Introduction
The Godox C100 Transparent Viewfinder Camera is designed for creators, lifestyle enthusiasts, and trendsetters. It merges vintage physical charm with modern digital utility, offering a unique screen-free connection to the world. This device functions as a camera with a built-in light meter for metering, taking photos, and recording videos.
This manual provides detailed instructions for the safe and effective use of your Godox C100 camera. Please read it thoroughly before operation and keep it for future reference.
Important Safety Instructions
DANGER
- This device contains a built-in lithium battery. Do not disassemble, strike, crush, or expose it to fire. If the battery becomes severely swollen, stop using the device immediately.
- Stop using immediately if the housing is cracked or deformed, if liquid enters the device, or if it emits a strange odor or becomes abnormally hot.
- Do not force the device to power off or disconnect it while inserting, removing, or transferring data to/from the TF card, as this may cause data corruption or memory card failure.
- Place the device in a well-ventilated area during use. Do not cover the device or place it on beds, blankets, or inside bags where heat dissipation may be blocked. Keep out of reach of infants and children. Children should use this device under adult supervision.
WARNING
- This device is NOT waterproof. Do not use in rain, high humidity, or dusty environments.
- If liquid enters the device or it becomes damp, disconnect the power immediately and remove all cables.
- Do not use near flammable or explosive gases or liquids.
- Do not block or obstruct the air vents to prevent overheating.
- Do not disassemble or modify the device without authorization. Unauthorized disassembly may result in circuit malfunction or permanent damage. Contact an authorized Godox service center for repairs.
What's Inside
Carefully check the package contents to ensure all items are present and undamaged. If anything is missing or damaged, contact your dealer immediately.
- Main Unit (Godox C100 Camera) x 1
- USB-C Cable x 1
Optional accessories (not included in all packages): Lanyard, Storage Bag, TF Card.

Names of Parts
Body

- Adjust Button (< / >)
- Shutter Button
- Select Button (O)
- Indicator Light
- Mode Switch
- Speaker
- Camera Lens
- Transparent Viewfinder
- Lanyard Hole
- Reset Hole
- USB-C Port
- TF Card Slot
Transparent Viewfinder Display

- Photo Mode Icon
- Video Mode Icon
- Metering Mode Icon
- Aspect Ratio Frame (16:9, 3:2, 4:3, 1:1)
- ISO Data
- Aperture Data
- Shutter Speed Data
- Battery Indicator
- Focus Frame
Installation & Preparation
Preparing for First Use (Check Battery Level)
The device is not fully charged from the factory. Fully charge it before first use:
- Connect the included USB-C cable to the USB-C port on the camera and to a power adapter (sold separately). Then plug the power adapter into a power source.
- During charging, the indicator light glows solid red. When charging is complete, the indicator light turns off.
Install the TF Card
This device has a built-in TF card slot and supports up to 128 GB TF cards.
- Insert the TF card in the direction indicated in the illustration.
- A click sound indicates the card is properly seated.

Mode Switching
Slide the mode switch to the corresponding position to switch between four modes:
| Mode | Description |
|---|---|
| Power On / Off |
|
| Photo Mode | The camera icon at the upper left indicates that Photo Mode is active. |
| Video Mode | The video icon at the upper left indicates that Video Mode is active. |
| Metering Mode | The metering icon at the top center, with ISO, aperture, and shutter speed at the bottom, indicates that Metering Mode is active. |
Note:
- Switching modes during video recording will stop the recording and save the file automatically.
- The maximum duration for a single video recording is 20 minutes. Recording will automatically stop and the file will be saved when the time limit is reached or the TF card is full.
Operation Guide
Photo Mode
- Slide the mode switch to the Photo Mode position.
- Press the < or > button to switch the aspect ratio.
- Press the shutter button to take a photo.

Video Mode
- Slide the mode switch to the Video Mode position.
- Press the < or > button to switch the aspect ratio.
- Press the shutter button to start or stop recording.
Aspect Ratios
In Photo Mode or Video Mode, press the < or > button to switch between four composition frames:
| Aspect Ratio | Description |
|---|---|
| 16:9 | Cinematic Widescreen: Ideal for landscapes and video. |
| 3:2 | Standard Film: Classic 35mm format. |
| 4:3 | Native Camera: Traditional digital sensor ratio. |
| 1:1 | Square: Perfect for social media. |
Metering Mode
- Slide the mode switch to the Metering Mode position.
- Aim at the subject. The device meters approximately 25% of the center area of the transparent viewfinder screen for exposure data.
- Press the O button to select the parameter for adjustment; the icon flashes to indicate the adjustable state. If no parameter was previously adjusted, ISO is selected by default.
- Press the < or > button to adjust the current parameter value. Press the shutter button to lock and save the metering parameters.

