1. Introduction
This manual provides essential information for the safe and efficient operation of your HZTZ-A4DY Portable Thermal Printer. Please read all instructions carefully before use and retain this manual for future reference.
The HZTZ-A4DY is a compact and versatile thermal printer designed for various printing needs, including documents, images, and tattoo stencils. It supports wireless connection via Bluetooth for mobile devices (Android/iOS) and wired connection via USB for computers.
Manufacturer & EU Representative Information
- Manufacturer: Changsha Sematic E-commerce Co., Ltd.
- Address: CN-Xiangjiang North Road Cross-border E-commerce Industrial Park, 3rd Floor, Peking University Jade Bird Ketai Education, Yunzhongfu Holding Group Sematic Changsha Hunan Province, China
- EU Authorized Representative: EC REP SERVICES SL
- Address: ES-CALLE GRAN VIA 49, 7 DCH. Adra Almeria, Spain
2. Safety & Warnings
Read all instructions before use to ensure safety and prevent damage.
- WARNING: Keep this product and its small parts out of reach of children under 3 years old due to choking hazard.
- WARNING: Do not disassemble, modify or repair this product by yourself. Unauthorized modifications will void the warranty and may cause safety hazards.
- WARNING: Do not expose the product to water, moisture, extreme temperatures (below 0° C or above 40° C) or direct sunlight for long periods.
- WARNING: Stop using the product immediately if it shows signs of damage, cracking, overheating or malfunction.
- WARNING: Keep the product away from open flames, flammable materials and high-voltage sources.
- WARNING: Please use only the original charging cable and adapter. Do not overcharge the battery.
- WARNING: Wear protective gloves when installing sharp-edged parts.
3. Setup
3.1. Initial Preparation
- Remove all protective films and packaging materials from the product.
- Check that all parts are complete and undamaged.
- Ensure the printer is charged. Connect the provided charging cable to the printer and a suitable power adapter (DC 5V/1A).
3.2. Paper Installation
The printer supports A4 thermal paper with a width of up to 218mm. It can use both roll paper and folded paper.
3.3. Connectivity
The HZTZ-A4DY printer offers both Bluetooth and USB connectivity.
Bluetooth Connection (Mobile APP)
- Download the 'EasyPrint' app from your mobile app store (Android/iOS).
- Turn on the printer by long-pressing the power button for 2 seconds.
- Enable Bluetooth on your mobile device.
- Open the 'EasyPrint' app and search for the printer. Pair with the printer.
- Once connected, the blue indicator light on the printer will be solid.
USB Connection (PC)
- Download and install the printer driver from gzhtz.com/en/?case=105.htm.
- Connect the printer to your PC using a USB cable.
- Turn on the printer.
- Your computer should recognize the printer, and it will be ready for use.
4. Operating Instructions
4.1. Basic Operation
- Power On/Off: Long-press the power button for 2 seconds to turn the printer on or off.
- Print Connection QR Code: Short-press the power button twice to print a QR code for connecting to the device.
- Stop Printing: Single-click the power button to terminate printing.
4.2. Printing Documents and Images
The printer supports various document formats including Word, Excel, PDF, JPG, and TXT.
- Ensure the printer is connected to your mobile device via Bluetooth or PC via USB.
- Open the document or image you wish to print in the 'EasyPrint' app (for mobile) or your preferred application (for PC).
- Select the print option and choose the HZTZ-A4DY printer.
- Adjust print settings as needed (e.g., size, orientation).
- Initiate printing. The printer will automatically feed the thermal paper and print the content.
4.3. Using the Built-in Cutter
The printer features a built-in cutter for clean and neat paper tearing after printing.
5. Maintenance & Storage
5.1. Cleaning
- Turn off the device before cleaning.
- Use a soft, lint-free cloth to wipe the surface.
- Do not use harsh chemicals or abrasive cleaners.
- For the print head, it is recommended to clean it regularly with an alcohol swab. Gently wipe the print head when the machine is off to extend its lifespan.
5.2. Storage
- Store the printer in a dry place at room temperature (15°C - 35°C).
- Long-term Storage: If not used for a long time, charge the device to 50% every 3 months to maintain battery health.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Printer does not turn on | Low battery; Power button not pressed correctly. | Charge the printer. Long-press the power button for 2 seconds. |
| No print output / Blank pages | No thermal paper; Paper loaded incorrectly (non-thermal side up); Print head dirty. | Load thermal paper. Ensure thermal side faces the print head. Clean the print head. |
| Poor print quality | Low battery; Print head dirty; Low quality thermal paper. | Charge the printer. Clean the print head. Use high-quality thermal paper. |
| Bluetooth connection fails | Printer not in pairing mode; Bluetooth off on mobile; Interference. | Ensure printer is on and indicator is blue. Restart Bluetooth on mobile. Move closer to printer. |
| Printer not recognized by PC | Driver not installed; USB cable faulty; Printer not on. | Install the correct driver. Try a different USB cable. Ensure printer is powered on. |
| Red indicator light flashing | Low battery. | Charge the printer immediately. |
7. Technical Specifications
For actual data, please refer to the product detail page or contact customer service. The information here is for illustrative purposes only.
| Feature | Details |
|---|---|
| Product Model | A4DY Portable Thermal Printer |
| Printing Method | Direct Line Thermal Printing |
| Thermal Paper Type | A4 Thermal Paper (with cutting sealing line) |
| Product Dimensions (L x W x H) | 265mm x 80mm x 45mm |
| Max Paper Width | 218mm |
| Paper Thickness | 0.08 - 0.2mm |
| Printing Speed | 30mm/s (Max 25mm/s for some applications) |
| Resolution | 203dpi (8dot/mm) |
| Print Head Lifespan | 30km |
| Communication Interfaces | USB / Bluetooth |
| Power Supply | DC 5V/1A |
| Built-in Battery | 2600mAh Rechargeable Lithium Battery |
| Certifications | CE, UKCA, FC |
8. User Tips
- Always ensure you are using thermal paper. Regular paper will not work with this printer.
- For best print quality, keep the print head clean and avoid touching it with bare hands.
- If printing from a mobile device, ensure the 'EasyPrint' app is up-to-date for optimal performance.
- When printing multiple pages, ensure the paper is loaded correctly to prevent jams.
- To save battery, turn off the printer when not in use.
9. Warranty & Support
Unauthorized modifications will void the product warranty. For any issues or support, please contact the manufacturer or EU authorized representative using the contact information provided in the Introduction section.
You can also refer to the official product detail page for additional information or contact customer service.
A user manual in PDF format is available for download: User manual (PDF)
10. Disposal & Recycling
This symbol indicates that this product should not be treated as household waste. According to the WEEE Directive (2012/19/EU), it must be disposed of at an appropriate electronic waste collection point for recycling to prevent potential negative consequences for the environment and human health.
For packaging materials, please separate and dispose of them in the appropriate recycling bins.
11. Compliance Information
This product complies with the relevant EU legislation, including Machinery Regulation (EU) 2023/1230. This product bears the CE, UKCA and FC marks.