. Install the corresponding original software for your car brand onto your PC. The software varies depending on the car model.
  4. Open the original software and locate our corresponding 【ThinkCar J2534 VCI】.
  5. Follow the menu instructions in the original software to identify your car model and access the diagnostic function menu. The flashing process requires downloading the program from the original manufacturer's server.
Notes for J2534 Protocol:
  • When connecting the GVCI box to the PC, some systems require checking the "Hardware Management" settings to see if the USB driver is recognized. Otherwise, the original software may not recognize our ThinkCar-J2534.
  • Please adjust the PC's time zone and time to the region you used when you applied for the service. Otherwise, some login errors may occur.
Image showing the J2534 Pass-Thru device connected to a laptop, illustrating its use for programming.

The J2534 Pass-Thru device connected to a laptop for programming.

FCA, CANFD & DOIP Support

The THINKSCAN 689BT PRO supports FCA SGW (Security Gateway) access for 2018+ FCA cars (Fiat/Chrysler/Alfa Romeo/Dodge/Jeep, etc.). It also supports CANFD and DOIP protocols for newer vehicle models.

Supported CANFD & DOIP Vehicles:
  • 2020 Chevrolet Tracker
  • 2020-2021 Chevrolet Onix 1.0L (L4F/L4G/LJ/LIF) / Onix 1.2L (LIF)
  • 2021 GMC YUKONNUKON XL, 2021 Chevrolet Tracker / Suburban / Tahoe, 2021 Cadillac Escalade / Escalade ESV
  • New cars from Land Rover/Jaguar Vehicles (about after 2020)
  • Compatible with E and F Chassis BMW
Image illustrating support for FCA SGW, CANFD, and DOIP protocols with examples of compatible car models.

Supported vehicle brands and protocols including FCA, CANFD, and DOIP.

OE Level Full System Diagnosis

The THINKSCAN 689BT PRO can access and scan all available systems and subsystems within a vehicle's ECUs, including Engine, Transmission, Airbags, ABS, TPMS, and many more. This allows for comprehensive fault code reading, clearing, and live data streaming.

Diagram showing various vehicle systems like ABS, SRS, ECM, TCM, EPS, BCM, AC, IC, TPMS, indicating full system diagnostic capability.

Full system diagnostic capabilities covering ABS, SRS, ECM, TCM, EPS, BCM, AC, IC, and TPMS.

35+ Reset Maintenance Services

The device offers over 35 frequently used maintenance and reset functions, including:

  • Oil Reset: Reset the oil life system and turn off the oil light after oil or oil filter replacements.
  • EPB: Reset the brake pad after replacing the brake pad, the servo motor, etc., deactivate/activate the brake control system, assist with brake fluid control, open and close brake pads, etc.
  • TPMS: Reset the tire pressure and turn off the tire pressure fault indicator.
  • BMS: Reset the monitoring unit of the car battery after replacing the battery or battery monitoring sensors.
  • DPF Regeneration: Clear particulate matter from the DPF filter through continuous combustion oxidation mode to stabilize the filter performance.
  • IMMO Keys: Disable lost vehicle keys and program replacement key fobs. (ONLY for some Asian and American cars with low-grade IMMO).
  • Injector Coding: Write the actual code of the fuel injection nozzle or rewrite the code in the ECU to the code corresponding to the fuel nozzle of each cylinder after replacing the ECU and the fuel injector, to accurately control or correct the fuel injection amount of each cylinder.
  • SAS Calibration: Calibrate the steering angle after replacing steering-related parts.
  • Suspension Level Calibration: Adjust the vehicle height sensor for level calibration when replacing the vehicle height sensor or control module in the air suspension system.
  • Throttle Adaption: Initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default state.
  • Sunroof Initialization: Initialize the sunroof data to set the sunroof to lock off, close in rain, memory function of sliding/tilting sunroof, outside temperature threshold, etc.
  • Seats Calibration: Specially designed for the seats with memory functions. Match the seat after repairing or replacing the seat.
  • ABS Bleeding: Help exhaust the air.
  • Gearbox Reset: Help complete the gearbox self-learning to improve gear shifting quality.
  • Gear Learning: Monitors certain camshaft position sensors signals.
  • Tire Reset: Set the size parameters of the modified or replaced tire.
  • A/F Reset: Set or learn Air/Fuel ratio parameters.
  • Adblue Reset (Diesel Engine Exhaust Gas Filter): Reset urea after the diesel exhaust treatment fluid is replaced or filled up.
  • Coolant Bleeding: Activate the electronic water pump.
  • Nox Sensor Reset: Reset catalytic converter learned value stored in ECU.
  • ODO Reset: Copy, write or rewrite the kilometer value. (Only few cars compatible, check with seller compatibility.)
  • SRS (Airbag Reset): Resets the airbag data to clear the airbag collision fault indicator.
  • Transport Mode: Deactivate the transport mode.
  • Windows Calibration: Perform door window matching to recover ECU initial memory.
  • Language Change: Change vehicle system language.
  • EGR Adaption: Learn the Exhaust Gas Recirculation valve after being cleaned.
  • Stop/Start Reset: Set up the automatic start-stop function in ECU.
  • AFS Headlamp Reset: Initialize the adaptive headlamp system.
  • Motor Angular Position Sensor Calibration.
  • Engine Power Balance.
  • High Voltage Battery Health Check.
  • Smart Cruise Control Calibration.
  • GPF Regeneration.
  • Automatic Air Conditioning Initialization.
  • ODO Check Reset.

Attention: Not all Reset Services work for all car models. Please contact the seller with your vehicle Make/Model/Year/VIN before purchase to ensure the desired functions are compatible with your car.

