1. Introduction
The AceGamer D4 is a versatile wireless gaming controller designed for a superior gaming experience across multiple platforms. Featuring a symmetric design for ergonomic comfort, it incorporates advanced technologies such as custom JS13PRO TMR Joysticks, Hall Effect triggers, and a multi-function touchpad. With its multi-mode connectivity (Bluetooth, 2.4G wireless, and wired USB-C), the D4 controller offers seamless compatibility with PC, PlayStation 4, Steam, Nintendo Switch, Android, iOS, and Raspberry Pi devices.
2. Safety Warnings
WARNING!
- This product contains small parts. Keep away from children under 3 years old to avoid choking hazards.
- Do not disassemble, squeeze, drop, or expose the controller to fire, water, high temperatures (above 60°C / 140°F), or high humidity (above 80%).
- Use only certified 5V/2A chargers. Do not use fast chargers (over 5V/2A) to avoid battery damage or fire risk.
- If the controller exhibits abnormal heat, odor, or deformation during charging or use, discontinue use immediately.
- Keep the controller away from strong magnetic fields (e.g., speakers, magnets) to prevent potential system interference.
3. Package Contents
Please check the package for the following items:
- 1 × AceGamer D4 Wireless Gaming Controller
- 1 × USB-C Charging Cable
- 1 × 2.4G Wireless Receiver
- 1 × Replaceable Cross D-Pad Keycaps
- 1 × User Manual (This Document)

4. Setup Guide
4.1 First Startup
- Unpack the controller and verify that all accessories are present.
- Press and hold the central PS button for approximately 3 seconds to power on the controller.
- If the controller does not power on, connect it to a 5V/2A charger and charge for at least 15 minutes, then attempt to power on again. The battery may be fully discharged.
4.2 Charging Guide
- Connect one end of the included USB-C cable to the controller's USB-C port and the other end to a certified 5V/2A wall charger or a computer USB port.
- During charging, the indicator light on the controller will typically glow red. Once fully charged, the indicator light will turn green.
- A full charge takes approximately 2.5 hours. It is recommended to fully charge the controller before its first use. Avoid overcharging for more than 12 hours.
4.3 Connecting to Devices
The AceGamer D4 controller supports three connection modes: Bluetooth, 2.4G Wireless, and Wired (USB-C).
Bluetooth Connection
- Ensure the controller is powered off.
- Press and hold the Bluetooth pairing button (refer to controller diagram for exact location, typically a small button or a combination with the PS button) until the indicator light flashes rapidly, indicating pairing mode.
- On your device (PC, Android, iOS, etc.), go to Bluetooth settings and search for new devices.
- Select "AceGamer D4" from the list of available devices to pair. The indicator light on the controller will become solid once connected.
2.4G Wireless Connection
- Plug the 2.4G wireless receiver into an available USB port on your PC, PS4, or other compatible device.
- Power on the AceGamer D4 controller.
- The controller should automatically connect to the receiver. If not, press the pairing button on the controller (and potentially on the receiver if it has one) to initiate pairing. The indicator light will become solid when connected.
Wired USB-C Connection
- Connect the USB-C cable directly from the controller to a USB port on your PC, PS4, or other compatible device.
- The controller will be recognized as a wired gamepad. This mode also charges the controller.
5. Basic Operation

- Power On/Off: Press and hold the central PS button for 3 seconds. A short press may lock/unlock certain features or bring up system menus on compatible platforms.
- TMR Joysticks: Use for precise control of in-game character movement and camera. These joysticks feature high-precision sensing and strong rebound damping.
- D-Pad: Provides directional input. The D-pad is replaceable, allowing for customization.
- ABXY Buttons: Standard action buttons (A, B, X, Y). These utilize liquid silicone and mechanical micro switches for ultra-short travel and fast response.
- Shoulder Buttons (L1/R1): Ultra-large micro shoulder buttons provide millisecond trigger response and uniform key feel, ideal for rapid combos.
- Trigger Buttons (L2/R2): Hall-Linear / Micro Dual-Mode Triggers. Switch between Hall-Linear mode for precise throttle control in racing games (8mm long travel) and Micro Quick Trigger mode for rapid shooting in FPS games (short stroke).
- SHARE/OPTIONS Buttons: Used for game-specific functions, accessing in-game menus, or sharing content depending on the platform.
- Multi-function Touchpad: Offers native compatibility with PS4 and supports multi-button mapping for enhanced control.
- Customizable Back Buttons (P1, P2, P3, P4): The controller features 4 customizable expansion buttons on the back. These can be programmed for macro recording, supporting up to 24 actions per single key for complex operations.
- Six-axis Gyroscope: Enables motion control in supported games.
- Vibration: The controller features four-motor layered vibration with three-speed adjustment, providing immersive haptic feedback.
6. Software Configuration (KeyLinker)
The AceGamer D4 controller supports software configuration to personalize your gaming experience. Utilize the dedicated "KeyLinker" software to:
- Customize button mapping for all programmable buttons.
- Create and assign complex macros to the 4 customizable back buttons.
- Adjust joystick dead zones and sensitivity.
- Fine-tune vibration intensity.
Please refer to the KeyLinker software documentation for detailed instructions on installation and usage. The software allows for an advanced and exclusive enhanced experience.

