PowMr M25, M35, M45 PRO

Contents

PowMr MPPT Solar Charge Controller

Models: POW-M25-PRO, POW-M35-PRO, POW-M45-PRO

1. Product Introduction

Welcome to the PowMr M-series solar controllers, a forefront innovation in solar technology designed to provide exceptional performance and reliability for your solar system. These meticulously designed controllers incorporate advanced digital control technology, featuring an LCD screen and user-friendly buttons to enhance configuration flexibility, allowing real-time monitoring of operational data and system status. Additionally, the controllers support Maximum Power Point Tracking (MPPT) battery charging mode, maximizing energy utilization efficiency.

The PowMr M-series solar controllers are engineered to meet diverse solar system requirements, whether in standalone systems or other application scenarios. They automatically control the battery charging and discharging processes, optimizing these operations to extend battery life and improve overall system performance. Equipped with self-detection and electronic protection functions, the controllers effectively prevent damage during installation errors or system malfunctions, ensuring system reliability and stability.

Our PowMr M-series solar controllers offer extensive expandability and customization options, streamlining the solar system configuration process. Whether you are building a standalone solar system or expanding a solar energy project, the PowMr M-series controllers will be an indispensable partner. Their compact size and lightweight design, combined with air-cooled and aluminum alloy backplate natural cooling technologies, enhance operational safety, stability, and suitability for various scenarios. The parallel function allows users to easily scale up their solar energy capacity.

The PowMr M-series solar controllers are available in 25A, 35A, and 45A charging current options, ensuring your solar system can efficiently capture and store energy. We are committed to advancing solar technology, offering you exceptional products and services to support your solar system construction.

PowMr MPPT Solar Controller with key features highlighted
Figure 1: PowMr MPPT Solar Controller with key features including MPPT Technology, Battery Support, Multiple Protection, and Wide Application.

2. Important Safety Guidelines

Warning: Please carefully read and adhere to all safety instructions.

  • Before installing and operating the controller, carefully read the user manual and keep it stored safely for future reference.
  • Installation or operation of the controller is not permitted for the following individuals without strict guidance and supervision:
    1. Anyone lacking the relevant knowledge, experience, or capability for safe installation and/or operation requirements.
    2. Anyone with impaired or diminished physical, sensory, or intellectual capabilities that may affect safe installation and/or operation (including children).

Controller Installation and Operation

  • This controller product has no user-serviceable parts. Do not dismantle or attempt to repair the controller.
  • Install the controller in an environment with good natural ventilation and ensure sufficient spacing around it.
  • Mount the controller on a non-flammable wall and ensure there are no flammable materials nearby; temperature elevation during controller operation is normal.
  • Install the controller in an environment free from direct sunlight, rainwater, humidity, and dust, and keep it away from any flammable liquids or gases. The controller is for indoor use only.
  • Do not install or place/operate the controller on top of or directly above batteries or in enclosed spaces containing batteries, as batteries release explosive gases.
  • Do not place any other items on top of the controller.

Battery Installation and Charging

  • Install and charge batteries in a well-ventilated or exhaust environment.
  • Ensure there are no sources of ignition around the batteries, as they release explosive gases.
  • Battery acid is corrosive; if battery acid comes into contact with the skin, immediately rinse with clean water.
  • Do not charge non-rechargeable batteries. Do not charge lithium batteries when the temperature is below 0°C. Charging frozen batteries is prohibited.
  • Ensure the equipment is set up reasonably according to the connected battery type.

3. Product Appearance

Diagram of PowMr Solar Charge Controller with labeled components
Figure 2: Front and side views of the PowMr Solar Charge Controller, highlighting its compact design and heat sink.
Controller Components
No. Component No. Component
1 LCD Display 5 Load Interface
2 Function Buttons 6 Port Cover
3 PV Input Interface 7 Heat Sink
4 Battery Interface 8 Mounting Holes

4. Setup

4.1 Unboxing and Inspection

Before unboxing, check if the packaging is damaged. After unboxing, inspect the contents for any damage or missing items. Inside the package, you should find:

  • Controller
  • User Manual
  • Dedicated Mounting Screws
  • Installation Guide Card

4.2 Selecting Installation Location

Before installation, consider the following aspects to determine a suitable and safe installation location:

  • Install the controller in a space with good natural ventilation/exhaust.
  • Avoid direct sunlight.
  • Ensure there is sufficient clearance around the controller. The minimum clearance for the top, bottom, and sides of the controller is 75mm.
  • Mount the controller on a non-flammable wall and ensure there are no flammable materials nearby; temperature elevation during controller operation is normal.
  • Install the controller in an environment free from direct sunlight, rainwater, humidity, and dust, and keep it away from any flammable liquids or gases. The controller is for indoor use only.
  • Do not install or place/operate the controller on top of the battery, directly above it, or in an enclosed space where the battery is located, as the battery may release explosive gases.

