1. Introduction
Thank you for choosing the Chicnod LCD012 Smart Battery Charger. This 4-slot charger is designed for safe and efficient charging of 1.2V AA and AAA Ni-MH/Ni-Cd rechargeable batteries. Featuring an intelligent MCU control system, LCD display, and USB Type-C input, it provides a convenient and reliable charging solution for your household and portable electronic devices. Please read this manual carefully before use to ensure proper operation and safety.
2. Package Contents
Please check the package for the following items:
- 1 x Chicnod LCD012 4-Slot Battery Charger
- 1 x USB Type-C Cable
- 1 x User Manual
- (Batteries may be included depending on your purchase variant)
3. Product Features
- 4 Independent Charging Slots: Charges 1-4 AA or AAA Ni-MH/Ni-Cd rechargeable batteries simultaneously or individually.
- LCD Display: Real-time display of charging status for each battery.
- Smart MCU Control: Advanced micro-controller unit manages the charging process for optimal performance and safety.
- USB Type-C Input: Convenient and versatile power input, compatible with various USB power sources.
- Automatic Trickle Charging: Switches to trickle charge mode once batteries are full to maintain charge and prevent overcharging.
- Multiple Safety Protections: Built-in safeguards against overcharge, over-current, over-voltage, short circuit, over-temperature, and over-power.
- Automatic Identification: Detects non-rechargeable, short-circuited, or faulty batteries and will not charge them for safety.

Figure 1: Chicnod LCD012 Smart Battery Charger with AA and AAA batteries.

Figure 2: Close-up view of the 4-slot battery charging capability.

Figure 3: Internal view highlighting the MCU intelligent chip and its protective functions.
4. Setup Instructions
4.1 Charger Components
- Charger Cover: Protects the battery slots.
- AAA Battery Positive+ Pole: Indicated by a '+' symbol within each slot.
- Battery Storage and Charging Box: The main body containing the four charging slots.
- Type-C Port: Located at the rear or side for power input.
4.2 Connecting Power
- Connect one end of the provided USB Type-C cable to the Type-C port on the charger.
- Connect the other end of the USB Type-C cable to a compatible USB power source (e.g., a 5V/2A USB wall adapter, power bank, laptop USB port, or car charger).
- Upon connecting power, the LCD lights will briefly flash green and then turn off, indicating the charger is in standby mode.

Figure 4: Charger connected via Type-C for smart security fast charge.

Figure 5: Examples of Type-C charging input methods (mobile charger, USB power strip, car charger).
4.3 Inserting Batteries
- Ensure the charger is connected to a power source.
- Insert 1.2V AA or AAA Ni-MH/Ni-Cd rechargeable batteries into the charging slots.
- Carefully match the positive (+) and negative (-) poles of the battery with the corresponding markings in the charger slot. Incorrect insertion can prevent charging or damage the battery/charger.
5. Operating Instructions
5.1 Charging Process
Once batteries are correctly inserted, the charger will automatically detect them and begin the charging process. The LCD screen will display the charging status for each individual slot.

Figure 6: LCD display showing charging status for each slot.
5.2 LCD Indicator Status
The LCD display provides clear visual feedback on the battery status:
| Status | LCD Indication | Description |
|---|---|---|
| Charging | Red light always on | Battery is actively charging. |
| Fully Charged | Green light always on | Battery is fully charged and charger switches to trickle charge. |
| Over Temperature | Red light flashing fast | Battery or charger is too hot. Charging will pause. |
| Incompatible/Faulty Battery | Red light flashing fast | Battery is non-rechargeable, short-circuited, or damaged. Charging will not start. |
Important: DO NOT charge when the LCD light is quick flashing. This indicates a short circuit, a bad battery, or an incompatible battery type.
6. Maintenance and Safety Instructions
6.1 General Maintenance
- Keep the charger clean and dry. Use a soft, dry cloth to wipe any dust or debris.
- Avoid exposing the charger to extreme temperatures, direct sunlight, or high humidity.
- Do not disassemble or attempt to repair the charger yourself. This will void the warranty and may cause damage or injury.
6.2 Safety Precautions
- Operating Temperature: The charger must be used at an ambient operating temperature between 0°C and 35°C (32°F and 95°F).
- Battery Compatibility: This charger is ONLY for 1.2V AA/AAA Ni-MH/Ni-Cd rechargeable batteries. DO NOT charge 1.5V lithium batteries, alkaline batteries, carbon-zinc batteries, or any other non-rechargeable or incompatible battery types. Charging incorrect battery types may lead to battery leakage, explosion, fire, or personal injury.
- Battery Condition: DO NOT charge batteries with damaged covers or insulation, as this may cause short circuits and fire hazards.
- New Batteries: New rechargeable batteries typically reach their best performance after 3-5 full charge-discharge cycles.
- Storage: Battery power will gradually deplete during long-term storage. Fully charge batteries before reusing them after storage.
- Power Disconnection: Always disconnect the power supply from the charger once batteries are fully charged or when the charger is not in use.
- Normal Heat: It is normal for batteries to become warm during the charging process. They will cool down to normal temperature after charging.
- Children: Place this charger out of reach of children. Children should only use this charger under strict adult supervision.

Figure 7: Icons representing the charger's multiple safety protection features.
7. Troubleshooting
- Charger not turning on: Ensure the USB Type-C cable is securely connected to both the charger and the power source. Verify the power source is active.
- Battery not charging (LCD flashing red):
- Check if the battery is inserted with correct polarity (+/-).
- Confirm the battery is a 1.2V AA/AAA Ni-MH/Ni-Cd rechargeable type.
- The battery might be faulty or short-circuited. Try charging a different battery.
- Batteries getting excessively hot: While some warmth is normal, if batteries become extremely hot, immediately remove them from the charger and disconnect power. This could indicate a faulty battery or an issue with the charger.
- Slow charging: Ensure you are using a 5V/2A power adapter for optimal charging speed, especially when charging 4 batteries simultaneously. Lower amperage adapters (e.g., 5V/1A) may result in extended charging times.
8. Specifications
| Parameter | Value |
|---|---|
| Model Number | LCD012 |
| Compatible Battery Types | 1.2V AA/AAA Ni-MH/Ni-Cd Rechargeable Batteries |
| Charging Slots | 4 (Independent) |
| Input Voltage | 5V DC |
| Input Current | 2000mA (2A) |
| Output Voltage | 1.2V DC |
| AA Charging Current | 1000mA (for 1-4 batteries) |
| AAA Charging Current | 1000mA (for 1-4 batteries) |
| Charging Port | USB Type-C |
| Display | LCD Screen |
| Dimensions (L x W x H) | 8.4cm x 6.3cm x 2.6cm (3.3in x 2.5in x 1.02in) |
| Weight (without batteries) | Approx. 106g (0.23lb) |

Figure 8: Product information including dimensions and electrical specifications.
9. User Tips
- Optimal Adapter: For best charging performance and to ensure the charging effect of 4 batteries, it is recommended to use a 5V-2A USB power adapter.
- Battery Pairing: For devices that use multiple batteries, try to use batteries of the same type, capacity, and charge level for optimal performance and longevity.
- Regular Use: Rechargeable batteries perform best with regular use. If stored for long periods, they may require a few charge-discharge cycles to regain full capacity.
10. Warranty and Support
For warranty information, technical support, or any questions regarding your Chicnod LCD012 Smart Battery Charger, please refer to the seller's contact information or the official Chicnod website. Keep your purchase receipt as proof of purchase.