iScooter W9Air Electric Scooter User Manual

Important Safety Information

Please read this user manual carefully before operating the iScooter W9Air Electric Scooter. Keep this manual for future reference.

Disclaimer: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.

Illustrations of product, accessories, and user interface in this manual are for reference purposes only. Actual product and functions may vary due to product enhancements.

Product Overview

The iScooter W9Air is an electric scooter designed for adults, featuring 10-inch off-road tires, a 48V 10Ah battery, and a powerful 1000W max motor. It supports the Voltix APP for smart control and tracking.

iScooter W9Air Electric Scooter - main product view.

Product Components Diagram

Detailed diagram of the iScooter W9Air Electric Scooter with labeled parts.

1. Control Pad
2. Handlebar Folding Sleeves
3. Display
4. Brake Levers
5. Throttle
6. Height Adjustment Clamp
7. Headlight with Horn
8. Disc Brake Rotor
9. Charging Port
10. Deck Lights (2 Sides)
11. Folding Mechanism
12. Footrest
13. 2-in-1 Taillight & Brake Light

Package Contents

Ensure all items are present and in good condition upon unpacking.

Illustration of the items included in the package.

• iScooter W9Air Electric Scooter (folded)
• Charger (54.6V 1.5A with EU plug)
• Open-End Wrench *1
• T-Shaped Key *1
• L-Shaped Hex Key *1
• User Manual (PDF available online)

A detailed user manual in PDF format is available for download. Please refer to the official product page or contact support for the link: User Manual PDF.

Setup Instructions

1. Unfolding the Scooter

Follow these steps to safely unfold your scooter:

Diagram illustrating the unfolding process of the scooter.

1. First, press down the folding latch (1) and lift the stem to the riding position until you hear a click.
2. Then, pull the safety pin (2), close the S-shaped lever (3) to the end, and release the safety pin until it locks the S-shaped lever in place (4).

Note: If you find it hard to press the folding latch, lift the stem a little to ease the mechanism.

2. Adjusting the Handlebar Height

Adjust the handlebar to a comfortable height for your riding posture.

Diagram showing how to adjust the handlebar height and lock the folding sleeves.

1. Lift the two ends of the handlebar to the horizontal positions until you hear clicks from the folding sleeves, indicating they are locked in place.
2. Adjust the handlebar to your desired height using the height adjustment clamp.
3. Fully tighten the height adjustment clamp to secure the handlebar.

Warning: The folding sleeves must be in their locking positions (no gaps between them and the handlebar). If not, lift the ends a little and re-engage.

Operating Instructions

1. Folding the Scooter

To fold the scooter for transport or storage:

Diagram illustrating the folding process of the scooter.

1. First, power off the scooter.
2. Then, pull the safety pin, open the S-shaped lever, press down the folding latch, and fold down the stem.
3. The stem can then be used as a carrying handle.

Note: If you find it hard to slide the folding sleeves in the directions on them, lift the ends of the handlebar up a little.

2. Display Overview

The extra-large high-definition touchscreen display shows key cycling data.

Illustration of the scooter's display screen with indicators.

• Left turn signal
• Real-time speed
• Headlights on
• Brakes applied
• Vehicle locked
• Right turn signal
• Engine overheat warning
• Connected app
• Driving mode (SPORT, RACE, ECO)
• Trip mileage / Total mileage (TRIP/ODO)
• Cruise control
• Battery level

3. Basic Controls

• Power ON/OFF: Press and hold the Power button (M button) for 2 seconds.
• Headlight ON/OFF: Press the Headlight button (S button) to turn on/off the headlight, taillight, and deck lights simultaneously.
• Select Riding Mode: Press the "S" button to cycle through modes (ECO, RACE, SPORT).
• Select TRIP/ODO: Press the "S" button twice.
• Imperial/Metric Units: Press the "M" button.

Note: The scooter will automatically power off after 10 minutes of inactivity.

4. Speed Modes

The scooter offers different speed modes to adapt to various situations. After starting, hold the brake lever down and press the power button 5 times to deactivate the speed limiter. Press the S button to change gears.