4.3 Wiring Precautions

  1. Installation and wiring should be carried out by a certified electrician.
  2. Follow this sequence when wiring: Battery > PV Input > DC Output.
  3. To avoid short circuits and reverse polarity, ensure that the positive (+) cable is connected to the positive (+) terminal of the equipment and the negative (-) cable to the negative (-) terminal.
  4. Undersized or loose connections can cause cables or terminals to overheat. Therefore, tighten all cables to minimize transitional resistance. Use cables of appropriate size according to the current of the specific circuit.

4.4 Installation and Wiring Guide

Step 1. Mounting the Controller: Install the controller vertically with the ports facing downward. Secure it to the wall using screws through the four mounting holes on the body. For easier installation, it is recommended to "hang" the equipment using the two upper screws first, then add the two lower screws, and finally secure all four screws completely.

Diagram showing wall mounting of the solar charge controller
Figure 3: Wall mounting diagram for the solar charge controller.

Step 2. Battery Wiring: Connect the battery to the controller using cables.

NOTICE:

  • If an inverter needs to be connected, please refer to the diagram below.
  • All wiring work must be performed by professionals.
  • For safe operation and proper application, corresponding breakers must be installed on the cables connected to the controller, and ensure all connections are tight.
  • Ensure all breakers are in the OFF position before completing all wiring.
  • Connect the positive cable terminal to the positive port and the negative cable terminal to the negative port.
  • The above precautions also apply to PV ports and DC output ports.
Wiring diagram for battery, PV array, and DC load connections to the solar charge controller, including an inverter connection to the battery.
Figure 4: Schematic wiring diagram for connecting the solar array, battery, and load to the controller, including an inverter.

Step 3. PV Wiring: Connect the PV array to the controller using cables.

Step 4. DC Output Wiring: Connect the load to the controller using cables.

Step 5. Pre-start Check: Refer to the wiring diagram. If all connections are accurate and secure, close the battery and PV array breakers in sequence.

WARNING: Risk of electric shock!

Ensure all power sources are off before wiring, and follow appropriate inspection and operation procedures.

5. Operating Instructions

5.1 Button Introduction

Diagram of the controller's LCD display and buttons with numbered labels
Figure 5: Controller front panel with LCD display and function buttons.
LCD Display Indicators
No. Function
① Day/Night Indicator
② Indicates remaining battery power.
③ Operation mode (see "5.3 Operation Mode Description").
④ Load periodic operation status and alert status (see "8.2 Troubleshooting").
⑤ Indicates PV input voltage/power.
⑥ Indicates current battery voltage/charging current/device temperature/battery calibration voltage/battery type/boost charging voltage/float charging voltage/DC under-voltage recovery voltage/DC under-voltage cutoff voltage.
⑦ Indicates load operation mode.

5.2 Key Introduction

Function Key Descriptions
Function Key Action Description
PV / Browsing Mode Switches PV input parameter information
BAT / ▲ Browsing Mode Short press: Switches battery information (to the next option)
Long press Enters battery parameter settings
DC / ▼ Browsing Mode Switches battery information (to the previous option)
Long press Enters load operation mode settings
SET / ⚙️ Short Press Confirms and saves settings
Long Press Restores factory settings

5.3 Operation Mode Description

Operation Modes
Code Description
3.0 Night mode, not charging
4.0 Fast charging mode (MPPT mode)
7.0 Boost charging mode
8.0 Float charging mode

Note: In case of a fault, the operation mode section will display the fault code. For details, please refer to section 8.2 Troubleshooting.

5.4 Overview of PV Parameters

Short press the PV / button, and the data on the left side of the screen will switch between PV input voltage and power.

5.5 Battery Parameters Overview and Settings

In browse mode, use the BAT/▲ and DC/▼ keys to scroll through the battery parameters. When you reach the parameter you want to set, long press the BAT/▲ key to enter parameter setting mode. Once in the specified parameter setting, adjust the value size or toggle options using the BAT/▲ and DC/▼ keys, then press the SET/⚙️ key to confirm the settings.

