Introduction
This manual provides essential information for the safe and effective use of your ROBORE X8F Walking Pad Treadmill. Please read it thoroughly before initial setup, operation, and maintenance. Keep this manual for future reference.
Important Safety Information
WARNING: To reduce the risk of serious injury, read all safety instructions carefully before using this equipment. This unit is intended for home use only.
Please read this product manual carefully before installing or using your product.
- It is important to read this entire manual before assembling and using the equipment. Safe and efficient use can only be achieved if the equipment is assembled, maintained, and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions.
- Before starting any exercise program, you should consult your doctor to determine if you have any physical or health conditions that could create a risk to your health and safety, or prevent you from using the equipment properly. Your doctor's advice is essential if you are taking medication that affects your heart rate, blood pressure, or cholesterol level.
- Be aware of your body's signals. Incorrect or excessive exercise can damage your health. Stop exercising if you experience any of the following symptoms: Pain, tightness in your chest, irregular heartbeat, extreme shortness of breath, feeling lightheaded, dizzy, or nauseous. If you experience any of these conditions, you should consult your doctor before continuing with your exercise program.
- Keep children and pets away from the equipment. The equipment is designed for adult use only.
- Use the equipment on a solid, flat, level surface with a protective cover for your floor or carpet. For safety, the equipment should have at least 0.6 meters of free space all around it.
- Before using the equipment, check that the nuts and bolts are securely tightened.
- The safety level of the equipment can only be maintained if it is regularly examined for damage and/or wear and tear.
- Always use the equipment as indicated. If you find any defective components whilst assembling or checking the equipment, or if you hear any unusual noise coming from the equipment during use, stop. Do not use the equipment until the problem has been rectified.
- Wear suitable clothing whilst using the equipment. Avoid wearing loose clothing which may get caught in the equipment or that may restrict or prevent movement.
- The equipment has been tested and certified to EN ISO 20957-1; EN ISO 20957-5 under class H.C. Suitable for domestic, home use only. Maximum user weight: 136 KGS / 300 LBS.
- This equipment is not suitable for high precision applications.
- This equipment brake system is not relevant (for treadmills).
- Care must be taken when lifting or moving the equipment so as not to injure your back. Always use proper lifting techniques and/or use assistance.
Note: The provided user manual PDF (User manual (PDF)) contains general safety information and exercise guidelines, but its assembly instructions and parts list are for a spin bike, not the ROBORE X8F Walking Pad Treadmill. Please refer to the product packaging or seller for specific treadmill assembly instructions if needed.
Setup and Initial Use
The ROBORE X8F Walking Pad Treadmill is designed for ease of setup, often arriving 90% pre-installed. Follow these general guidelines for initial setup:
- Unpacking: Carefully remove the treadmill from its packaging. Retain packaging materials for future storage or transport.
- Placement: Place the treadmill on a solid, flat, and level surface. Ensure at least 0.6 meters of clear space around the equipment for safety.
- Unfolding (if applicable): If the handle is folded, carefully raise it to the upright position. The handle is fully foldable at 90 degrees and has a vertical rod length of 120 cm.
- Power Connection: Connect the power cord to a suitable electrical outlet.
- Pre-use Check: Before each use, ensure all visible parts are secure and free from damage. Check that the running belt is centered and tensioned correctly.
Operating Instructions
Control Method
The ROBORE X8F Treadmill is controlled via a remote control and features an integrated LED display.
Multi-functional LED Screen
The LED screen provides clear feedback on your exercise status:
- Time: Displays your exercise duration.
- Speed: Shows your current speed (1-12 km/h).
- Incline: Indicates the current incline level (0-15% Auto Incline).
- Calories: Estimates calories burned.
Auto ON/OFF
- The system turns on when any key is pressed or when it receives a signal input from the speed sensor.
- The system turns off automatically when the sensor has no signal input or no keys are pressed for approximately 4 minutes.
Resetting the Unit
The unit can be reset by either changing the battery (if applicable) or by pressing the mode key for 3 seconds.
Mode Selection
Use the MODE key to select and lock onto a particular function. Press and hold the MODE key for more than 5 seconds to switch between metric and imperial units.
- TIME: Press MODE until the pointer advances to TIME. The total working time will be shown.
- SPEED: Press MODE until the pointer advances to SPEED. The total working time will be shown.
- DISTANCE: Press MODE until the pointer advances to DISTANCE. The distance of each workout will be displayed.
- ODOMETER (if available): Press MODE until the pointer advances to ODOMETER. The total accumulated distance will be shown.
- PULSE (if available): Press MODE until the pointer advances to PULSE. Your current heart rate will be displayed in beats per minute. Place the palms of your hands on both contact pads (or put ear-clip to ear), and wait for 30 seconds for the most accurate reading.
