Junsun Portable EV Charger (3.5KW, 7.4KW, 11KW, 22KW)

Contents

Junsun Portable EV Charger User Manual

Models: 3.5kW / 7.4kW / 11kW / 22kW (with LCD Display / Non-Wi-Fi Version)

1. Safety Precautions

WARNING

Please read all instructions carefully before using the product. Failure to follow the safety warnings and guidelines may result in electric shock, fire, serious injury, or damage to the vehicle.

  • Do not modify or repair: Never attempt to disassemble, repair, or modify the charger components by yourself. Contact qualified service personnel for assistance.
  • Inspect before use: Do not operate the charger if the enclosure, cable, or plug is cracked, frayed, broken, or shows any signs of damage.
  • Proper grounding: Ensure that the power outlet used is correctly grounded, properly installed, and complies with local electrical standards and regulations.
  • Operating environment: Do not submerge the smart control box in water. Avoid exposing the unit to severe weather conditions such as heavy downpours, blizzards, or direct lightning risks.
  • Keep away from children: This device is not a toy and must be kept strictly out of reach of children.

2. Product Specifications

This portable EV charger is designed to offer a convenient, safe, and plug-and-play charging experience. The system is comprised of three primary sections:

  • Grid-Side Power Plug: Schuko, CEE 3-pin, or CEE 5-pin depending on the maximum rated capacity.
  • Smart Control Box: Features a built-in heavy-duty LCD screen to monitor real-time metrics.
  • Vehicle Connector: Standard ergonomic Type 2 (IEC 62196-2) female charging gun.

LCD Display Features

The integrated display provides immediate, precise tracking of the current charging cycle, displaying:

  • Current Power (kW): The real-time electrical output being delivered to the vehicle.
  • Voltage (V) & Amperage (A): Active grid voltage and precise current draw monitoring.
  • Charged Energy (kWh): Accumulative energy (kilowatt-hours) delivered during the active session.
  • Temperature (°C): Continual thermal readout of the control box internal circuitry.
  • Status Indicators: Real-time process sequence tracking (Ready / Charging / Fault / Complete).

General Specifications

Specification3.5kW Model7.4kW Model11kW Model22kW Model
Input / Output Voltage230V AC (1-Phase)230V AC (1-Phase)400V AC (3-Phase)400V AC (3-Phase)
Maximum Current16A32A16A32A
Frequency50/60Hz50/60Hz50/60Hz50/60Hz
Charging InterfaceType 2 (IEC 62196-2)Type 2 (IEC 62196-2)Type 2 (IEC 62196-2)Type 2 (IEC 62196-2)
IP Protection RatingIP65IP65IP65IP65
Operating Temp. Range-30°C to +50°C-30°C to +50°C-30°C to +50°C-30°C to +50°C
Compliance MarksCE, RoHSCE, RoHSCE, RoHSCE, RoHS

Additional features include a touchscreen and WiFi wireless support for app control.

Junsun EV Charger with display, cable, and app interface
Junsun EV Charger with display, cable, and app interface, showing 3.5KW-7.4KW, 6-16A 230V, 6-32A 230V options.
Compatibility chart for Type 2 EVs and PHEVs
Compatibility chart for Type 2 EVs and PHEVs, showing various car brands and Type 2 / CCS2 connectors.

3. Operating Instructions

How to Start Charging

  1. Connect to Power Grid: Insert the power plug firmly into an appropriate wall receptacle or distribution socket. The LCD screen will initialize and display the "Ready" status.
  2. Adjust Amperage (If Applicable): For models equipped with current selection capability, press the adjustment toggle on the control box before inserting the gun into the vehicle to cycle through current limits (e.g., 8A / 10A / 13A / 16A / 32A).
  3. Connect to Vehicle: Open your Electric Vehicle's charging port and insert the Type 2 gun firmly until you hear a mechanical click, indicating a locked physical connection.
  4. Charging Initiation: The charger automatically negotiates communication handshakes with the vehicle's onboard charger (OBC). Once successful, the display state changes to "Charging".
Person using a smartphone to remotely control the EV charger via an app
Remote control via the dedicated app allows for smart charging management.
Diagram illustrating adjustable current settings and scheduled charging
Diagram illustrating adjustable current settings (16A, 13A, 10A, 8A, 6A) and scheduled charging for off-peak hours to save energy costs.