Battery Calibration Voltage

When there is a discrepancy between the battery voltage monitored by the controller and the value measured by a multimeter, you can calibrate the battery voltage using this setting.

Battery Type Selection

Please select the battery type according to the table below based on the connected battery:

Battery Type Options
Sequence Display Battery Type
1 SEL Sealed lead-acid battery
2 GEL Gel sealed lead-acid battery
3 FLd Flooded lead-acid battery
4 L04 4S Lithium iron phosphate battery
5 L07 7S Lithium iron phosphate battery
6 L08 8S Lithium iron phosphate battery
7 N03 3S Lithium-ion battery
8 N06 6S Lithium-ion battery
9 N07 7S Lithium-ion battery
10 USE User-defined

Long press the BAT/▲ key to enter the setting program. Use the BAT/▲ and DC/▼ keys to toggle through the battery type options, then press the SET/⚙️ key to save and confirm. If you select User-defined battery type, you can proceed with setting the following battery parameters.

Custom Configuration of Charging Voltage

If the battery type is set to "USE" (User-defined mode), you can manually adjust the following 5 charging parameters. If "USE" is not selected, manual adjustment of charging parameters is not required. The controller will charge based on preset values corresponding to the battery type. Refer to section 5.6 for preset charging values.

  • System Voltage Setting Interface: System voltage options: 12V/24V.
  • Boost Charging Voltage Setting Interface: Default: 14.4V, adjustable range: 9.0~17.0V, step size: 0.1V.
  • Float Charging Voltage Setting Interface: Default: 13.8V, adjustable range: 9.0~17.0V, step size: 0.1V.
  • Under-voltage Recovery Voltage Setting Interface: Default: 12.6V, adjustable range: 9.0~17.0V, step size: 0.1V.
  • Under-voltage Cut-off Voltage Setting Interface: Default: 11.0V, adjustable range: 9.0~17.0V, step size: 0.1V.

5.6 Default Parameters for Different Battery Types

For Lead-acid Batteries and User-defined Batteries:
Lead-acid & User-defined Battery Parameters (12V System)
Parameter FLd GEL SEL USE
Boost Charge Voltage 14.6V 14.2V 14.4V 9.0~17.0V
Float Charge Voltage 13.8V 13.8V 13.8V 9.0~17.0V
Low Voltage Cutoff Voltage 11.0V 11.0V 11.0V 9.0~17.0V
Low Voltage Recovery Voltage 12.6V 12.6V 12.6V 9.0~17.0V
For Lithium-Ion Batteries:
Lithium-Ion Battery Parameters
Parameter N03 N06 N07
Boost Charge Voltage 12.5V 25.0V 29.2V
Float Charge Voltage 12.2V 24.4V 28.5V
Low Voltage Cutoff Voltage 8.4V 16.8V 19.6V
Low Voltage Recovery Voltage 9.0V 18.0V 21.0V
For LiFePO4 Batteries:
LiFePO4 Battery Parameters
Parameter L04 L07 L08
Boost Charge Voltage 14.5V 25.4V 29.0V
Float Charge Voltage 13.8V 24.1V 27.6V
Low Voltage Cutoff Voltage 11.2V 19.6V 22.4V
Low Voltage Recovery Voltage 12.0V 21.0V 24.0V

NOTICE: The charging parameters for lead-acid and user-defined batteries in the above table are based on a 12V system voltage. For 24V system voltage, multiply these values by 2. Similarly, for lead-acid or user-defined battery types with a system voltage of 24V, the actual charging voltage will be twice the displayed voltage on the monitor.

5.7 Charging Stages

Three stages of lead-acid battery charging:
Graph showing three stages of lead-acid battery charging: Bulk, Boost, and Float, with voltage and current curves over time.
Figure 6: Lead-acid battery charging stages.
Two stages of lithium battery charging:
Graph showing two stages of lithium battery charging: Bulk and Boost, with voltage and current curves over time.
Figure 7: Lithium battery charging stages.

6. Maintenance

We recommend conducting the following checks and maintenance at least twice a year to ensure optimal performance:

  1. Ensure the controller is securely mounted in a clean and dry environment.
  2. Ensure proper airflow around the controller and clean any dust or debris from the heat sinks.
  3. Inspect all exposed wires for insulation damage, such as severe sun exposure, friction wear, dryness, insect or rodent damage. Repair or replace any damaged wires as necessary.
  4. Tighten all terminals and check for loose, broken, or burnt cable connections.
  5. Confirm that all system components are properly grounded.
  6. Ensure all terminals are free from corrosion, insulation damage, high temperatures, or signs of burning/discoloration, and tighten terminal screws.
  7. Check for dirt, nesting insects, and corrosion. If present, clean promptly.

