Introduction
Thank you for choosing the 60-in-1 Magnetic Ratchet Screwdriver Set. This comprehensive tool kit is designed for precision repairs and general maintenance tasks around the home, for electronics, PCs, bikes, and various DIY projects. Featuring an adjustable tri-wing ratchet handle, durable S2 steel bits, and a range of metric sockets, this set provides versatility and efficiency for all your repair needs.

Figure 1: Complete 60-in-1 Screwdriver Set Overview
Package Contents
Your 60-in-1 Magnetic Ratchet Screwdriver Set includes:
- 1 x Adjustable Tri-Wing Ratchet Handle
- 1 x Magnetic Bit Holder
- 52 x S2 Steel Screwdriver Bits (various types including Torx, Phillips, Slotted, Hex, Pozidriv, Tri-wing, Spanner, Square, Pentalobe, U-type)
- 9 x Metric Sockets (5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm)
- 1 x Compact Storage Case

Figure 2: All Included Bits and Sockets
Setup
- Unpack: Carefully remove all components from the compact storage case.
- Familiarize: Identify the main handle, the magnetic bit holder, the various screwdriver bits, and the metric sockets.
- Inspect: Check all components for any signs of damage. If any parts are damaged, do not use the set and contact support.
Operating Instructions
1. Attaching Bits and Sockets
- Select the appropriate screwdriver bit or metric socket for your task.
- Insert the chosen bit or socket firmly into the magnetic interface of the Tri-Wing Ratchet Handle. The strong magnetic connection will hold it securely in place.
2. Using the Adjustable Tri-Wing Ratchet Handle

Figure 3: Adjustable Tri-Wing Ratchet Handle Operation
- Magnetic Interface: Ensures a strong and secure connection for bits and sockets.
- Comfortable Grip: The knurled aluminum handle provides a secure, non-slip grip, reducing hand fatigue during prolonged use.
- Adjustable Design: The handle allows for easy switching between clockwise and counterclockwise rotation with a simple rotation of the central mechanism.
- Smooth Ratchet Action: The built-in ratchet mechanism delivers smooth operation, allowing for efficient screwdriving with less effort.
- Rotation:
- Counterclockwise: Rotate the handle to the left to loosen fasteners.
- Clockwise: Rotate the handle to the right to tighten fasteners.
3. General Usage
- Always select the correct size and type of bit or socket for the fastener to prevent damage to both the fastener and the tool.
- Apply steady, even pressure while rotating the handle to engage the fastener properly.
- For delicate electronics, apply minimal force to avoid stripping screws or damaging components.

Figure 4: Screwdriver Set in Use for Electronics Repair
Maintenance
- Cleaning: After each use, wipe down the handle, bits, and sockets with a clean, dry cloth to remove any dirt, grease, or debris.
- Storage: Always store all components neatly in the provided compact storage case. This protects the tools from damage, prevents loss, and keeps them organized for quick access.
- Avoid Moisture: Keep the tool set in a dry environment to prevent rust or corrosion, especially for the S2 steel bits.
- Inspection: Periodically inspect bits and sockets for wear or damage. Replace worn bits to ensure optimal performance and prevent damage to fasteners.

Figure 5: Compact Storage Case for Organized Storage
Troubleshooting
- Bit Slipping from Fastener:
- Ensure you are using the correct size and type of bit for the fastener.
- Apply firm, consistent downward pressure while turning.
- Inspect the bit for wear; a worn bit may not grip properly.
- Bit Not Staying in Handle:
- Ensure the bit is fully inserted into the magnetic holder.
- Check if any debris is obstructing the magnetic connection.
- Ratchet Mechanism Not Engaging:
- Verify that the rotation direction switch (if applicable on your model) is set correctly.
- Ensure the handle is clean and free of debris that might impede the mechanism.
- Difficulty Loosening/Tightening Screws:
- Ensure the ratchet direction is set correctly (clockwise for tightening, counterclockwise for loosening).
- For very tight screws, ensure you have a stable grip and apply appropriate leverage.
Specifications
| Feature | Detail |
|---|---|
| Product Name | 60-in-1 Magnetic Ratchet Screwdriver Set |
| Handle Type | Adjustable Tri-Wing Ratchet Handle |
| Bit Material | S2 Steel |
| Handle Material | High-strength Aluminum Alloy |
| Socket Sizes | 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm |
| Application | Household Tool Set, Electronics Repair, PC Repair, Bike Repair, DIY |
| Case Dimensions (L x W x H) | 181mm (7.13in) x 107mm (4.21in) x 36mm (1.42in) |
| Product Weight | 0.767 kg |

Figure 6: Product Dimensions
User Tips
No specific user tips were available from the provided data. For best results, always ensure the bit is fully seated and apply steady pressure.
Warranty & Support
For any questions, technical assistance, or warranty inquiries regarding your 60-in-1 Magnetic Ratchet Screwdriver Set, please contact the seller directly through your purchase platform. Please have your order details ready when contacting support.