HUANANZHI X99-F8D PLUS

Contents

HUANANZHI X99-F8D PLUS Motherboard User Manual

Model: X99-F8D PLUS

1. Safety Precautions

This package contains components that may be damaged by electrostatic discharge (ESD). Please follow these steps below for a successful computer assembly:

  • Ensure all parts are firmly connected; otherwise, it might lead to the failure of recognizing components or starting the computer.
  • To prevent products from being damaged by ESD, discharge your body static by touching other metal objects before taking the motherboard out of the box.
  • Hold the border of the motherboard when taking it out. Do not touch the sensitive parts of the motherboard.
  • Place the motherboard in an anti-static container or on an anti-static pad if not needed.
  • Before turning on the computer, ensure all parts inside the case are firmly connected without any loose screws or metal components.
  • Do not start the computer before installation is finished, otherwise it might result in permanent damage to the computer parts or even injury to the user.
  • Prior to installation or disassembly, switch off the power and pull the power cable from the socket.
  • Keep the motherboard away from moisture.
  • Keep this user manual for future reference.
  • Before plugging in the power supply, ensure the socket provides the corresponding voltage.
  • Keep the power cable in a safe place, away from foot traffic and do not place items on it.

If you need any assistance during installation, please contact professional after-sales customer service.

2. Introduction and Features

The HUANANZHI X99-F8D PLUS motherboard is designed for high-performance computing, supporting dual Intel LGA2011-3 Xeon processors and extensive DDR4 memory. It features robust power delivery, advanced networking, and flexible expansion options for various usage scenarios including gaming, audio/video editing, and office work.

2.1 Key Features Overview

HUANANZHI X99-F8D PLUS Motherboard with key features highlighted
Figure 2.1: HUANANZHI X99-F8D PLUS Motherboard highlighting 12-layer PCB, 8x DDR4 slots, dual 2.5G NIC, 8+8-phase power supply, 3x PCIe 3.0x16 slots, Intel C612 chipset, Dual-Chip architecture, and I/O interface.
Detailed view of motherboard features including dual-chip, memory slots, and storage interfaces
Figure 2.2: Detailed features of the X99-F8D PLUS, showing dual-chip architecture for double performance, 3x PCIe 3.0x16 slots, 8x DDR4 memory slots (max 512GB), Intel C612 series native chips, I/O interface, 6x SATA3.0 + 4x SSATA3.0, and 12-layer PCB.

2.2 Product Video Overview

Video 2.1: A comprehensive overview of the HUANANZHI X99-F8D PLUS motherboard, showcasing its design and various components.

3. Specifications

Detailed specifications table for HUANANZHI X99-F8D PLUS motherboard
Figure 3.1: Detailed specifications table for the X99-F8D PLUS motherboard.
Table 3.1: HUANANZHI X99-F8D PLUS Motherboard Specifications
FeatureDescription
ModelX99-F8D PLUS
Main ChipsetIntel C612
CPU SocketLGA 2011-3, Supports Intel Xeon E Series Processors
Storage Interface6x SATA 3.0 6Gbps, 4x SSATA 3.0 6Gbps, 2x M.2 22110 NVME PCIe X4 3.0, 1x M.2 2280 NVME PCIe X4 2.0 & NGFF SSATA 3.0
Memory Slots8x DDR4 memory slots, Supports server memory, Four channels DDR4 2400/2133/1866MHz, Max support 512GB
Expansion Slots3x PCI Express 3.0 X16, 3x PCI Express 3.0 X8
Sound Track7.1 sound card (Realtek ALC897)
PCB Layers12-layer PCB
Power Supply8+8-phase power supply
Dimension305x330mm E-ATX
Rear Panel Interface4x USB2.0, 4x USB3.0, 2x Network card interface (RTL8125BG 2.5Gbps), 1x 3-hole audio interface
Front Panel Interface2x USB2.0 pin, 1x USB3.0 pin, 1x Front audio pin, 1x COM pin, 1x Power-on pin, 1x 14PIN TPM, 1x Main board buzzer, 1x Diagnostic card, 1x Start/restart button
RAID SupportedYes
Usage ScenarioGaming, Audio & Video, Office
Motherboard dimensions and rear I/O port layout
Figure 3.2: Motherboard dimensions (305mm x 330mm) and detailed rear I/O interface layout.

