XINYI Sini Audio XY-AP3002

Contents

XINYI Sini Audio XY-AP3002 Pure Class D Amplifier Board

User Instruction Manual

1. Introduction

The XINYI Sini Audio XY-AP3002 is a high-performance Class D amplifier board designed around the TPA3255 chip from Texas Instruments. It offers a maximum output of 600W, making it suitable for a wide range of audio applications, from home HiFi systems to professional audio equipment. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your amplifier board.

XINYI Sini Audio XY-AP3002 Amplifier Board with key features

Figure 1: XY-AP3002 Amplifier Board Overview

2. Product Features

  • High Power Output: Equipped with the TPA3255 amplifier chip, delivering a maximum of 600W.
  • Wide Voltage Input: Operates on a DC 18-51V power supply.
  • Built-in Preamplifier: Features an adjustable gain preamplifier with a volume control knob.
  • Dual Operating Modes: Supports stereo (300Wx2) and bridge mono (600W) modes with one-button switching.
  • Comprehensive Protection: Includes reverse polarity, undervoltage, overvoltage, and overcurrent protection for stable and safe operation.
  • Smart MCU Control: Suppresses power-on/off POP noise.
  • Temperature-Controlled Fan: Ensures quiet and efficient heat dissipation.
  • Versatile Applications: Ideal for home HiFi audio systems, outdoor PA speakers, active speaker upgrades, and home theater setups.
TPA3255 Audio Power Core chip details

Figure 2: TPA3255 Audio Power Core

3. Specifications

AttributeValue
BrandXINYI Sini Audio
Model NumberXY-AP3002
Amplifier ChipTPA3255
TypeClass D Amplifier Board / Power Amplifier Module
Number of Channels2 (2.0)
Output Power (Stereo)300W x 2 @ 4Ω/50VDC
Output Power (Bridge Mono)600W @ 2Ω/50VDC
Maximum Power Per ChannelAbove 200W
Power SupplyDC 18-51V / ≥10A
Audio InputAUX 3.5mm, XH2.54-3P
Built-in PreampYes (Volume Control Knob Included)
Bridge Mode SwitchOne-Key Bridge Mode
CoolingTemperature-Controlled Fan
Protection FeaturesReverse Polarity, Under-Voltage, Over-Voltage, Over-Current, Pop-Free
MaterialPlastic, Metal
Dimensions (L x W x H)144mm x 71mm x 37mm
Product Weight290g
Package Weight345g
CertificationCE
OriginMainland China
Product dimensions 144x71x37mm and weight 290g

Figure 3: Product Dimensions and Weight

4. Package Contents

The standard package includes:

  • 1 x XY-AP3002 Amplifier Module
  • 1 x Screwdriver
XY-AP3002 Amplifier Module in its packaging

Figure 4: Amplifier Module in Box

5. Setup Instructions

5.1. Power Supply Connection

Connect a DC power supply (18-51V, minimum 10A recommended) to the power input port labeled 'DC18-51V'. Ensure correct polarity to avoid damage, although the board includes reverse polarity protection.

5.2. Audio Input

The amplifier board supports two audio input methods:

  • AUX (3.5mm Jack): Connect your audio source (e.g., smartphone, PC, media player) using a standard 3.5mm audio cable.
  • XH2.54-3P Connector: For custom wiring, use the XH2.54-3P input.

5.3. Speaker Connection

Connect your speakers to the designated terminals. The terminals are clearly marked for Left (L+, L-) and Right (R+, R-) channels. Ensure correct polarity for optimal sound quality.

Basic functions and cable connections diagram for XY-AP3002

Figure 5: Basic Connections Diagram

5.4. Bridge Mode (PBTL) Configuration

The XY-AP3002 can operate in PBTL (Parallel Bridge-Tied Load) mode to combine the output power into a single mono channel for higher power output (up to 600W). To enable PBTL mode:

  1. Locate the dip switch on the board.
  2. Set the dip switch to the ON position as indicated in Figure 6.
  3. Important: Restart the amplifier board after changing the dip switch setting for PBTL mode to take effect.

In PBTL mode, the default audio input is for the left channel, but it can also accept both left and right channels input simultaneously. Connect your mono speaker to the paralleled outputs (R+ and R- are paralleled, L+ and L- are paralleled).

