1. Introduction
Thank you for choosing the FIRECORE F94 EL 16 Lines Laser Level. This precision instrument is designed for various leveling and alignment tasks, offering high accuracy and multiple operating modes. Please read this manual thoroughly before use to ensure safe and efficient operation.
The F94 EL features an E-sensor motorized self-leveling system, shockproof design, pulse mode for extended range with a receiver, and a manual mode with dual-slope adjustment. Its robust construction with metal components and IP65 rating ensures durability in demanding work environments.
2. Safety Information
WARNING: LASER RADIATION
- Do not stare directly into the laser beam.
- Avoid direct eye exposure to the laser beam.
- Do not point the laser beam at people or animals.
- This is a Class 2 laser product (<1mW), but direct exposure can still cause eye injury.
- Keep the device out of reach of children.
- Use only as described in this manual.
3. Package Contents
Please check the package contents upon receipt to ensure all items are present and undamaged.

- FIRECORE F94 EL 4D Laser Level
- L-Magnetic Bracket
- Type-C Charger
- 7.4V 2600mAh Lithium Battery
- Laser Target Plate
- Remote Control
- Lifting Platform
- Hard Carrying Suitcase
- User Manual (this document)
4. Product Overview
The FIRECORE F94 EL features a robust design with intuitive controls. Familiarize yourself with the control panel and key components.

- Power Button (M/▲): Turns the device on/off. Long press to enter/exit Manual Mode.
- H Button (+): Activates/deactivates horizontal laser lines. Long press to adjust X-axis slope in Manual Mode.
- V Button (-): Activates/deactivates vertical laser lines. Long press to adjust Y-axis slope in Manual Mode.
- TILT Button: Activates/deactivates Shockproof Mode. Short press to adjust dual slope function in Manual Mode.
- RECEIVER Button: Activates/deactivates Pulse Mode for use with a laser receiver.
- Power Indicator: Shows battery status and operational mode.




5. Setup
5.1 Battery Installation and Charging
- Ensure the device is turned off before installing or removing the battery.
- Insert the 7.4V 2600mAh lithium battery into the battery compartment, ensuring correct polarity.
- To charge, connect the Type-C charger to the device and a power outlet. The power indicator will show charging status.
- The device can be operated directly via plug-in power even without the battery installed.

5.2 Mounting Options
The F94 EL offers versatile mounting options for various applications.
- L-Magnetic Bracket: Attach the laser level to metal surfaces using the magnetic bracket. The bracket allows for fine adjustments in height and rotation.
- Lifting Platform: Use the included lifting platform for precise height adjustments on flat surfaces.
- Tripod: The device has 1/4'' and 5/8'' mounting threads for compatibility with standard tripods.


6. Operating Modes
6.1 Electronic Self-leveling Mode
This mode automatically levels the instrument for accurate horizontal and vertical lines.
- Turn on the instrument using the Power Button. The leveling function is automatically activated.
- Wait for the indicator light to stop flashing, which signifies that the instrument has self-leveled to a horizontal position.
- The vertical and horizontal laser lines can be freely switched using the H and V buttons.
- If the tilt angle exceeds ±3.5°, the instrument cannot automatically level. The indicator light and laser lines will flash continuously as a warning.
- Ensure the device is placed on a relatively level surface for optimal self-leveling performance.

6.2 Shockproof Mode
This mode helps maintain accuracy by alerting the user to vibrations or shifts during operation.
- After turning on and allowing the device to self-level, press the "TILT" button.
- When the indicator light stops flashing, the device has entered Shockproof Mode.
- In this mode, if the instrument vibrates, tilts, or shifts, the laser lines and indicator light will flash continuously to alert you to potential errors.
- Press the "TILT" button again to exit this mode.
- Note: Receiver mode can be operated while in Shockproof Mode.
6.3 Pulse Mode (for use with FD30 Receiver)
Pulse mode extends the working range of the laser level up to 60 meters when used with a compatible FIRECORE FD30 receiver.
- First, ensure the laser level is turned on and leveled.
- Press the "RECEIVER" button on the laser level. The laser line will appear weaker, and the indicator light will illuminate, indicating Pulse Mode is active.
- Turn on your FD30 receiver and use it to detect the laser lines.
- Press the "RECEIVER" button again to exit Pulse Mode.

