1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your HUANANZHI X99-F8D PLUS+TPM2.0 Motherboard. Designed for high-performance computing, this E-ATX motherboard supports dual Intel LGA2011-3 processors and DDR4 memory, making it suitable for demanding applications and server environments.
For optimal performance and longevity, please read this manual thoroughly before proceeding with installation and usage.
2. Product Overview
The HUANANZHI X99-F8D PLUS motherboard is engineered for robust performance and expandability. Key features include:
- 12-Layer PCB for enhanced stability and signal integrity.
- 8 x DDR4 memory slots supporting up to 512GB RAM.
- Dual 2.5G LAN for high-speed network connectivity.
- 8+8-phase power supply for stable and efficient power delivery.
- Multiple PCI Express 3.0 slots for graphics cards and expansion.
- Integrated Intel C612 series chipset for reliable operation.
- Dual-chip architecture for improved performance.
- Comprehensive I/O interface for various peripherals.
- Dual MOS cooling fans for effective heat dissipation.
- Multiple M.2 NVME and SATA 3.0 ports for diverse storage solutions.
- Onboard diagnostic card for easy troubleshooting.


3. Specifications
The following table outlines the technical specifications of the HUANANZHI X99-F8D PLUS Motherboard:

| Feature | Description |
|---|---|
| Model | X99-F8D PLUS |
| CPU Socket | Intel LGA2011-3 platform processor |
| Main Chipset | Intel C612 |
| Storage Interface | 6*SATA 3.0 6Gbps, 4*SSATA 3.0 6Gbps |
| Memory Slot | 8*DDR4 memory slot, Supports server memory, Four channels DDR4 2400/2133/1866MHz, Max 512GB |
| Expansion Slots | 3*PCI Express 3.0 X16, 3*PCI Express 3.0 X8 |
| Expansion Interface | 2*M.2 22110 NVME PCIE X4 3.0, 1*M.2 2280 NVME PCIE X4 2.0 (& NGFF SSATA 3.0Gb/s - An SSATA signal will be used) |
| Sound Track | 7.1 sound card |
| PCB Layers | 12-layer PCB |
| Power Supply | 8+8-phase power supply |
| Dimension | 305*330MM E-ATX |
| Rear Panel Interface | 4*USB2.0 Interface, 4*USB3.0 Interface, 2*Network card interface, 1*3-hole audio interface |
| Front Panel Interface | 2*USB2.0 PIN, 1*USB3.0 PIN, 1*Front audio pin, 1*COM PIN, 1*Power-on pin, 1*14PIN TPM, 1*Main board buzzer, 1*Diagnostic card, 1*Start/restart button |

4. Setup Guide
Follow these steps for proper installation of your motherboard and components:
- Prepare Your Case: Ensure your computer case is compatible with E-ATX motherboards. Install standoffs in the appropriate locations.
- Install CPUs: Carefully open the CPU socket levers. Align your Intel LGA2011-3 processors with the socket, ensuring the triangular marks match. Gently place the CPUs into the sockets and close the levers to secure them.
- Install CPU Coolers: Attach compatible CPU coolers to both processors. Ensure proper thermal paste application and secure mounting for effective cooling.
- Install RAM: Open the clips on the DDR4 memory slots. Align your DDR4 memory modules with the slots, ensuring the notch on the module matches the key in the slot. Press firmly until the clips snap into place. For optimal performance, install memory in a quad-channel configuration as per your CPU and memory kit specifications.
- Install M.2 NVME SSDs: Locate the M.2 NVME slots. Insert your M.2 SSD at an angle and then gently push it down, securing it with the provided screw.
- Install SATA Storage: Connect your SATA 3.0 storage devices (HDDs/SSDs) to the SATA ports using SATA data cables. Connect power from your PSU to these devices.
- Install Graphics Cards/Expansion Cards: Insert your PCI Express graphics cards or other expansion cards into the appropriate PCIe slots (PCIe 3.0 X16 or X8). Secure them with the case's retention mechanism.
- Connect Power Supply: Connect the main 24-pin ATX power connector and the 8-pin CPU power connectors (for both CPUs) from your power supply unit (PSU) to the motherboard.
- Connect Front Panel Cables: Connect the front panel headers (Power Button, Reset Button, HDD LED, Power LED, Front USB, Front Audio) to the corresponding pins on the motherboard. Refer to the motherboard's silkscreen labels for correct orientation.
- Connect Rear I/O: Connect peripherals such as USB devices, Ethernet cables, and audio devices to the rear I/O ports.

5. Operating Instructions
Once all components are installed and connected, you can power on your system.
- Initial Boot: Upon first boot, access the BIOS/UEFI settings (usually by pressing DEL or F2 during startup) to configure boot order, system time, and other settings.
- Operating System Installation: Install your preferred operating system from a bootable USB drive or optical media.
- Driver Installation: After OS installation, install all necessary drivers for the motherboard chipset, LAN, audio, and any discrete graphics cards. Drivers are typically available on the manufacturer's website.
- Diagnostic Card: The motherboard features an onboard diagnostic card (LED display) that shows POST codes during startup. These codes can help identify issues if the system fails to boot. Consult the motherboard's detailed manual (if available) for a list of POST codes and their meanings.
- Dual CPU Operation: This motherboard supports dual CPUs, enabling multi-core and multi-threading for enhanced performance in demanding tasks. Ensure both CPUs are properly installed and recognized by the operating system.
6. Maintenance
Regular maintenance helps ensure the longevity and stable operation of your motherboard:
- Dust Removal: Periodically clean dust from the motherboard, CPU coolers, and case fans using compressed air. Ensure the system is powered off and unplugged before cleaning.
- Thermal Paste: If replacing CPU coolers, reapply fresh thermal paste to the CPUs.
- Cable Management: Ensure cables are neatly routed to promote good airflow within the case.
- BIOS/UEFI Updates: Check the manufacturer's website for BIOS/UEFI updates. Updates can improve stability, compatibility, and performance. Follow the update instructions carefully to avoid damaging the motherboard.
7. Troubleshooting
If you encounter issues, consider the following troubleshooting steps:
- No Power: Check all power connections (24-pin ATX, 8-pin CPU). Ensure the PSU is switched on and the power button cable is correctly connected to the front panel header.
- No Display: Verify that the graphics card is properly seated in its PCIe slot and connected to the monitor. Check RAM modules are correctly installed.
- System Instability/Crashes: This could be due to overheating, faulty RAM, or an unstable power supply. Monitor temperatures, test RAM modules individually, and ensure your PSU meets the system's power requirements.
- Diagnostic Codes: If the onboard diagnostic card displays a code, refer to the motherboard's full manual for the specific meaning of the code to pinpoint the issue.
- Component Compatibility: Ensure all installed components (CPUs, RAM, GPU) are compatible with the HUANANZHI X99-F8D PLUS motherboard.
8. User Tips
No specific user tips were available from buyer reviews or Q&A for this product at this time. Always ensure proper grounding and anti-static precautions during installation.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty claims.