7. Specifications
| Model | AceGamer D4 |
| Connection Method | Bluetooth, 2.4G Wireless, Wired (USB-C) |
| Compatible Platforms | PC, PS4, Steam, Switch, Android, iOS, Raspberry Pi (PS5 supports PS4 games) |
| Joysticks | Custom JS13PRO TMR Tunnel Magnetoresistive Joysticks (Hall Effect) |
| ABXY Buttons | Liquid Silicone + Mechanical Micro Switches (90gf actuation force) |
| D-Pad Type | MEMBRANE (Replaceable Cross D-Pad) |
| Shoulder Buttons | Micro Switch Shoulder Buttons |
| Trigger Buttons | Hall-Linear / Micro Two-way Trigger (Dual-stage) |
| Vibration | Four-motor layered vibration (3-speed adjustable) |
| Motion Control | Six-axis Gyroscope |
| Touchpad | Multi-function Touchpad |
| Back Buttons | 4 Customizable Expansion Buttons (Macro programming up to 24 actions) |
| Battery Capacity | 1000mAh Rechargeable Lithium Battery |
| Battery Life | 6-8 hours (continuous gameplay), up to 30 days (standby) |
| Charging Time | Approximately 2.5 hours (with 5V/2A charger) |
| Reporting Rate | 1000Hz (Wired & 2.4G, X-INPUT Mode) |
| Dimensions | 156 × 104 × 65mm |
| Weight | Approximately 260g |
| Certification | CE, FCC Part 15B, RoHS, EU WEEE |

8. Troubleshooting (Common Problems & Solutions)
| Issue | Possible Cause | Solution |
|---|---|---|
| Controller does not power on | Battery fully discharged / Incompatible charger | Charge the controller for at least 15 minutes using a certified 5V/2A charger. Ensure the charger is compatible. |
| Controller unresponsive or erratic behavior | Joystick stuck / Temporary system glitch | Restart the controller. If a joystick feels stuck, gently clean around it with a dry cloth. |
| Controller not charging | Loose cable / Damaged USB port or cable | Ensure the USB-C cable is securely connected. Try using a different USB-C port on the controller or a different charging cable. |
| Connection issues (Bluetooth/2.4G) | Incorrect pairing mode / Receiver not recognized | Ensure the controller is in the correct pairing mode for your chosen connection type. For 2.4G, ensure the receiver is properly connected. Try re-pairing the controller with your device. |
9. User Tips
- Joystick Calibration: If you experience joystick drift, check the KeyLinker software for calibration options to ensure optimal precision.
- Customization: Take advantage of the KeyLinker software to customize button mappings and create macros for the back buttons. This can significantly streamline complex actions in games.
- Trigger Modes: Experiment with the dual-stage trigger modes. Use the Hall-Linear mode for precise control in racing or flight simulators, and switch to the Micro Quick Trigger for faster response in shooting games.
- D-Pad Replacement: The replaceable D-pad allows you to switch between different styles. Try both to find which one suits your gaming preference best.
10. Compliance & Certification
This product complies with international safety standards and relevant regulations, including:
- CE Certification: EN 62368-1, EN 55032, EN 300 328
- FCC Part 15B
- RoHS Certification: Lead-free, environmentally friendly materials
- EU WEEE Compliance: Recyclable electronic product
For EU customers, EU representative information is available upon request (contact customer service).
11. Warranty Information
- Warranty Period: A 12-month free warranty is provided for the controller unit. Accessories (such as the USB-C cable and 2.4G receiver) are covered by a 30-day free warranty.
- Warranty Scope: The warranty covers product performance failures caused by non-human factors, including system glitches, battery damage under normal use, and button failures.
- Non-Warranty Scope: The warranty does not cover damage caused by human factors such as disassembly, dropping, water ingress, improper charging, or damage from unauthorized software/firmware. Products beyond their warranty period are also excluded.
12. Support
For any problems or inquiries regarding your AceGamer D4 Wireless Gaming Controller, please contact the customer service of the store where you purchased the product. Our support team aims to reply within 24 hours and provide solutions, including repair or replacement services where applicable.