DOOGEE Anyscene S3 Kids Smart Watch User Manual

Product Introduction

The DOOGEE Anyscene S3 is a 4G Kids Smart Watch designed to keep children connected and safe. It features GPS, WiFi, and LBS for real-time location tracking, dual cameras for video calls, and a durable IP68 waterproof design. This manual provides essential information for setting up, operating, and maintaining your smartwatch.

Setup

Initial Setup

When using the watch for the first time, we recommend completing the following steps to set up the product and understand its basic functions:

1. Charge the Watch: Activate the watch by charging it. Connect the charging cable to a standard 5V/1A charger. Ensure the watch's charging contacts are fully aligned with the charger's metal contacts. A full charge takes 2 hours or more.
2. Power On: Press and hold the top right button to turn on the watch.
3. Pair with Smartphone: Once the watch is on, you can pair the device with your smartphone to receive notifications, sync activity data, and more.
4. Check Battery: Make sure your device has sufficient battery.
5. Software Updates: Check for software updates. To enjoy the best user experience, keep your watch software updated to the latest version. Software updates will optimize its functionality.
6. Start Activity: Begin using the watch's features.

Mobile Phone Connectivity (Doogee Fit App)

By linking your device with the Doogee Fit app, your phone's connectivity will be available to that device.

1. Download the App: Search for and download the 'Doogee Fit' app from the Apple App Store or Google Play Store.
2. Install via QR Code: You can install the 'Doogee Fit' app by scanning the QR code on the watch with your phone, or you can scan the QR code below to download and install the app from the app store.


Image: QR code for downloading the Doogee Fit application.

3. Pairing Process: After installation, open the 'Doogee Fit' app; log in to the device page, select the watch to establish a connection (add the device, select DOOGEE Anyscene S3 or scan the watch's QR code).

Hint:

• During pairing, check if your phone's Bluetooth is enabled to ensure the watch can connect correctly.
• If the device is not found during the addition process, or if it cannot connect during use, restart the device in the watch's operation interface ('Settings - Factory Reset') and then add the device again.
• If you still cannot find your watch, exit and reopen the app.
• A notification will appear when pairing has been successful. A message will appear in the app. Select 'Allow pairing'. If no message appears, try pairing again.

SIM Card Installation

The DOOGEE Anyscene S3 supports a Nano SIM card for 4G connectivity and calling features.

1. Locate the SIM card slot on the side of the watch.
2. Carefully insert a Nano SIM card into the slot as shown in the diagram.
3. Ensure the SIM card is correctly seated to enable calling and network features.

Image: Diagram illustrating the correct way to insert a Nano SIM card into the watch.

Operating Instructions

Button Functions

The watch features physical buttons for various operations. Refer to the diagram and table below for their functions.

Image: Diagram showing the smartwatch with its physical buttons.

Touch Screen Functionality

Navigate the watch interface using various touch gestures:

• Change Watch Face: On the watch face screen, press and hold to change the watch face.
• Control Center: Swipe down to view the control center.
• Gadget List: Swipe up to explore the gadget list.
• Notifications: Swipe right to view the notification center.
• Shortcut Cards: Swipe left to view shortcut cards.
• Scroll: Swipe up and down to explore long pages.
• Turn Off Screen: Cover the screen with your palm to turn it off.

Image: Visual guide for touch screen gestures including swiping and tapping.

Applications and Features

Your watch comes with several pre-installed applications and gadgets for interactive functions and quick information access. You can find many applications in the gadgets or control menu. On the watch face, press the top right button and use the buttons to navigate through the applications.

Sports Modes

The watch offers a wide range of sports modes to track various activities. To access:

1. On the watch face, press the top right button.
2. Find and click the sports app.
3. You can select from preset sports or scroll down to add your favorite sports from categories like Winter Sports, Physical Exercise, Ball Sports, Water Sports, Dance, Extreme Sports, Leisure Sports, and Other Activities.