WARNING: Risk of electric shock!

Before performing the above operations, ensure that all power sources are turned off and then follow the relevant check and operation guidelines.

7. Troubleshooting

When a fault occurs, the controller will display a fault signal on the LCD to assist you in identifying solutions.

LCD screen displaying a fault code '63' and a table of fault codes, causes, and solutions.
Figure 8: LCD display showing a fault code and troubleshooting guide.
Fault Codes and Solutions
Fault Code Fault Cause Solution
18 Input photovoltaic voltage too low Increase the number of solar panels or connect them in series to raise the photovoltaic input voltage.
60 Overtemperature protection Allow the equipment to cool to below the recovery temperature to resume normal charging and discharging.
63 Battery voltage too high Measure to confirm if battery voltage exceeds rated voltage and disconnect photovoltaic array circuit breaker.
65 Battery voltage too low Charge the battery until voltage exceeds the undervoltage recovery point. Refer to "5.6 Default Parameters for Different Battery Types" for specific details.
71 Input photovoltaic voltage too high Reduce the number of photovoltaic arrays connected to the controller to lower photovoltaic input; or adjust series and parallel connections to reduce voltage or current values.
73 Overcharging current Reduce output terminal load to ensure total load is within rated limits of the controller and battery.
72 Overdischarging current Reduce output terminal load to ensure total load is within rated limits of the controller and battery.

7.1 Protection Functions

Protection Functions Overview
Protection Description
Photovoltaic array short circuit When a short circuit occurs in the photovoltaic array, the controller will cease charging. Rectifying the short circuit fault will restore operation.
Photovoltaic input overcurrent The controller limits the battery charging current to the maximum rated value. Therefore, an overcurrent from the photovoltaic array will prevent operation at peak power.
Load overcurrent protection When the load current reaches its rated value, the controller automatically shuts down the DC output. It will recheck the output after 5 minutes to detect if overcurrent persists.
Photovoltaic polarity reversal If the photovoltaic wiring polarity is reversed, the controller will not operate. Correct connection is necessary to restore normal operation.
Battery polarity reversal Similarly, if the battery wiring polarity is reversed, the controller will not function until correct connection is restored.
Overtemperature When the controller's heatsink temperature exceeds 65°C, it automatically begins reducing the charging current. If it exceeds 80°C, the controller shuts down automatically.

8. Specifications

General Specifications
Parameter Category Parameter Item 25A Model 35A Model 45A Model
Solar Input Parameters Max. Input Power (For 12V System) 300W 420W 540W
Max. Input Power (For 24V System) 600W 840W 1080W
Input Voltage Range (For 12V System) <60V <80V <100V
Input Voltage Range (For 24V System) <60V <80V <100V
Battery Charging Parameters Charging Technology MPPT
Charging Algorithm 3 Stages
Nominal System Voltage 12V/24V
Battery Voltage Range 9~30V
Rated Charging Current 25A 35A 45A
Conversion Efficiency ≥98%
General Parameters Max. Power Point Tracking Efficiency >99%
Temperature Compensation -3mV/°C/2V (default)
Self-Consumption 44mA/12V; 26mA/24V
DC Output Parameters Rated DC Output Current 15A 20A 25A
Physical & Environmental IP Class IP32
Operating Temperature Range -35°C ~ +45°C
Humidity Range ≤95% Non-condensing
Altitude <3000m
Dimensions 160x115x51mm 195x135x65mm 195x135x65mm
Net Weight 500g 900g 1035g

9. User Tips

  • Ensure all wiring is correctly and securely connected as per the manual to achieve optimal performance.
  • The product has been reported to work as described when properly installed.

10. Warranty and Support

For technical support, warranty claims, or further inquiries, please contact PowMr directly:

  • Manufacturer: SHENZHEN HEHEJIN INDUSTRIAL CO.,LTD
  • Tel/Fax: +86 755-28219903
  • Email: support@powmr.com
  • Web: www.powmr.com
  • Address: Henggang Street, Longgang District, Shenzhen, Guangdong, China

A detailed user manual in PDF format is available for download: PowMr Solar Charge Controller User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.