- CALORIES: Press MODE until the pointer advances to CALORIES. The calories burned will be displayed.
- SCAN: Automatically displays the following functions in order: TIME-SPEED-DISTANCE-PULSE (if available)-CALORIES (repeats).
Incline Adjustment
The treadmill features a 0-15% automatic incline adjustment, allowing for smooth and effortless transitions without interrupting your workout.
Speed Modes
The treadmill offers a versatile speed range from 1-12 km/h, accommodating various fitness levels and activities:
- 1-4 km/h: Walking Speed, ideal for work hours or light activity.
- 4-8 km/h: Jogging Speed, suitable for brisk walking or light jogging (e.g., 6th gear slope).
- 8-12 km/h: Running Speed, for more intense cardio workouts (e.g., 12th gear slope).
Training Guidelines
To maximize your workout and minimize injury risk:
- Warm-up: Before each training session, perform warm-up exercises to enhance blood circulation and prepare muscles. Each stretch should be maintained for about 30 seconds without overstretching.
- Training Stage: During the main training phase, focus on maintaining your heart rate within the target range for at least 1 minute. For beginners, 15-20 minutes is a good starting duration.
- Cool-down: After your workout, perform cool-down stretches to gradually lower your heart rate and prevent muscle soreness.
Maintenance
Regular maintenance ensures the longevity and safe operation of your treadmill.
- Cleaning: Wipe down the treadmill surfaces with a damp cloth after each use. Avoid abrasive cleaners.
- Belt Lubrication: Refer to the specific instructions provided with your treadmill for belt lubrication frequency and method. Proper lubrication is crucial for belt longevity and smooth operation.
- Belt Alignment and Tension: Periodically check the running belt for proper alignment and tension. Adjust as needed according to manufacturer guidelines.
- Hardware Check: Regularly inspect all nuts, bolts, and fasteners to ensure they are securely tightened.
- Storage: When not in use, the treadmill can be easily folded and stored upright to save space.
Troubleshooting
- Treadmill does not power on:
- Ensure the power cord is securely plugged into both the treadmill and a working electrical outlet.
- Check the circuit breaker.
- Display not working or showing incorrect readings:
- Check the battery in the monitor (if applicable) and replace if necessary.
- Ensure all connections to the display are secure.
- Reset the unit by pressing the mode key for 3 seconds or by changing batteries.
- Unusual noise during operation:
- Stop using the treadmill immediately.
- Inspect for any loose parts or foreign objects.
- Contact customer support if the noise persists.
- Belt slipping or not moving smoothly:
- Check belt tension and alignment.
- Ensure the belt is adequately lubricated.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | ROBORE |
| Model Number | X8F |
| Application | Home Use Treadmill |
| Driving Power | Electric |
| Motor | 2.5HP Brushless Motor |
| Speed Range | 1–12 km/h |
| Incline | 0–15% Automatic Incline Adjustment |
| Noise Level | < 45 dB |
| Control Method | Remote Control + LED Display |
| Running Belt Length | 97 cm (Range: 80-120 cm) |
| Running Belt Width | 40 cm (Range: 30-50 cm) |
| Treadmill Width | 57 cm |
| Foldable | Yes |
| Adjustable Slope | Yes |
| Screen | Yes (LED Display) |
| With Speakers | No |
| Bluetooth Connection | No |
| With Vibration Mode | No |
| Heart Rate Test | Without (External contact pads may be available for pulse reading) |
| Training Site | Legs, Foot, Hip |
| Type of Sports | Cardio Training |
| Product Weight | 25.3 kg |
| Package Weight | 29 kg |
| Product Size (L x W x H) | 118 × 57 × 105.5 cm |
| Package Size (L x W x H) | 134 × 60 × 16 cm |
User Tips
Based on general user feedback for similar products:
- Utilize Incline: For effective fat burning and a more challenging workout without high impact, make use of the automatic incline feature. Incline walking can burn calories comparable to light jogging.
- Quiet Operation: The treadmill's ultra-quiet motor (<45 dB) makes it suitable for use in shared living spaces or during quiet hours without disturbing others.
- Space-Saving Storage: Take advantage of its foldable design to store the treadmill upright against a wall when not in use, maximizing your living or working space.
No specific user tips were available from provided reviews or Q&A for this product model.
Warranty and Support
For warranty information, technical support, or to report any issues with your ROBORE X8F Walking Pad Treadmill, please contact the seller or manufacturer directly. Keep your purchase receipt and product model number handy when contacting support.
General contact information for support (from the provided PDF, though for a spin bike, it might be a general support channel):
- North America: issue-help@outlook.com
- European Market: service_sports@163.com
A user manual PDF is available for reference, though its assembly section pertains to a spin bike: View User Manual (PDF).