4. Installation and Setup

Please refer to the following diagrams and instructions for proper installation. All pins marked with '1' or a white bold line indicate pin 1 position.

4.1 Motherboard Layout

Motherboard diagram with component labels
Figure 4.1: X99-F8D PLUS V1.2 Motherboard Illustration, showing CPU sockets, DDR4 slots, PCIe slots, M.2 NVME slots, SATA ports, and various headers.

4.2 Rear I/O Panel

Rear I/O panel diagram with port labels
Figure 4.2: Overall Rear I/O Panel Display, detailing USB 3.0, USB 2.0, LAN, and Audio ports.

LAN Port Status Table

StatusDescription
Turn OffNetwork Not Connected
YellowNetwork Connected
FlickerNetwork In Use
GreenTransmission rate 100 Mbps
OrangeTransmission rate 1 Gbps

Audio Port Configuration

Audio Port2468
Audio Input
Audio output/Front speaker output●●●●
Rear speaker output
Center/subwoofer output
Microphone input
Side speaker output

4.3 Internal Connectors and Headers

Clear CMOS Jumper

To clear CMOS settings, locate the CLR-CMOS jumper on the motherboard. Refer to the motherboard diagram for its exact location. Shorting this jumper will reset BIOS settings to default.

Front Audio Output Ports

Connect your chassis's front audio panel to the Front Audio Output header. Ensure correct pin alignment (Pin 1 is usually marked).

USB Extension Interface

Connect your chassis's front USB ports to the USB Extension headers. The motherboard supports both USB 2.0 and USB 3.0 headers.

USB3.0 Interface

Connect your chassis's front USB 3.0 ports to the dedicated USB 3.0 header.

PCI Expansion Slot

The motherboard features multiple PCI-E slots for expansion cards. Refer to the diagram for slot types (PCI-Ex16, PCI-Ex8).

F_PANEL1 Boot Interface

Connect your chassis's front panel connectors (Power LED, HDD LED, Power Switch, Reset Switch) to the F_PANEL1 header. Pay close attention to the polarity and pin assignments.

4.4 Component Installation

CPU Installation

  1. To correctly place the CPU in the motherboard, align the two pairs of starting points and the golden triangle on the LGA2011-3 CPU with the socket. The golden triangle indicates Pin 1.
  2. Open the CPU socket retention mechanism.
  3. Carefully place the CPU into the socket, ensuring it sits flush.
  4. Close the retention mechanism to secure the CPU.

M.2 Interface Installation

  1. Remove the screw from the screw base.
  2. Remove the screw base.
  3. Tighten the screw base into the M.2 interface distance hole corresponding to your M.2 module's length.
  4. Insert your M.2 module into the M.2 interface at a 30-degree angle.
  5. Place the screw on the trailing edge notch of your M.2 module and tighten it to the screw base.

Memory Installation

  1. Pull the clips on both ends of the memory slot outward.
  2. Align the memory module with the slot's key notch.
  3. Press the memory module firmly into the slot until the clips automatically snap into place.

Graphics Card Installation

  1. Remove the chassis's expansion slot cover.
  2. Open the PCIe slot retention clip.
  3. Insert the graphics card into the PCIe slot, ensuring it is fully seated.
  4. The retention clip will automatically return to its position.
  5. Secure the graphics card to the chassis with screws.
  6. Connect the necessary power cables to the graphics card.

5. Operating Instructions

Once the hardware is installed, the next steps involve installing necessary drivers and configuring the BIOS.

5.1 Driver Installation

It is crucial to install the correct drivers for optimal performance and functionality. Drivers are typically provided on a CD/DVD or can be downloaded from the manufacturer's website.

Driver Categories:

  • Chipset Driver: For Intel C612 chipset.
  • Audio Driver: Realtek series sound card driver.
  • LAN Driver: Realtek network card driver (2.5Gbps).

