Introduction
Thank you for purchasing the XOSS AirCube2 Mini Electric Bike Pump. This compact and portable air inflator is designed for efficient and precise tire inflation for various applications, including road bikes, mountain bikes, electric bikes, and sports balls. Please read this manual carefully before use to ensure proper operation and to maintain the longevity of your device. Keep this manual for future reference.
Figure 1: XOSS AirCube2 mini bike pump, highlighting its lightweight, low-frequency noise reduction, rapid inflation, and smart display features.
Package Contents
Upon unboxing, please verify that all items listed below are present and in good condition:
Figure 2: Contents of the XOSS AirCube2 package, including the pump, manual, various valve adapters, and charging cable.
- Mini Air Pump (XOSS AirCube2)
- User Manual
- Packaging Box
- Inflation Hose
- Ball Needle
- American Valve (Schrader) Adapter
- French Valve (Presta) Adapter
- Type-C Charging Cable
- Waterproof Bag
Setup
1. Charging the Device
Before first use, fully charge the AirCube2. Connect the provided Type-C charging cable to the pump and a suitable USB power source (e.g., wall adapter, power bank). The battery indicator light will flash during charging and turn solid green when fully charged.
Figure 3: The XOSS AirCube2 pump being charged via its Type-C port.
2. Power On/Off
- Power On: Press and hold the power button for 2 seconds. The display will light up.
- Power Off: Press and hold the power button for 2 seconds again. The display will turn off.
3. Battery Indicator
The battery level is indicated by the color of the indicator light:
- Green: Battery power above 70%.
- Orange: Battery power 10%-70%.
- Red: Battery power 1%-5%. Low battery, please charge immediately.
4. Air Hose Connection and Valve Adapters
Connect the inflation hose to the inflation port on the pump. Depending on your tire valve type, attach the appropriate adapter to the other end of the inflation hose:
- For Schrader valves, use the American Valve (Schrader) adapter.
- For Presta valves, use the French Valve (Presta) adapter.
- For sports balls, use the Ball Needle adapter.
Figure 4: The XOSS AirCube2 is adaptable for inflating road bikes, mountain bikes, electric bikes, and sports balls. Note: This product does not support TPU inner tubes with plastic valves.
Operating Instructions
1. Intelligent Display and Controls
The AirCube2 features a high-definition LED digital display for clear information and precise control.
Figure 5: Detailed view of the AirCube2's display and control buttons, including Power Display, Real-time Pressure, Preset Pressure, Unit Display (PSI/BAR), Power Switch, and Preset +/- buttons.
- Power Display: Shows remaining battery life.
- Real-time Pressure: Displays the current pressure of the connected item.
- Preset Pressure: Shows the target pressure you have set.
- Unit Display: Indicates the current pressure unit (PSI or BAR).
- Power Switch: Long press to turn on/off. Short press to start/stop inflation.
- Preset + / -: Adjust the target preset pressure.
2. Pressure Measurement
Once the bike pump is turned on and the valve is securely connected to the item to be measured, the display will show the actual current pressure.
3. Setting Preset Pressure and Inflation
The AirCube2 features smart preset and auto-stop precision. Use the '+' and '-' buttons to set your desired target pressure. A short press of the Power Switch button will initiate inflation. The pump will automatically stop once the preset pressure is reached.
Figure 6: The AirCube2's digital display allows easy preset of target pressure, with automatic shut-off upon reaching the set value.
4. Unit Switching (PSI/BAR)
When the bike pump is turned on, simultaneously press the Power button and the Start/Stop button to switch between PSI and BAR pressure units.
5. Inflation Performance
The AirCube2 offers rapid inflation. For example, it can inflate a 700*28C road tire from 0-80PSI in approximately 45 seconds.
Figure 7: The AirCube2's high-efficiency motor achieves 0-80 PSI inflation in just 45 seconds.
Typical inflation performance and recommended pressures:
Figure 8: Table detailing inflation type, tire pressure, time to full inflation, and number of inflations for different bicycle tires. Note: Inflation times are based on laboratory testing and may vary.
| Product Type | Recommended Pressure (PSI) |
|---|---|
| Children's Bike (16-inch) | 30-45 |
| Bicycle (20-inch) | 40-60 |
| Road Bike | 100-120 |
| Basketball | 7-9 |
| Football | 10-12 |
| Volleyball | 10-14 |
| Rugby | 10-14 |
Maintenance
- General Care: Keep the bike pump away from flammable and corrosive materials. Avoid dropping the device.
- Air Intake: The AirCube2 features a concealed air intake to prevent dust, sand, and other foreign objects from entering, which significantly extends the overall lifespan of the unit. Ensure this area remains clear.
- Battery Care: If the product has not been used for a long time (e.g., three months), please charge it to maintain battery health.
- Cleaning: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or immerse the device in water.
Figure 9: The concealed air intake design helps protect internal components from dust and debris, ensuring a longer product lifespan.
Troubleshooting
- High Temperature Safety Precaution: After prolonged use, the valve and metal components of the pump may become hot. It is recommended to allow them to cool for 1-2 minutes before touching to avoid burns. If the product becomes overheated, allow it to rest for 10 minutes before further use.
- Inaccurate Readings: The device is factory calibrated. However, due to manual lever variation, the display may show a slight deviation when idle. Manual calibration can improve measurement accuracy. Avoid performing calibration under high-temperature conditions.
- Pump Not Turning On: Ensure the battery is sufficiently charged. If the battery indicator is red, charge the device.
- Pump Not Inflating: Check that the inflation hose and valve adapter are securely connected to both the pump and the item being inflated. Ensure a target pressure is set.
Specifications
Figure 10: Key technical specifications of the XOSS AirCube2 pump.
| Feature | Detail |
|---|---|
| Product Model | AirCube 2 |
| Product Dimensions | 72.5 × 30.5 × 52.7 mm |
| Net Weight | ~143g |
| Inflation Pressure | 2 ~ 120 PSI |
| Operating Temperature | 00 ~ 45°C |
| Battery Power | 7.4V / 3.7WH |
| Input Parameters | 5V 1.5A |
| Type | Electric |
| Material | Alloy |
| Digital Display | Yes |
| Certification | CE |
Warranty and Support
The XOSS AirCube2 comes with a 1-year warranty from the date of purchase. For warranty claims or support, please contact your original dealer.
Conditions Not Covered by Warranty:
- Normal aging and loss of battery capacity.
- Damage or loss of products due to improper installation.
- Damage or abnormal use, such as exposure to high temperatures or water damage.
- Damage caused by dismantling the device by non-authorized personnel.
For a comprehensive user manual and additional information, you may refer to the official PDF document: XOSS AirCube2 User Manual (PDF).
Figure 11: A visual representation of the detailed instructions and diagrams found in the complete user manual PDF.
User Tips
- Always check the recommended tire pressure for your specific bicycle or sports equipment before inflation. This information is usually printed on the tire sidewall or in the equipment's manual.
- Ensure the valve connection is tight to prevent air leakage during inflation.
- For optimal battery life, avoid completely draining the battery frequently. Charge the pump regularly, especially if it hasn't been used for an extended period.
- Store the pump in its waterproof bag when not in use to protect it from moisture and dust.