1. Introduction
The GuliKit TMR Electromagnetic Joystick (Model NS51) is a high-quality replacement component designed to upgrade and repair various game controllers. Utilizing advanced Tunnel Magnetoresistance (TMR) technology, these joysticks offer enhanced durability, precision, and eliminate common issues like stick drift, providing a superior gaming experience. This manual provides detailed instructions for installation, calibration, and general use.
2. Compatibility
The GuliKit TMR Electromagnetic Joystick is compatible with a range of popular game controllers, including:
- PS4 DualShock Controller
- PS5 DualSense Controller
- PS5 DualSense Edge Controller
- Nintendo Switch Pro Controller
- Xbox Series Controllers


3. Key Features
- Direct Replacement: Designed for easy installation without requiring complex circuit modifications.
- No Stick Drift: Utilizes TMR (Tunnel Magnetoresistance) sensors for contactless and wear-free operation, effectively eliminating stick drift.
- High Durability & Long Life: The contactless design ensures extended lifespan compared to traditional potentiometers.
- Low Power Consumption: Features similar low power characteristics to carbon film joysticks.
- Unique Structural Design: Prevents interference from magnetic triggers on the joystick.
- Super Smooth Operation: Provides precise and fluid control.
- KK Ring Joystick Cap: Allows for easy stick cap replacement.





4. Package Contents
Each GuliKit TMR Electromagnetic Joystick package typically includes:
- 2 x GuliKit TMR Joysticks
- 2 x Joystick Caps




5. Installation Instructions
Important: This kit is intended for repair use on game controllers and requires technical skills, including soldering. Proceed with caution. It is recommended to watch the provided video demonstration before attempting installation.
General Steps (refer to video for visual guide):
- Disassembly: Carefully open your game controller to access the internal components, specifically the joystick modules. This usually involves removing screws and prying open the casing.
- Remove Original Joysticks: Unscrew and desolder the existing analog stick modules from the controller's circuit board.
- Install GuliKit TMR Joysticks: Place the new GuliKit TMR Joysticks into position and solder them securely onto the circuit board. Ensure all pins are correctly aligned and soldered.
- Wiring for Calibration (if applicable): For some controllers (e.g., PS5 DualSense Edge as shown in the video), an insulated wire may need to be soldered from the 1.8V line to a specific test point on the joystick PCB. This is crucial for enabling calibration.
- Reassembly: Carefully reassemble your controller, ensuring all components are properly seated and screws are tightened.




6. Calibration
After replacing the joysticks, it is essential to perform a calibration to ensure optimal performance and accuracy. Please ensure the controller cases and screws are installed before calibration and testing.
Calibration Methods by Controller Type:
- For Nintendo Switch Pro Controllers:
Navigate to the Switch console's Settings > Controllers and Sensors > Calibrate Joysticks. Follow the on-screen instructions to complete the calibration process. - For PS4 DualShock, PS5 DualSense, and PS5 DualSense Edge Controllers:
Use the third-party open-source calibration tool available at test.gulikit.com. Connect your controller to a PC and follow the tool's instructions to calibrate the joysticks. - For Xbox Series Controllers:
You can calibrate directly from the Xbox console or by downloading the "Xbox Accessories" software from the Microsoft Store on a PC. Find the "Recalibrate" option within the software/settings and follow the instructions.
7. Operating the Joysticks
Once installed and calibrated, the GuliKit TMR Electromagnetic Joysticks will function identically to your original controller's joysticks, but with the added benefits of enhanced precision and the elimination of stick drift. No special operating procedures are required beyond the standard use of your game controller.
8. Maintenance
The GuliKit TMR Electromagnetic Joysticks are designed for long-term, wear-free performance due to their contactless technology. Minimal maintenance is required:
- Cleaning: Periodically clean the exterior of your controller and joystick caps with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- Storage: Store your controller in a clean, dry environment away from extreme temperatures and direct sunlight.
9. Troubleshooting
Common Issues and Solutions:
- Stick Drift or Inaccurate Input:
This is typically resolved by performing a full calibration of the joysticks as described in Section 6. Ensure all steps are followed precisely for your specific controller model. - Joysticks Not Responding After Installation:
- Double-check all soldering points for proper connection. Cold joints or bridges can prevent functionality.
- Ensure the joysticks are correctly seated in their positions.
- Verify that any necessary calibration wiring (e.g., 1.8V line to test point) is correctly installed, if applicable for your controller.
- Difficulty with Calibration Tool:
Ensure your controller's firmware is up to date. Try a different USB port or cable. For PC-based tools, ensure all necessary drivers are installed.
10. Specifications
| Attribute | Value |
|---|---|
| Brand Name | GuliKit |
| Model Number | NS51 |
| Compatible Brand/Model | Sony (PS4, PS5, PS5 Edge), Nintendo (Switch Pro), Microsoft (Xbox Series) |
| Accessories Type | Accessory Kits |
| Control Method | Push button |
| Controls Type | Push button |
| Portable | Yes |
| Electric | No |
| Cable features | Without cable |
| Reusability | Reusable |
| Origin | Mainland China |
| Package Length | 18 cm |
| Package Width | 13 cm |
| Package Height | 8 cm |
| Package Weight | 0.042 kg |
11. User Tips
- Calibration is Key: Several users emphasize that proper calibration after installation is essential for optimal performance. Even small errors (1-3 bits) can affect in-game precision, so take your time with this step.
- Feel Difference: Some users note that the GuliKit TMR joysticks might feel slightly lighter or require less force to move compared to original analog sticks. This is a characteristic of the electromagnetic design and may require a short adjustment period.
- Eliminate Drift: The primary benefit highlighted by users is the complete elimination of stick drift, a common and frustrating issue with traditional joysticks.
12. Warranty and Support
For warranty information, technical support, or further assistance, please refer to the official GuliKit website or contact your retailer. Keep your proof of purchase for any warranty claims.