Starting an Exercise:

1. On the watch face, press the top right button.
2. Choose a sport.
3. Select an option from the preset list or add a new one.
4. After accessing the exercise list, you can select target exercise settings (time, distance, calories) in the top right corner.
5. Click GO to start the activity timer. The watch only records movement data when the activity timer is running.

Activity Recording Tips

• Ensure your watch has a full battery before starting activity.
• Swipe up or down to view other data pages during activity.
• To prevent accidental touches, the screen will lock during water activities. Press the bottom right button to unlock the touch screen.
• Swipe right or left to view music controls during activity.

Ending an Event:

1. Press the top right button to pause the activity.
2. Choose an option:
• To continue, press the top right button.
• To save and view details, press and hold the bottom left button to end and save the event.

Control Center

The control menu provides quick access to watch functions and options. You can add, rearrange, and remove options. On the watch screen, swipe down to access the control center.

Gadgets

The watch comes pre-installed with several gadgets for quick information access. Some require a Bluetooth connection.

Health Settings

After linking your device, you can configure health monitoring settings in the Doogee Fit APP > Health Monitoring page.

• Heart Rate Threshold: Configure your heart rate threshold and activate/deactivate all-day measurement.
• Abnormal Heart Rate Alert: The watch will vibrate and display a pop-up if your heart rate exceeds or falls below a set threshold.
• Sedentary Reminder: Encourages activity after an hour of inactivity. Customize reminders in the app.
• Blood Oxygen Monitoring: The pulse oximeter sensor measures SpO2. Access the blood oxygen meter to manually start monitoring or set it to continuous mode.

Communication Features

The Anyscene S3 allows for various communication methods:

• Making Calls: (Requires Bluetooth connection to a compatible phone) On the watch face, press the top right button, select 'Call'. Choose to dial using the dial pad or select a contact. Configure emergency contacts in the Doogee Fit app for one-click emergency calls.
• Answering/Rejecting Calls: When a connected phone receives an incoming call, the watch displays the caller's information. Select the appropriate icon to answer or reject the call.
• Voice Assistant: (Requires Bluetooth connection) Use the watch's built-in speaker and microphone to interact with your phone's voice assistant. Press the bottom right button or find the voice assistant app via the top right button.
• Mobile Notifications: The watch synchronizes and displays notifications from your phone, including social media messages. Swipe right on the watch screen or find the notification app via the top right button to view.
• Disabling Bluetooth during Calls: In the control center (swipe down from watch face), select the Bluetooth icon to disable the Bluetooth connection for calls between the device and the phone.

System Settings

Access system settings to customize your watch experience. On the watch screen, press the top right button to find 'Settings' and tap to enter.

• Change Watch Face: Customize the watch's display.
• Language Selection: Configure the device language.
• Always-On Display: Configure the watch screen with always-on display.
• Screen and Brightness: Adjust brightness, screen on time, and raise-to-wake/tap-to-wake settings.
• Sound and Vibration: Adjust ringtone volume, vibration intensity, multimedia audio, and mute switches.
• Transition Effects: Customize page transition effects.
• Theme: Change themes.
• Password: Set a six-digit password for personal information security.
• Date and Time: App synchronization on/off.
• 'Do Not Disturb' Mode: Activate all day or schedule.
• Motion Recognition: System recognizes described motion patterns when activated.
• Card Settings: Add or remove cards in the first-level interface.
• Down Key Settings: Customize the down key functions.
• Cover and Turn Off Screen: Cover and touch the screen with your palm to turn it off.
• System Menu: Options to restart, power off, or restore factory settings.
• About: Displays device name, version number, MAC address, and FCC ID.

Maintenance

Wearing the Device

Wear the watch comfortably on your wrist. For more accurate heart rate and pulse oximetry data, ensure the device is still during measurements and fits snugly above the wrist bone without wobbling during movement.

Image: Diagram illustrating the proper fit of the smartwatch on the wrist for optimal sensor performance.

When swimming, ensure the device is in direct contact with your skin and avoid contact with other devices worn on the wrist. The optical sensor is located on the back of the watch.

