Neverness To Everness Gamepad KunPeng 70 X NTE Limited Edition Wireless Gamepad User Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Neverness To Everness Gamepad KunPeng 70 X NTE Limited Edition Wireless Gamepad. Please read this manual thoroughly before using the product to ensure proper function and safety.

Figure 1: Neverness To Everness Gamepad KunPeng 70 X NTE Limited Edition Wireless Gamepad (Mint and Lacrimosa editions)

2. Safety & Warnings

2.1 General Warning

• ATTENTION: Not suitable for children under 36 months.

2.2 Special Warning for Lithium Battery & Button Battery

• WARNING: Keep out of reach of children. In case of ingestion, seek medical attention immediately.
• Swallowing can lead to chemical burns, perforation of soft tissue, and death. Severe burns can occur within 2 hours of ingestion.

Figure 2: Warning against swallowing button batteries (as per NOTE BS EN IEC 60086-4:2019, Figure 9, modified).

2.3 Other Safety Warnings

• WARNING: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. Dispose of lithium-ion batteries safely in accordance with local regulations.
• WARNING: Do not immerse the product in water or any liquid. Keep away from high temperature, fire, and strong impact.
• WARNING: Do not disassemble, repair, or modify the product without permission. Stop using immediately if overheating, smoke, or peculiar smell occurs.

3. Setup & First Use

1. Unpack and Inspect: Check the controller and all included accessories (charging cable, wireless adapter, user manual) for completeness and any visible damage.
2. Charge Battery (Wireless Models): For wireless controllers, ensure the built-in battery is sufficiently charged. Full charge time is approximately 2-4 hours.
3. Compatibility Check: Confirm that your gaming platform (PC, console, mobile device, or tablet) is compatible with the controller and has an available USB port or Bluetooth function. This gamepad is compatible with PC, Xbox, TV, Steam, Mobile Phone, and Nintendo Switch.
4. Familiarize with Layout: Take time to familiarize yourself with the controller layout, including analog sticks, D-pad, action buttons, triggers, bumpers, and system function buttons (Start, Select/Back, Home/Guide).

Figure 3: Mint Edition Gamepad and Included Peripherals

4. Operating Instructions

4.1 Wired Connection

1. Connect the USB cable directly to your device's USB port and the other end to the controller.
2. The system will automatically install necessary drivers. On most platforms, it will be recognized as an Xbox/PlayStation/Generic controller.
3. For PC gaming, some titles may require configuring button mappings in the game settings.

4.2 2.4G Wireless Connection (with USB Adapter)

1. Insert the wireless USB receiver into an available USB port on your device (PC or console).
2. Turn on the controller by pressing and holding the Home/Guide button or Power button until the indicator light flashes.
3. Press and hold the Pair/Sync button on the receiver (if available) and on the controller simultaneously for 3-5 seconds until the indicator lights become solid, indicating successful pairing.
4. The controller is now ready for use. The connection will be maintained within an effective range (typically 8-10 meters).

4.3 Bluetooth Connection

1. Turn on the controller by pressing the Home/Guide button.
2. Press and hold the Pair/Sync button (usually located on the top edge or next to the USB port) for 3-5 seconds until the indicator light begins to flash rapidly, indicating pairing mode.
3. On your device (PC, smartphone, tablet, or Switch), open Bluetooth settings, search for new devices, select the controller name (e.g., "Xbox Wireless Controller", "DualSense", or "Game Controller Pro"), and click to complete the connection.
4. Once paired, the controller will automatically reconnect to the last device when powered on in the future.

4.4 Console Specific Connection

• Xbox: Use the dedicated Pair button on the console and controller, or connect via USB cable for initial setup/wired use.
• PlayStation: Use the USB cable to connect to the console and press the PS button; for wireless, go to Accessories settings after initial wired pairing.
• Nintendo Switch: Go to Controllers menu, select "Change Grip/Order," then press and hold the Pair button on the controller until connected.