Image showing various maintenance reset icons like Oil Reset, ABS Bleeding, Airbag Reset, TPMS Reset, ODO Meter, Sus Reset, Sun Roof, Stop/Start Reset, Transport Mode, Tyre Reset, A/F Reset, SAS Reset, Windows Calibration.

Illustrations of various maintenance reset services available.

ECU Coding

The THINKSCAN 689BT PRO supports ECU Coding to match, learn, and code replaced ECUs, modify ECU settings, and reveal hidden features for a wide range of vehicles. This includes reprogramming adaptive data for components after repairs or replacements.

  • ECU Coding: Helps re-flash the vehicle control modules, allowing you to reprogram adaptive data for certain components after making repairs or replacements.
  • After replacing ECU modules, defective units, or certain parts, coding is needed to ensure the replaced parts are stored and recognized by the ECU. Follow strict manufacturer procedures to match, learn, code, and program until it functions normally. Warm Tips: Before coding, please read and record the original module’s information.
  • ECU coding enables multiple car systems to recognize each other, allowing actuators to start working.
  • ECU coding helps to flash some hidden features for vehicles and disable annoying functions (e.g., changing interior light, activating cornering headlights with fog lights, and deactivating buzzing sounds when locking the door).
Image depicting ECU coding capabilities, showing options to unfold hidden features, optimize vehicle performance, disable annoying functions, and customize OE settings.

ECU Coding functions to unfold hidden features, optimize performance, and customize settings.

Active Test / Bi-directional Control

The THINKSCAN 689BT PRO is a bi-directional scan tool that allows you to send commands to a module to perform specific tests and functions while observing real-time data. This feature, also known as Active Tests, is crucial for mechanics and workshops to save time and efficiently diagnose issues.

Image showing active test functions like modulating the throttle, turning on the radiator fan, opening/closing windows, operating mirrors, and turning on/off lights.

Active Test functions allow direct control over vehicle components for diagnostic purposes.

Report

The function allows you to record and save data, including diagnostic reports, data streams, and images for future reference and analysis.

Repair Info

The function enables you to access a comprehensive Repair Info database, which includes DTC code libraries, vehicle coverage lists, and detailed user manuals.

4. Maintenance

4.1 Maintenance Functions

The Maintenance menu includes commonly used maintenance and reset functions to assist with regular vehicle upkeep.

4.2 Software Update

Use the Update function to check for and download new software and applications to keep your device up-to-date with the latest vehicle models and diagnostic features.

5. Troubleshooting

5.1 Frequently Asked Questions (Q&A)

QuestionAnswer
Why does the software upgrade fail?Please check whether the device is stably connected to the internet.
Why is there no power with the VCI after connecting it to the vehicle's DLC port?Please check whether the VCI is securely connected and verify that the vehicle's ignition switch is turned ON.
Why can't I access the vehicle ECU system?Please check whether the vehicle is equipped with the system, whether the VCI is correctly connected, and whether the vehicle ignition switch is ON.
Why does the system stop while reading the data stream?This may be caused by loose connection. Please unplug the VCI and try again.
Why does the screen flash when the engine ignition starts?This is a normal occurrence caused by electromagnetic interference.

5.2 User Tips

Always ensure all connections (VCI to OBDII port, device to VCI if wired, and internet for updates) are secure and stable to prevent interruptions during diagnostic procedures.

6. Specifications

6.1 Technical Specifications

Main Device

  • Screen: 8 inches
  • Resolution: 1280*800 pixel
  • Working Environment: 0~50°C (32~122°F)
  • Storage Environment: -20~60°C (-4~140°F)
  • Model TK689: Working voltage: 9~18V, Working current: ≤1.2A
  • Model TK689BT: Working voltage: 5V, Working current: 2.5A

THINKSCAN VCI

  • Model TK689BT: Working Voltage: 9~18V, Working Current: ≤130mA
  • Working Environment: 0~50°C (32~122°F)
  • Storage Environment: -20~60°C (-4~140°F)

Supported Protocols

  • SAE J1850 PWM
  • SAE J1850 VPW
  • ISO 9141-2 ISO
  • ISO 14230-4 KWP
  • ISO 15765-4 CAN
  • CANFD

Certifications

  • Certifications: CE, FCC, RoHS, CCC
  • FCC ID: 2AUARTK689BT

7. Warranty & Support

7.1 Warranty Terms

  • The warranty is valid only for users who purchase products through authorized channels.
  • THINKCAR provides a one-year warranty from the date of product activation, covering defects in materials or workmanship. The warranty period may be subject to adjustment in accordance with local laws.
  • This warranty does not cover damage to the device or its components caused by misuse, unauthorized modifications, use for unintended purposes, or operation in a manner not specified in the manual.
  • Compensation for damage to the dashboard caused by defects in this device is limited to repair or replacement. THINKCAR will not be liable for any indirect or incidental damages.
  • THINKCAR reserves the right to determine the nature of any device damage based on its prescribed inspection methods. No agents, employees, or business representatives of THINKCAR are authorized to make any confirmations, notifications, or commitments regarding THINKCAR products without explicit authorization.

7.2 Customer Service & Remote Assistance

If you encounter an unresolved problem or diagnostic software bug during diagnosis, you can revert the most recent 20 test records to our service team. We will then analyze and troubleshoot it in a timely manner, to improve the quality of our products and user experience.

You can ask for remote assistance through third-party software. By sending your device ID number to the remote technician or after-sales personnel, you can authorize the other party to remotely operate your product to solve encountered problems.

For further assistance, you can contact THINKCAR TECH CO.,LTD. via:

Product tutorials, videos, Q&A, and coverage lists are available on the Thinkcar official website.

The user manual is also available in PDF format for download: User manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.