How to Stop Charging

  1. Terminate Session via Vehicle: Unlock the vehicle or stop charging through your car's central dashboard media screen/application.
  2. Disconnect Charging Gun: Safely remove the Type 2 connector from the car inlet port.
  3. Disconnect Power Source: Remove the power plug from the wall receptacle or grid outlet.
  4. Storage: Re-apply the protective rubber cap over the Type 2 interface and coil the cable naturally without tightly binding or twisting it. Store in a cool, dry area.

4. Maintenance

To ensure the longevity and safe operation of your Junsun Portable EV Charger, follow these maintenance guidelines:

  • Regular Inspection: Periodically inspect the charger, cable, and plugs for any signs of wear, damage, cracks, or fraying. Do not use the charger if any damage is observed.
  • Cleaning: Keep the charger and its components clean and free from dust and debris. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or submerge the unit in water.
  • Proper Storage: When not in use, re-apply the protective rubber cap over the Type 2 interface. Coil the cable naturally without tight binding or twisting. Store the charger in a cool, dry area, away from direct sunlight and extreme temperatures.
  • Environmental Protection: Avoid exposing the unit to severe weather conditions such as heavy downpours, blizzards, or direct lightning risks. The IP65 rating provides protection against dust and water jets, but prolonged exposure to harsh conditions should be avoided.

5. Troubleshooting Guide

The smart internal chip monitors for anomalies. If a protective trip occurs, the screen will indicate a specific code. Please check below for general resolutions:

  • Over / Under Voltage Protection: The source grid voltage fluctuates outside acceptable limits. Wait until grid conditions normalize or inspect the primary breakers.
  • Over Current Protection: The vehicle has drawn more current than configured. Unplug the system, perform a complete restart, and check vehicle configuration settings.
  • Over Temperature Protection: The internal control box temperature has crossed safe operating limits. Move the module away from direct solar radiation or hot areas and allow it to cool down naturally.
  • Leakage Protection: Active residual current detection safeguards. Immediately isolate the device and check for electrical integrity across the vehicle socket and power plug lines.
Visual list of multiple protection functions
The charger features multiple protection functions including Leakage, Short circuit, Overheating, Overvoltage, Overcurrent, Undervoltage, Lightning, and CP abnormality protection.
Image detailing 8 comprehensive protection features
Detailed view of the 8-fold comprehensive protection features for ultimate safety.

6. Environmental Protection & EU Compliance

This product fully complies with all legal directives and standards set forth by the European Union.

  • CE Marking: Confirms alignment with EU health, safety, and environmental protection protocols.
  • WEEE Directive: This unit must not be disposed of with ordinary household trash. Please recycle responsibly through an authorized local collection center for electronic waste.
Images showing the charger operating in various weather conditions
The charger is designed for all-weather reliability, operating effectively from -25°C to +55°C with an IP65 rating.

7. User Tips

  • App Control: The Junsun EV Charger utilizes its own dedicated mobile application for remote control, scheduling, and monitoring. While some users inquire about compatibility with third-party apps like 'Smart Life', the official app is recommended for full functionality.
  • Optimal Cable Length: Consider your typical parking setup when choosing cable length. A 5m cable is often optimal for daily use, providing flexibility without excessive coiling.
  • Off-Peak Charging: Utilize the scheduling feature via the app to charge during off-peak electricity hours to save on costs.

8. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the manufacturer directly. Refer to the product packaging or the official Junsun website for contact details.

A detailed user manual in PDF format is also available for download: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.