Visual representation of the different driving modes and their speeds.

After starting, hold the brake lever down and press the power button 5 times to deactivate the speed limiter. Press the S button to change gears.

5. Smart Connection with Voltix App

The iScooter W9Air supports the Voltix APP for enhanced control and data tracking. Scan the QR code below to download the app.

Scan to download the Voltix App for real-time data tracking and smart anti-theft features.

With the Voltix APP, you can monitor your ride, adjust settings, track performance, and utilize smart anti-theft features.

Charging the Scooter

To charge the iScooter W9Air:

• The scooter is fully charged when the charger indicator changes from red to green.
• With charging protection, the scooter will cut off charging automatically after a full charge. However, it is not recommended to overcharge.
• Keep the charging port cover closed when not charging to protect it from dust and moisture.
• The scooter cannot be turned on during charging.
• Charging Time: 6-8 hours.

Brake Adjustment

The iScooter W9Air is equipped with front and rear disc brakes, along with an electronic brake, for precise control and a comfortable experience.

Illustration showing the front wheel disc brake, rear disc brake, and electronic brake lever.

Adjusting the Brake Cable

You will need a hex wrench to loosen the bolt on the cable clamp.

• If the disc brake is dragging: Slide the arm of the clamp backward along the cable while holding the cable in one hand. Then, retighten the bolt on the brake clamp.
• If the disc brake does not work efficiently (cable is slack): Slide the arm of the clamp forward along the cable while holding the cable in one hand. Then, retighten the bolt on the brake cable clamp.

Eliminating Brake Noise

1. Loosen the two brake caliper mounting bolts (not the bolt on the cable clamp).
2. Reposition the brake caliper to ensure the brake rotor is centered between the brake pads.
3. Retighten the mounting bolts.

Settings Menu

The scooter has a settings menu accessible via the control pad. There are 3 setting items:

• P1: Start Mode (P10 for zero start, P11 for non-zero start)
• P2: Cruise Control (P20 for off, P21 for on)
• P4: Odometer Resetting

To enter settings: Press and hold the Power (M) and Horn (S) buttons simultaneously.

To navigate: Press the Horn (S) button to cycle through P1, P2, and P4.

• When selecting P1 or P2, press the "M" button to select P10 or P20; press the "S" button to select P11 or P21.
• When selecting P4, press and hold the "M" button to reset the odometer (total distance).

To save changes: Press the Horn (S) button to switch to the next setting item (changed items will be saved). To exit and save all changes, press the Power (M) and Horn (S) buttons simultaneously, or wait 5 seconds for automatic saving and return to the home screen.

Troubleshooting: Error Codes

If an error code appears on the display, refer to the table below. If the issue persists, contact customer support.

Specifications

Key technical specifications for the iScooter W9Air Electric Scooter:

*Range and maximum load capacity are measured under ideal laboratory conditions. Actual performance may vary based on factors such as rider weight, terrain, wind, and riding habits.

User Tips

• For optimal battery life, avoid completely draining the battery and do not overcharge.
• Regularly check tire pressure and brake function for safe and efficient riding.
• Utilize the Voltix APP to track your rides and optimize settings for a personalized experience.
• When folding the scooter, ensure all locking mechanisms click into place to prevent accidental unfolding.
• Always wear appropriate safety gear, including a helmet, when riding.

Warranty and Support

This product is CE certified, ensuring compliance with European security standards.

For detailed warranty information, support, or to obtain the full text of the EU Declaration of Conformity, please contact the manufacturer or seller directly.

Manufacturer: Dongguan Yicheng Shengda Information Technology Co., Ltd.

Email: support@e-scootworld.com

EU Representative (GAVIMOSA CONSULTORIA, SOCIEDAD LIMITADA):

Email: compliance.gavimosa@outlook.com

Phone: +34 688185858

For further assistance, please refer to the comprehensive user manual PDF. If you have any questions or encounter issues not covered in this manual, please contact our support team.