Installation Steps (General):

  1. Insert the driver CD/DVD or navigate to the downloaded driver folder.
  2. Run the appropriate setup executable (e.g., Setup.exe or driver installer).
  3. Follow the on-screen prompts, clicking "Next" and "Yes" as required.
  4. The system may restart automatically to complete the installation.

Manual Driver Update (via Device Manager):

  1. Go to "Control Panel" > "System" > "Hardware" > "Device Manager".
  2. Right-click on the hardware device that needs a driver update.
  3. Select "Update driver" > "Browse my computer for driver software".
  4. Navigate to the driver folder and click "Next".

Audio Driver Uninstallation (Example for HD Audio series):

  1. From the Windows desktop, go to "Settings" / "Control Panel".
  2. Select "Add/Remove Programs".
  3. Locate "Realtek High Definition Audio Driver" in the list and click "Add/Remove" to uninstall.

5.2 BIOS Settings

The BIOS (Basic Input/Output System) stores critical system data in CMOS SRAM. This data is maintained by a battery when the system is off. To enter the BIOS setup utility:

  1. Turn on your computer.
  2. During the Power-On Self Test (POST), press the Delete or Del key to enter the AMI BIOS CMOS SETUP main page.
  3. Alternatively, for a warm boot, press F11 or F10 to save and exit.

Main Menu Functions:

  • Main: System Overview (Date/Time, HDD specs, Monitor type).
  • Advanced: Advanced Settings (Virus alert, Booting disk priority, etc.).
  • Chipset: Advanced Chipset Settings.
  • Boot: Boot Settings.
  • Security: Security Settings (BIOS password).
  • Save: Save Setting (Save settings).
  • Exit: Exit Options (Load optimized defaults, Load fail-safe defaults, Discard changes, Exit without saving).

6. Maintenance

  • Regularly clean dust from inside your computer case using compressed air to prevent overheating and component damage.
  • Ensure all cables and components are securely connected. Loose connections can cause system instability.
  • Keep the system in a well-ventilated area to maintain optimal operating temperatures.
  • Avoid exposing the motherboard to extreme temperatures or humidity.

7. Troubleshooting

If you encounter issues, consider the following:

  • No Power/No Display: Check all power connections (24-pin ATX, 8-pin CPU). Ensure RAM modules are properly seated. Verify the graphics card is correctly installed and powered.
  • Diagnostic Card: The motherboard includes a diagnostic card (usually a two-digit LED display) that shows POST codes. Refer to the motherboard manual or manufacturer's website for a list of these codes to identify the problem.
  • System Instability/Crashes: This could be due to overheating (check cooling), faulty RAM (test modules individually), or driver issues (ensure all drivers are up-to-date).
  • CPU Not Detected: Ensure the CPU is correctly seated in the socket and the retention mechanism is locked.
  • Graphics Card Issues: If you have multiple PCIe slots, try installing the graphics card in a different slot. Ensure it's in a slot dedicated to CPU1 for initial setup, as noted by some users.
  • BIOS Reset: If system behavior is erratic after changes, clear the CMOS settings using the jumper or by removing the CMOS battery for a few minutes.

8. User Tips

  • Initial Graphics Card Setup: For initial setup, it may be necessary to plug the graphics card into the black PCIe slots (dedicated to CPU1), rather than the orange slots which might be closer to CPU2. This can help with display initialization.
  • Diagnostic Numeric Indicator: The onboard numeric indicator is very useful for diagnosing issues during the initial setup and boot process. Pay attention to the codes displayed.
  • Xeon Compatibility: This motherboard is an excellent choice for recycling Xeon processors, offering good performance for the price.
  • Linux Compatibility: Users have reported successful operation with Linux distributions like Linux Mint, including proper resolution after installing NVIDIA drivers.

9. Warranty and Support

For warranty information, technical support, or assistance with any installation steps, please refer to the warranty card included with your product or contact HUANANZHI's official customer service. You can also reach them via E-mail at business@huananzhi.com.

A detailed user manual in PDF format is available for download: Download User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.