LAUNCH CR329

Contents

LAUNCH CR329 OBD2 Code Reader User Manual

Model: CR329

1. Introduction

The LAUNCH CR329 is an advanced DIY OBDII scanner designed to diagnose engine-related issues in vehicles. This tool allows users to read and clear fault codes, view live data, perform I/M readiness tests, and access various other diagnostic functions to help maintain vehicle health and troubleshoot problems efficiently.

2. Package Contents

Please check the package contents upon unboxing. If any items are missing or damaged, please contact your vendor.

  • LAUNCH CR329 OBD2 Code Reader Unit
  • Integrated OBD2 Diagnostic Cable (1.1m)
LAUNCH CR329 in retail packaging

Image: LAUNCH CR329 in its retail packaging.

3. Device Overview

The LAUNCH CR329 features a clear LCD screen, intuitive buttons, and LED indicators for easy operation.

LAUNCH CR329 Front View

Image: Front view of the LAUNCH CR329 with screen and buttons.

LAUNCH CR329 Back View

Image: Back view of the LAUNCH CR329 showing serial number and regulatory marks.

3.1. Buttons and Functions

  • F1 Button: Reads Fault Codes.
  • F2 Button: Clears Fault Codes.
  • F3 Button: Checks Readiness Status (I/M Readiness).
  • ESC Button: Returns to the previous screen.
  • OK Button: Confirms a selection or action from a menu list.
  • UP Button: Navigates up in menus or increases values.
  • DOWN Button: Navigates down in menus or decreases values.

3.2. Indicator Lights

  • Red Light: Indicates a fault code is present in the vehicle.
  • Yellow Light: Indicates the device is incompatible with the vehicle protocol.
  • Green Light: Indicates successful pairing between the device and the vehicle.

4. Setup and Connection

This scanner is designed to work with all OBD II compliant vehicles (9-16 volts).

  1. Turn the ignition off: Ensure your vehicle's ignition is in the OFF position.
  2. Locate the vehicle's 16-pin Data Link Connector (DLC): The DLC is usually located under the dashboard on the driver's side. Refer to your vehicle's service manual for exact location if needed.
  3. Connect the diagnostic cable: Plug the CR329's integrated OBD2 cable into the vehicle's DLC port. The device will power on automatically.
  4. Turn on the ignition: Turn your vehicle's ignition to the ON position (engine can be off or running). The CR329 is now ready for diagnostics.
Quick Start Guide Diagram

Image: Visual guide for connecting the CR329 to a vehicle's DLC port.

5. Operating Instructions

The LAUNCH CR329 provides a comprehensive set of OBDII diagnostic functions. Navigate through the menus using the UP/DOWN buttons and confirm selections with the OK button.

5.1. Core Diagnostic Functions

  • Read & Clear Engine Error Codes: Access stored Diagnostic Trouble Codes (DTCs) and clear them to turn off the 'Check Engine' Light (MIL).
  • Live Data / Freeze Frame: View real-time sensor data and a snapshot of vehicle conditions at the moment an emission-related fault occurred.
  • I/M Readiness: Check if the vehicle's emission-related systems are operating properly and are ready for inspection and maintenance testing.
  • VIN Code Reading: Automatically retrieves the Vehicle Identification Number from the car's ECU.
  • Hard (Memory) Codes Reading: Displays permanently stored fault codes.
  • Pending Codes Reading: Shows codes that have been detected but are not yet confirmed.
  • Oxygen Sensor Test: Retrieves and views O2 sensor monitor test results for recently performed tests.
  • On-Board Monitor Test: Allows viewing of results for on-board diagnostic system tests, useful after servicing or clearing ECU memory.
  • Vehicle Information: Displays VIN, Calibration Identification (CALID), and Calibration Verification Number (CVN).

5.2. Full OBDII Diagnostic Modes (10 Modes)

The CR329 supports all 10 modes of OBDII diagnostics for comprehensive vehicle analysis:

  1. Mode 01: Request current powertrain diagnostic data.
  2. Mode 02: Request freeze frame information.
  3. Mode 03: Request emissions-related diagnostic trouble codes.
  4. Mode 04: Clear/reset emissions-related diagnostic information.
  5. Mode 05: Request oxygen sensor monitoring test results.
  6. Mode 06: Request on-board monitoring test results for specific monitored systems.
  7. Mode 07: Request emission-related diagnostic trouble codes detected during current or last completed driving cycle.
  8. Mode 08: Request control of on-board system, test or component.
  9. Mode 09: Request vehicle information.
  10. Mode 0A: Request emissions-related diagnostic trouble codes with permanent status after a clear/reset emission-related diagnostic information service.

5.3. Additional Features

  • DTC Lookup Library: Built-in definitions for error codes, eliminating the need to search online.
  • Record & Replay: Records diagnostic data for later review.
  • HELP Shortcut Key: Provides quick tips for common issues.

6. Maintenance

6.1. Software Updates

The LAUNCH CR329 supports lifetime free updates via a computer to ensure compatibility with newer vehicles and improved functionality.

  1. Visit the official LAUNCH website to download and install the update tool (compatible with Windows XP, 7, 8, & 10).
  2. Connect the CR329 scanner to your computer using a USB cable.
  3. Register the scanner using its serial number within the update tool.
  4. Fill in any required information and click the 'Upgrade' button.

Note: Ensure a strong and stable internet connection during the update process.

6.2. Cleaning

Clean the device with a soft, damp cloth. Do not use abrasive cleaners or solvents. Keep the device dry and free from dust.

7. Troubleshooting

  • No Power: Ensure the OBD2 cable is securely connected to the vehicle's DLC. Check the vehicle's ignition status (must be ON).
  • Link Error: If the device displays a 'Link Error', verify the vehicle is OBDII compliant and the connection is secure. The yellow indicator light may also signal incompatibility.
  • Device Freezes: If the device freezes, disconnect it from the vehicle, wait a few seconds, and reconnect. If the issue persists, perform a software update.

For more detailed troubleshooting, please refer to the comprehensive user manual PDF available from the manufacturer.

8. Specifications

FeatureSpecification
Brand NameLAUNCH
Model NameLAUNCH CR329
Item TypeCode Readers & Scan Tools
Display Screen2.8 inch Color LCD
Resolution240*320 pixels
Storage32Mbit Flash
Operating Voltage12V
Operating Current42-64mA
Operating Temperature0~50°C (32~122°F)
Product Dimensions160*90*28 mm
Weight1.01 pounds (approx. 0.46 kg)
ConnectionOBD2 Plug 16 Pin Cable
Cable Length1.1m
Supported ProtocolsISO15765, ISO9141, ISO-14230, SAE J1850
Supported LanguagesEnglish, French, Spanish, German, Italian, Polish, Dutch, Portuguese, Russian, Japanese
Free UpdateLifetime Free Update
Battery IncludedYes (Internal, for memory/settings)
High-concerned chemicalNone
CR329 Specifications Table

Image: Comparison table highlighting CR329 specifications.

9. User Tips

No specific user tips were available from provided reviews or Q&A. Always ensure your vehicle's ignition is on when performing diagnostics, and refer to your vehicle's service manual for specific diagnostic procedures.

10. Warranty and Support

10.1. Warranty

The LAUNCH CR329 comes with a 2-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects but does not cover damage caused by misuse, accidents, or unauthorized modifications.

10.2. Technical Support

For technical assistance, software updates, or warranty inquiries, please visit the official LAUNCH website or contact their customer support. You can also refer to the detailed user manual PDF for more in-depth information: LAUNCH CR329 User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.