Metering Parameter Ranges:
| Parameter | Range |
|---|---|
| ISO | 100 - 800 |
| Aperture | f/1.0 - f/64 |
| Shutter Speed | 1/8000 - 1s |
Note:
- ISO can only be adjusted manually.
- Aperture and shutter speed are linked. When either parameter is adjusted manually, the device automatically calculates and matches the other in real time to maintain the current exposure value (EV).
- The device automatically exits adjustment mode after 5 seconds of inactivity.
Viewing Data
Connect the device to a phone or computer via the USB-C cable to view photos and videos. If the indicator keeps flashing, check that the TF card is properly inserted and recognized, and ensure the card is formatted to FAT32/exFAT (back up your data before formatting).
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on |
|
|
| No response when shooting / recording | TF card full | Delete unwanted files or replace the TF card |
| Abnormal screen display | Firmware exception | Contact official support |
| Indicator does not light up when charging | USB-C cable not properly connected | Check that both ends of the USB-C cable are fully inserted |
Technical Data
| Parameter | Value |
|---|---|
| Product Name | Godox Transparent Viewfinder Camera |
| Model | C100 |
| Transparent Viewfinder Transmittance | > 50% |
| Storage | Built-in TF card slot; supports up to 128 GB |
| Charging / Data Transfer | USB-C |
| Charging Input | 5V # 1A |
| Battery Life | > 1.5 h (continuous shooting) |
| Operating Temperature | 5 - 40℃ |
| Screen Dimensions | 60.8 × 47.8mm |
| Product Dimensions | 104.1 × 71.7 × 19.1mm |
| Net Weight (excluding TF card) | ≈ 65g |
Specifications and data may be subject to change without notice.
Maintenance
- Power off and disconnect the power supply before cleaning. Use a dry, soft cloth only. Strictly do not use alcohol, benzene, or other volatile solvents.
- To maintain battery health, perform a maintenance charge every 3 months during long-term storage. It is recommended to keep the battery level at 40% - 60%.
Warranty & Support
This warranty card is an important certificate for maintenance service. Please fill in the form provided by the seller and keep it safe.
Applicable Products
This document applies to the products listed in the Product Maintenance Information. Other products or accessories (e.g., promotional items, giveaways, and additional accessories attached) are not included in this warranty scope.
Warranty Period
The warranty period of products and accessories is calculated from the day of first purchase. The purchase date is considered as the date registered on the warranty card.
How to Get Maintenance Service
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call, and our service staff will assist you. When applying for maintenance service, you should provide a valid warranty card. If you cannot provide a valid warranty card, we may still offer maintenance service once confirmed that the product or accessory is within the maintenance scope, but this is not an obligation.
Inapplicable Cases for Warranty
The guarantee and service offered by this document are not applicable in the following cases:
- The product or accessory has exceeded its warranty period.
- Breakage or damage caused by inappropriate usage, maintenance, or preservation (e.g., improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contact with improper temperature, solvent, acid, base, flooding, and damp environments).
- Breakage or damage caused by non-authorized institution or staff during installation, maintenance, alteration, addition, and detachment.
- The original identifying information of the product or accessory is modified, altered, or removed.
- No valid warranty card.
- Breakage or damage caused by using illegally authorized, nonstandard, or non-publicly released software.
- Breakage or damage caused by force majeure or accident.
- Breakage or damage that could not be attributed to the product itself.
In such situations, you should seek solutions from the related responsible parties, and Godox assumes no responsibility. Damage caused by parts, accessories, and software beyond the warranty period or scope is not included in our maintenance scope. Normal discoloration, abrasion, and consumption are not considered breakage within the maintenance scope.
Maintenance and Service Support Information
The warranty period and service types of products are implemented according to the following Product Maintenance Information:
| Parts | Maintenance Period (month) | Warranty Service Type |
|---|---|---|
| Internal circuit board | 12 | Customer sends the product to designated site |
| Other items (cables, package, etc.) | N/A | Without warranty |
Godox After-sale Service Call: 0755-29609320-8062
Manufacturer: GODOX Photo Equipment Co., Ltd.
Address: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao'an District, Shenzhen 518103, China
Copyright © 2026 Godox All Rights Reserved. Made in China.
For more information on Declaration of Conformity, please visit: https://www.godox.com/eu-declaration-of-conformity/
A PDF version of this manual is available for download: User manual (PDF)