PBTL mode wiring diagram and dip switch setting

Figure 6: PBTL Mode Setup and Wiring

5.5. Gain Adjustment

The amplifier has a built-in preamplifier with adjustable gain. The default gain is set by a 20K resistor (R=R/10K). For most applications, the default gain is sufficient. If you require specific gain adjustments, it is recommended to contact the manufacturer or seller for guidance.

Diagram showing gain adjustment resistor for left and right channels

Figure 7: Gain Adjustment Resistor Location

6. Operation

6.1. Power ON/OFF and Volume Control

The multi-function knob on the front of the amplifier board serves two purposes:

  • Power Switch: Rotate the knob counter-clockwise to the end until you hear a clear "click" sound to turn off the amplifier. Rotate clockwise to turn on.
  • Volume Adjustment: Once powered on, rotate the knob clockwise to increase volume and counter-clockwise to decrease volume. This utilizes an analog potentiometer for continuous signal and power output control.
Close-up of the multi-function volume knob for power and volume control

Figure 8: Multi-function Volume Knob

6.2. Smart Fan Control

The amplifier board features a temperature-controlled smart fan for efficient cooling. You can configure its operation using DIP switch No. 1:

  • DIP No. 1 ON: The fan starts working immediately after power on (manual mode).
  • DIP No. 1 OFF: The fan starts working automatically when the board's temperature exceeds 50°C (auto mode).
Smart MCU for POP noise suppression and Smart Fan control via DIP switch

Figure 9: Smart MCU and Fan Control DIP Switch

7. Maintenance

  • Cleaning: Keep the amplifier board clean and free from dust. Use a soft, dry cloth for cleaning. For stubborn dust, use compressed air.
  • Environment: Operate the board in a well-ventilated area to prevent overheating. Avoid exposure to moisture, extreme temperatures, and direct sunlight.
  • Connections: Periodically check all connections (power, audio, speakers) to ensure they are secure and free from corrosion.
  • Fan: Ensure the fan is not obstructed and operates freely. Clean any dust buildup on the fan blades.

8. Troubleshooting

8.1. No Sound Output

  • Check Power: Ensure the power supply is connected correctly and providing the required voltage (DC 18-51V) and current (≥10A).
  • Check Audio Input: Verify that the audio source is connected properly to either the AUX or XH2.54-3P input and is playing audio.
  • Check Speaker Connections: Ensure speakers are correctly wired to the output terminals with correct polarity.
  • Volume Level: Increase the volume using the knob.
  • Bridge Mode: If in PBTL mode, ensure the mono speaker is connected to the correct paralleled outputs.

8.2. Distorted Sound

  • Power Supply: Ensure the power supply is stable and provides sufficient current. An underpowered supply can lead to distortion at higher volumes.
  • Speaker Impedance: Verify that your speakers' impedance matches the amplifier's capabilities (e.g., 4Ω or 8Ω for stereo, 2Ω for mono).
  • Input Signal Level: Ensure the audio input signal is not too high, which can cause clipping.
  • Connections: Check for loose or faulty wiring.

8.3. Amplifier Overheating

  • Ventilation: Ensure adequate airflow around the amplifier board. Do not enclose it in a confined space without ventilation.
  • Fan Operation: Check if the cooling fan is spinning. If DIP switch No. 1 is OFF, the fan should activate above 50°C. If it's ON, the fan should run continuously.
  • Load: Ensure the speaker impedance is not too low, which can cause the amplifier to work harder and generate more heat.

8.4. Pop Noise During Power On/Off

The Smart MCU is designed to suppress POP noise. If you experience significant pop noise, ensure the power supply is stable and try cycling the power. If the issue persists, it might indicate a specific component issue or an unusual power supply characteristic.

9. User Tips

  • Power Supply Quality: Users have noted the amplifier delivers good power. To fully utilize its capabilities and ensure clean sound, invest in a high-quality, stable power supply that meets or exceeds the recommended specifications (DC 18-51V, ≥10A).
  • DIY Assembly: The product is often well-packaged and suitable for self-assembly into custom enclosures. Take care during assembly to ensure all connections are secure and proper insulation is maintained to prevent short circuits.

10. Warranty and Support

This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For warranty claims, technical support, or any questions not covered in this manual, please contact your point of purchase or the manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.