UTHAI HD01N Dual Bay Hard Drive Base User Manual

1. Product Overview

The UTHAI HD01N is a versatile dual-bay hard drive base designed for both 2.5-inch/3.5-inch SATA HDDs/SSDs and M.2 NVMe SSDs. It functions as an adapter box, M.2 reader, and an offline copying machine, facilitating storage expansion and data migration with high-speed transmission.

Key Features:

• Dual disk positions for 2.5"/3.5" SATA and M.2 NVMe drives.
• Offline cloning functionality (NVMe to SATA, SATA to NVMe).
• High-speed data transmission: SATA 6Gbps, NVMe 10Gbps, USB 5Gbps.
• Wide compatibility with Windows, macOS, Linux, and Android.
• Aluminum alloy casing for efficient heat dissipation.
• Intelligent sleep function to extend hard drive lifespan.
• Plug-and-Play, drive-free operation.

2. Package Contents

Please check the package for the following items:

• UTHAI HD01N Dual Bay Hard Drive Base
• 12V-2A Power Adapter
• USB Data Cable
• User Manual (this document)

3. Setup Instructions

3.1 Identifying Components and Ports

• Power Indicator Light: Indicates power status.
• Disk Position Light: Indicates drive activity.
• Copy Progress Lights (25%, 50%, 75%, 100%): Show cloning progress.
• ON/OFF Switch: Power switch for the device.
• DC 12V Input: Port for connecting the power adapter.
• PC Port: USB port for connecting to a computer.
• Copy Key: Button to initiate offline cloning.

3.2 Installing Hard Drives

The HD01N supports various hard drive types and sizes:

1. Ensure the device is powered off.
2. For 2.5-inch or 3.5-inch SATA drives, gently slide the drive into the larger SATA slot until it is firmly seated.
3. For M.2 NVMe SSDs, insert the SSD into the M.2 slot at an angle, then push down and secure it with the provided fastener (if applicable, typically a screw or plastic clip).
4. Ensure both drives are securely connected before proceeding.

3.3 Connecting Power and PC

1. Connect the 12V-2A power adapter to the DC 12V input port on the back of the HD01N.
2. Plug the power adapter into a wall outlet.
3. (Optional, for PC connection) Connect the USB data cable from the HD01N's PC port to an available USB port on your computer.
4. Flip the ON/OFF switch to the 'ON' position. The power indicator light should illuminate.

4. Operating Instructions

4.1 Data Transfer (PC Connected Mode)

When connected to a computer via USB, the HD01N acts as an external drive enclosure. It is Plug-and-Play and does not require additional drivers for most operating systems.

1. Ensure drives are installed and the device is powered on.
2. Connect the HD01N to your computer using the USB data cable.
3. Your operating system should automatically detect the connected drives.
4. You can now access, read, and write data to the drives as you would with any external storage device.
5. The disk position lights will flash during read/write operations.

Note: For new drives, you may need to initialize and format them through your operating system's disk management utility before use.

4.2 Offline Cloning (Stand-alone Copy Mode)

The HD01N supports offline cloning without needing a computer connection. This function allows you to copy data directly from one drive to another.

Important: Ensure the destination drive has equal or greater capacity than the source drive. All data on the destination drive will be overwritten during cloning.

1. Ensure the HD01N is disconnected from any computer.
2. Insert your Source Drive (the drive you want to copy from) into one slot and your Destination Drive (the drive you want to copy to) into the other slot. Refer to the device markings for correct slot identification (e.g., 'Source' and 'Target' or 'NVMe' and 'SATA' positions).
3. Power on the HD01N.
4. Press and hold the Copy Key for approximately 3-5 seconds until the 25% copy progress light starts flashing.
5. Release the Copy Key.
6. Press the Copy Key again briefly to confirm and start the cloning process.
7. The copy progress lights (25%, 50%, 75%, 100%) will illuminate sequentially as the cloning progresses.
8. Once the 100% light remains solid, the cloning process is complete.
9. Power off the device and safely remove the drives.

5. Maintenance

The HD01N features an aluminum alloy casing designed for 360° surround heat dissipation, ensuring optimal performance and longevity for your drives.

• Keep the device in a clean, dry environment, away from direct sunlight and extreme temperatures.
• Avoid obstructing the ventilation areas of the device.
• Clean the exterior with a soft, dry cloth. Do not use liquid cleaners.
• Ensure proper power supply (12V-2A) to prevent damage to the device and connected drives.

6. Troubleshooting

• Device not powering on: Ensure the 12V-2A power adapter is correctly connected to the device and a working power outlet. Check the ON/OFF switch.
• Drives not detected by PC: Verify the USB data cable is securely connected to both the HD01N and your computer. Try a different USB port or cable. Ensure the drives are properly seated in their slots. For new drives, check your operating system's disk management for initialization and formatting.
• Offline cloning not starting: Make sure the HD01N is disconnected from any computer. Confirm both source and destination drives are correctly inserted. Ensure the destination drive's capacity is equal to or greater than the source drive. Press and hold the Copy Key for 3-5 seconds until the 25% light flashes, then press it again briefly to confirm.
• Slow transfer speeds: Ensure you are using a USB 3.0/3.1 Gen 1 compatible port on your computer for optimal speeds (up to 5Gbps). The internal SATA (6Gbps) and NVMe (10Gbps) speeds are theoretical maximums for the drive interfaces themselves.

7. Specifications

8. Warranty and Support

The UTHAI HD01N Dual Bay Hard Drive Base comes with a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

8.1 Technical Support

For technical assistance or inquiries, please contact the seller. All emails are typically answered within 24 hours.

8.2 Additional Resources

An electronic version of the user manual (PDF) is available for download. Please refer to the product page or contact support for the link.

9. User Tips

• Smart Stay Feature: The device includes an automatic sleep mode that activates after 10 minutes of inactivity. This feature helps reduce wear and tear on your hard drives and extends their lifespan. The drives will wake up automatically upon reading or writing data.



• High Capacity Support: Leverage the device's ability to support up to 20TB for SATA drives and 8TB for NVMe drives for significant storage expansion.



• Optimal Performance: For the best data transfer speeds, ensure your computer's USB port supports USB 3.0/3.1 Gen 1 or higher.

10. Frequently Asked Questions (FAQ)

Q: Do I need to install drivers for this device?

A: No, the UTHAI HD01N is designed for Plug-and-Play operation and typically does not require any additional drivers for Windows, macOS, Linux, or Android operating systems.

Q: Can I clone a smaller drive to a larger drive?

A: Yes, you can clone a smaller source drive to a larger destination drive. However, the cloning process will only copy the data and partition structure of the source drive. The remaining space on the larger destination drive will be unallocated and may need to be extended or partitioned manually after cloning.

Q: What is the maximum capacity supported for each drive type?

A: The device supports SATA hard drives up to 20TB and M.2 NVMe hard drives up to 8TB. The total combined expansion capacity is 28TB.

Q: Is an external power supply required?

A: Yes, an independent 12V-2A power adapter is required and included to ensure stable power delivery, especially when using high-capacity drives or performing cloning operations.