Universal 36V/48V 17A Controller with M5 Display

Contents

Electric Scooter and Bicycle Controller with M5 Color LCD Display

User Manual

1. Introduction

This manual provides essential information for the installation, operation, and maintenance of your new Electric Scooter and Bicycle Controller with M5 Color LCD Display. This system is designed to provide efficient and reliable control for your electric scooter or bicycle, supporting both 36V and 48V systems with a 17A current limit for brushless motors.

Electric Scooter and Bicycle Controller with M5 Color LCD Display components

Figure 1: Overview of the Controller and M5 Display components.

2. Safety Information

  • Always ensure the power is OFF before connecting or disconnecting any components.
  • Professional installation is recommended for electrical components to prevent damage or injury.
  • Keep the controller and display away from water and extreme temperatures.
  • Verify voltage compatibility (36V or 48V) with your battery and motor before installation.

3. Package Contents

Upon opening the package, please verify that all items are present and undamaged:

  • 1x Brushless Motor Controller (36V/48V, 17A)
  • 1x M5 Color LCD Display
  • 1x Control Button Panel for M5 Display
  • Associated Wiring Harnesses
Controller on a scale showing its weight

Figure 2: The brushless motor controller, weighing approximately 194 grams.

4. Setup and Installation

The controller and display unit are designed for integration into electric scooters and bicycles. Due to the complexity of electrical systems, professional installation is highly recommended.

4.1 Controller Mounting

  1. Choose a secure and dry location on your vehicle for the controller. Ensure it is protected from physical impact and moisture.
  2. Mount the controller using appropriate fasteners (not included) to prevent vibration and movement.

4.2 M5 Display Installation

  1. Attach the M5 Color LCD Display to your handlebar using its integrated clamp. Ensure it is positioned for easy viewing and access to the control buttons.
  2. Secure the display firmly to prevent rotation during use.
Dimensions of the M5 Color LCD Display

Figure 3: M5 Display dimensions. Front view: 5.8cm (width) x 9.4cm (height). Side view: 0.8cm (thickness), total height with mount 12.7cm, mount depth 4.3cm, mount width 2.2cm.

4.3 Wiring Connections

The controller features a comprehensive wiring harness. Carefully identify each connector and connect it to the corresponding component on your electric scooter or bicycle. Refer to the images below for visual guidance on the wiring harness and connectors. If you are unsure, consult a qualified technician.

  • Motor Phase Wires: Typically thicker wires (e.g., Green, Yellow, Blue) connecting to the motor.
  • Hall Sensor Wires: Smaller wires (e.g., Red, Black, Green, Yellow, Blue) for motor position sensing.
  • Battery Power: Thicker Red (+) and Black (-) wires connecting to your battery.
  • M5 Display Connector: Connect the display cable to the designated port on the controller.
  • Brake Levers: Connect brake cut-off sensors if your system has them.
  • Throttle: Connect the throttle unit.
  • Pedal Assist Sensor (PAS): Connect the PAS sensor if applicable.
  • Other Accessories: Headlight, taillight, horn, etc., if supported by the controller.
Close-up of the controller's wiring harness with various colored connectors

Figure 4: Detailed view of the controller's multi-colored wiring harness.

Close-up of the M5 display's cable and connector

Figure 5: Specific connector for the M5 display cable.

Important: Ensure all connections are secure and correctly matched before applying power. Incorrect wiring can cause damage to the controller, motor, or battery.

5. Operating Instructions

Once installed and powered on, the M5 Color LCD Display provides an intuitive interface for controlling your electric vehicle.

5.1 M5 Display Functions

The M5 display clearly shows critical operational data:

  • Speed: Current riding speed.
  • Battery Level: Indication of remaining battery charge.
  • Assistance Level (PAS): If applicable, shows the current pedal assist level.
  • Odometer/Trip Distance: Total distance traveled or trip-specific distance.
  • Error Codes: Displays diagnostic codes in case of system malfunctions.
  • Headlight Indicator: Shows if the headlight is on (if connected and supported).
M5 Color LCD Display with control buttons

Figure 6: M5 Display interface with integrated control buttons.

5.2 Control Button Panel

The separate button panel (Figure 6) allows for easy interaction with the M5 display. Typical functions include:

  • Power On/Off: Long press to turn the system on or off.
  • Mode/Function Switch: Short press to cycle through display modes (e.g., Odometer, Trip).
  • Assist Level Adjustment: Use '+' and '-' buttons to increase or decrease pedal assist levels.
  • Headlight Control: Long press a specific button (often '+') to turn headlights on/off.

Specific button functions may vary slightly; refer to the display's on-screen prompts or experiment carefully.

6. Maintenance

  • Keep Clean: Regularly wipe the display and controller with a soft, damp cloth. Avoid abrasive cleaners.
  • Protect from Elements: Ensure the controller and display are protected from direct rain, snow, and prolonged sun exposure.
  • Inspect Connections: Periodically check all electrical connections for tightness and signs of corrosion or wear.
  • Avoid Impact: Protect the display and controller from physical shocks or drops.

7. Troubleshooting

ProblemPossible CauseSolution
System does not power on.Loose battery connection, dead battery, faulty power button.Check battery connection. Charge battery. Inspect power button wiring.
Motor not responding.Loose motor phase/Hall sensor wires, faulty throttle, motor issue.Verify all motor and throttle connections. Check for error codes on display.
Display shows error code.Specific system fault (e.g., motor, controller, sensor).Consult a general e-bike/scooter error code chart for common M5 display codes. Check relevant components.
Inconsistent speed/power.Loose connections, battery issues, motor sensor problems.Inspect all wiring. Ensure battery is fully charged and healthy.

If troubleshooting steps do not resolve the issue, it is recommended to seek assistance from a qualified electric vehicle technician.

8. Specifications

FeatureDetail
Product NameElectric Scooter and Bicycle Controller with M5 Color LCD Display
Voltage Compatibility36V / 48V (Dual Voltage)
Current Limiting17A
Motor TypeBrushless Motor
Motor Phase Angle60° / 120°
Controller MaterialAlloy
Display MaterialABS
Controller ColorSilver
M5 Display Dimensions (W x H)5.8 cm x 9.4 cm (2.28 in x 3.7 in)
M5 Display Thickness0.8 cm (0.31 in)
Approx. Package Weight0.38 kg (0.84 lbs)

9. User Tips

  • Cable Management: Use zip ties or cable wraps to neatly secure all wiring, preventing snags and damage.
  • Water Protection: While the components are generally robust, consider additional waterproofing for connectors if riding in wet conditions frequently.
  • Regular Checks: Before each ride, quickly check that the display powers on, shows correct battery level, and the throttle/PAS responds as expected.

10. Warranty and Support

For warranty claims, technical support, or replacement parts, please contact the seller or retailer from whom you purchased this product. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.