6.4 Manual Mode / Dual Slope Mode
Manual mode allows the laser level to be used at any angle, while Dual Slope Mode enables precise slope adjustments.
- After turning on and allowing the device to self-level, press and hold the "M" button for approximately 3 seconds to enter Manual Mode. The indicator light will flash continuously.
- In Manual Mode, the laser lines will not flash or sound an alarm, allowing for use at any desired angle.
- Press and hold the "M" button again to exit Manual Mode.
- Dual Slope Function: While in Manual Mode, short press the "TILT" button to activate the dual slope function for X and Y axes. This is useful for tasks like drainage or landscaping.
- If the indicator light is flashing quickly, long press "H" or "V" to adjust the angle of the Y-axis horizontal plane.
- If the indicator light is flashing slowly, long press "H" or "V" to adjust the angle of the X-axis horizontal plane.

6.5 Laser Line Selection (4D 16 Lines)
The F94 EL projects 16 laser lines, consisting of 2 horizontal and 2 vertical 360° planes.
- Use the 'H' button to toggle horizontal lines.
- Use the 'V' button to toggle vertical lines.
- The remote control can also be used to select specific line combinations (V1, V2, H, All lines on).

7. Maintenance
- Cleaning: Regularly clean the laser windows and the device body with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: When not in use, store the laser level in its hard carrying case in a dry, cool place, away from direct sunlight.
- Battery Care: Charge the battery fully before long-term storage. If storing for extended periods, recharge the battery every 3-6 months to maintain its lifespan.
- Calibration: The device undergoes multiple calibrations during manufacturing (Figure 7.1). If you suspect a calibration issue, contact customer support.

8. Troubleshooting
- Laser lines flashing continuously in Self-leveling Mode: The device is tilted beyond its ±3.5° self-leveling range. Reposition the device on a more level surface.
- Laser lines appear dim or not visible: Check if Pulse Mode is active (if not using a receiver). Ensure the battery is charged. For outdoor use or bright conditions, use a laser receiver.
- Device not turning on: Ensure the battery is properly installed and charged, or connect the device directly to power using the Type-C charger.
- Inaccurate readings: Ensure the device is properly leveled and not in Manual Mode if automatic leveling is required. Check for any obstructions to the laser beam.
- Remote control not working: Check the remote control battery. Ensure there are no obstructions between the remote and the laser level.
9. Specifications
| Parameter | Value |
|---|---|
| Model | F94 EL |
| IP Rating | IP65 |
| Laser Class | Class 2 (IEC/EN 60825-1:2014), <1mW |
| Laser Wavelength | 505-520nm |
| Horizontal/Vertical Accuracy | ±1.5mm/10m |
| Self-leveling Range | ±3.5° |
| Mount Size | 1/4'' & 5/8'' |
| Leveling Type | E-sensor Motorized |
| Working Time (all laser beams on) | About 5 hours |
| Working Range (Radius) | 30m (2-60m with FD30 receiver) |
| Power Supply | Rechargeable 7.4V 2600mAh Lithium Battery |
| Power Type | 220V-240V EU Plug (default) |
| Dimensions | 35.00 x 30.00 x 14.00 CM |
| Functional Modes | Electronic Self-leveling, Shockproof, Pulse, Manual, Dual-slope |
| Certification | CE, RoHS, WEEE |
10. User Tips
- Optimal Visibility: For best laser line visibility, work in dimly lit environments. For outdoor use or bright conditions, always use the Pulse Mode with a compatible laser receiver.
- Stable Surface: Always place the laser level on a stable, vibration-free surface or mount it securely to a tripod or bracket to ensure accurate readings, especially in self-leveling mode.
- Battery Life: To maximize battery life, turn off unnecessary laser lines and switch off the device when not in use.
- Environmental Factors: Extreme temperatures or strong winds can affect accuracy. Use Shockproof Mode in environments prone to vibration.
- Regular Checks: Periodically check the calibration of your laser level, especially if it has been dropped or subjected to harsh conditions.
11. Warranty & Support
For warranty information, technical support, or service inquiries, please contact the Firecore Tool Store directly. Keep your purchase receipt as proof of purchase.