4.5 Advanced Features (Model Dependent)

• Vibration/Rumble: Adjust intensity in system settings or game options for immersive feedback.
• Audio Jack: Connect a 3.5mm headset directly to the controller for game audio and chat (functionality depends on platform support).
• Trigger Locks/Hair Triggers: If equipped, slide switches on the back of the controller to reduce trigger travel distance for faster response in FPS games.
• Rear Paddles/Buttons: Program additional buttons using the companion app or controller software for custom mappings.
• Motion Controls: Built-in gyroscope supports motion aiming and gestures in compatible games.
• Touchpad (PS controllers): Functions as a clickable touchpad on PlayStation and PC (with appropriate driver support).

5. Maintenance

5.1 Charging Operation (Rechargeable Models)

• Connect the USB-C charging cable to the controller's charging port and plug the other end into a standard 5V USB power source (console USB port, PC, or power adapter).
• An amber/orange indicator light typically means charging; the light will turn off or turn white/green once fully charged.
• When the battery is low, the controller may vibrate briefly or the indicator light will flash red; charge promptly to avoid interruption during gameplay.
• For controllers with removable batteries, replace with fresh alkaline or rechargeable batteries as needed.

5.2 After Use & Storage

• For wireless controllers, turn off the controller by pressing and holding the Home/Guide button for 5-10 seconds, or simply let it enter auto-sleep mode after a period of inactivity (typically 10-15 minutes) to conserve battery.
• Disconnect the USB cable or remove the wireless adapter from your device and store the controller in a cool, dry, and clean place away from direct sunlight.
• Clean the controller surface and crevices regularly with a soft, slightly damp cloth; avoid using harsh chemicals or submerging in water.
• Do not drop, strike, or apply excessive force to the analog sticks and buttons during gameplay or storage.
• Avoid exposing the controller to extreme temperatures, high humidity, or dusty environments for prolonged periods.

6. Troubleshooting

• Controller not connecting: Ensure the controller is charged. For wireless connections, verify the USB receiver is properly inserted or Bluetooth is enabled and paired. Try re-pairing the controller.
• Buttons not responding: Check if the controller is properly connected. If wired, try a different USB port or cable. If wireless, ensure it's within range and fully charged.
• Input lag: For wireless connections, ensure you are within the effective range (8-10 meters) and there are no significant obstructions. Check for interference from other wireless devices.
• Charging issues: Ensure the USB-C cable is securely connected to both the controller and a 5V USB power source. Check if the charging indicator light is active. Try a different cable or power source.
• Button mapping issues (PC): Some PC games may require manual configuration of button mappings within the game settings. Refer to the game's specific instructions.

7. Specifications

Figure 4: Detailed Feature Overview and Compatibility

8. User Tips

• Packaging: The product is typically well-packaged to prevent damage during transit. While minor external dents on the packaging may occur, the product itself is usually safe.
• Initial Setup: Always ensure the controller is fully charged before its first wireless use to avoid interruptions.
• Compatibility: This gamepad is highly versatile, compatible with PC, Xbox, TV, Steam, Mobile Phone, and Nintendo Switch. Ensure your device's drivers are up-to-date for optimal performance.

9. Warranty & Support

For warranty information and technical support, please refer to the manufacturer's official channels. The manufacturer details are as follows:

• Manufacturer: Chongqing Chuanliu Buxi E-Commerce Co., Ltd.
• Full Address: CN Chongqing Chongqing Municipality Other Districts Shizilu Sub-district, Huju Road 68, Unit 4-1#0150, Yuzhong District
• Email/Website/Telephone: 19978918839@163.com

For EU customers, the authorized representative is:

• EU Authorized Representative: MJCM SARL
• Address: 78 avenue des Champs Elysees Bureau 326, PARIS, FR
• Email: mjcm190928@gmail.com

For further assistance, you may also consult the User Manual (PDF) for additional details.