Charging and Storage

• If your watch does not turn on after a long period of inactivity, clean the charging cable contacts to remove any sweat or moisture.
• If you don't use it frequently, charge it once a month to maintain battery health.

Water Resistance

The DOOGEE Anyscene S3 is IP68 waterproof, protecting it from rain, splashes, and everyday play. However, it is not suitable for deep diving or high-pressure water activities.

Image: Child swimming while wearing the IP68 waterproof smartwatch.

Troubleshooting

Frequently Asked Questions

1. Cannot connect via Bluetooth:
   • Check if your phone's operating system is Android 5.0/iOS 9.0 or later.
   • Check if the watch is connected to another phone. If so, disconnect it first.
   • Check if your phone's Bluetooth is enabled and working correctly. It is recommended to close all apps and reactivate them before connecting.
2. Messages will not be notified:
   • Make sure your phone's Bluetooth is enabled and connected to the watch.
   • Check if you have authorized the Doogee Fit app to run in the background on your mobile phone.
   • Verify if the device's notification and reminder switches are working correctly and open the corresponding apps in the Doogee Fit APP.
   • Check if your phone's notification bar shows app or SMS notifications. Otherwise, check system app permission pop-up notifications.
   • If the above steps do not resolve the problem, restart the watch and your phone, then try connecting again.
   • Check if the watch is in Do Not Disturb mode. (When Do Not Disturb mode is deactivated, message notifications and the wrist sensor will be activated).
3. How to sync data:
   • Automatic synchronization: When the watch connects successfully, data will automatically synchronize with the phone via the app.
   • Manual synchronization: After the watch has successfully connected, you can manually synchronize data by opening the data list on the app's home page and the data interface via the mobile app.
   • If data cannot be synchronized, turn Bluetooth off and on again or restart your phone.
   • Note: The FAQs in the app's user center can help you solve some problems when using this device.
4. How to check watch version, update information, units, time format, user guide, factory reset, more sports activities, and unpair the device:
   • Access these options via 'App Settings: More options' in the Doogee Fit app or through the watch's 'Settings' menu.

Troubleshooting Tips for Wrist Heart Rate Tests

If your heart rate data is abnormal or not displayed, try the following:

• Clean and dry your wrists before using the device.
• Avoid applying sunscreen, lotion, or mosquito repellent to the areas where you wear the device.
• Avoid scratching the heart rate sensor on the back of the device.
• Make sure the watch fits comfortably above the wrist bone and does not wobble during movement.
• Before starting activity, warm up for 5 to 10 minutes to read your heart rate.
• In cold environments, warm up indoors first.
• Use a silicone strap during training whenever possible.

Specifications

Image: Detailed comparison table highlighting specifications for Anyscene S1 and Anyscene S3 models.

Image: Overview of key features including HD Video Call, Dual Cameras, 5-Day Battery Life, IP68 Waterproof, GPS+WiFi+LBS Tracking, 2GB+16GB Storage, App World, Parental Control, and Health Monitoring.

User Tips

• Keep Software Updated: Always ensure your watch software is updated to the latest version for optimal performance and new features.
• SIM Card for Full Functionality: To enable calling and 4G connectivity, ensure a Nano SIM card is properly inserted.
• Parental Control App: Utilize the Doogee Fit app for comprehensive parental controls, including location tracking, managing contacts, and setting safe zones.
• Battery Optimization: For extended battery life, consider enabling power-saving mode when not actively using advanced features.
• Proper Fit for Health Monitoring: For accurate heart rate and blood oxygen readings, ensure the watch fits snugly but comfortably on the wrist, and remain still during measurements.

Image: Smartphone screen showing parental control options for managing the smartwatch.

Warranty and Support

For detailed information regarding warranty, service, and additional support, please refer to the official user manual PDF provided by DOOGEE. This document contains comprehensive guides and troubleshooting steps not covered in this summary.

You can access the official user manual (PDF) for the DOOGEE Anyscene S3 via the following link: DOOGEE Anyscene S3 User Manual (PDF)