1. Introduction
Thank you for choosing the KLARUS HM5-V2 Headlamp. This ultra-thin, lightweight headlamp is designed for various activities such as night running, trail illumination, outdoor exploration, and emergency lighting. It features multiple light sources, flexible power options, and a comfortable design for extended wear. Please read this manual carefully before using the product to ensure proper operation and maintenance.
2. Package Contents
Please check the package for the following items:
- HM5-V2 Headlamp x1
- Micro USB Charging Cable x1
- Battery Housing + LB12 Li-ion Battery (1200mAh) x1
- User Manual x1

3. Product Overview
The KLARUS HM5-V2 features a split-type design for balanced weight distribution and multiple light sources for versatile illumination. Key components include:
- Lamp Head: Contains Spotlight, Floodlight, and Auxiliary Red Light LEDs.
- Dual Independent Switches: Separate buttons for Spotlight and Floodlight control.
- Battery Housing: Located at the rear, houses the rechargeable Li-ion battery or AAA batteries.
- USB-C Charging Port: For convenient recharging of the Li-ion battery.
- Adjustable Headband: High-elasticity, skin-friendly, and reflective for comfort and safety.


4. Setup
4.1. Battery Installation
The HM5-V2 offers three power supply options: the included 1200mAh Li-ion battery, 3x AAA batteries, or an external power bank.
- For Li-ion Battery: Open the rear battery housing cover. Insert the provided LB12 Li-ion battery into the housing, ensuring correct polarity (+/-). Close the cover securely.
- For AAA Batteries: Open the rear battery housing cover. Insert three AAA batteries, observing the correct polarity markings inside the compartment. Close the cover securely.

4.2. Charging the Li-ion Battery
To charge the included LB12 Li-ion battery:
- Locate the USB-C charging port on the battery housing.
- Connect the provided Micro USB charging cable to the port and plug the other end into a USB power source (e.g., computer, wall adapter).
- The battery level indicator will show charging status. It will typically turn solid when fully charged.

4.3. Headband Adjustment
The elastic headband is adjustable to fit various head sizes. Slide the buckles on either side of the headband to achieve a comfortable and secure fit. Ensure the headlamp is centered on your forehead.
5. Operating Instructions
The HM5-V2 features dual independent switches for intuitive control of its various lighting modes.

5.1. Power On/Off
- Spotlight: Press the Spotlight switch once to turn on. Press again to cycle through High > Medium > Low > Off.
- Floodlight: Press the Floodlight switch once to turn on. Press again to cycle through High > Medium > Low > Off.
5.2. Mode Switching
The HM5-V2 offers a variety of modes:
- Spotlight Modes: High, Medium, Low.
- Floodlight Modes: High, Medium, Low.
- Dual-Range Lamps: Turbo, High (achieved by activating both spotlight and floodlight).
- Auxiliary Light: Red Light, SOS, Beacon.
To access auxiliary modes (Red Light, SOS, Beacon), typically a long press on one of the switches (or a specific combination) is required. Refer to the quick guide on the product for exact activation sequences if not detailed here.

5.3. Electronic Locking Function
To prevent accidental activation and power drain, the headlamp features an electronic locking function. Typically, this is activated by a long press (e.g., 5 seconds) on both switches simultaneously when the light is off. Repeat the action to unlock. The light may flash to indicate lock/unlock status.
5.4. Memory Function
The headlamp features a memory function that recalls the last used brightness level for each light source (Spotlight/Floodlight) when turned back on, simplifying operation.
5.5. Battery Level Indicator
The integrated battery level indicator allows you to check remaining power at any time, helping you plan usage and charging schedules.
5.6. Adjustable Lamp Head
The lamp head can be adjusted up to 45 degrees to direct light precisely where needed, enhancing efficiency and reducing unnecessary illumination.

6. Maintenance
6.1. Cleaning
- Headband: The high-elasticity headband is replaceable and can be removed for cleaning. Hand wash with mild soap and water, then air dry completely.
- Lamp Unit: Wipe the lamp unit and battery housing with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Contacts: Periodically clean battery contacts with a clean cloth to ensure good electrical connection.
6.2. Storage
- If storing the headlamp for an extended period, remove all batteries to prevent leakage.
- Store in a cool, dry place away from direct sunlight and extreme temperatures.
7. Troubleshooting
If your KLARUS HM5-V2 Headlamp is not functioning as expected, please try the following:
- Light does not turn on:
- Check if the battery is installed correctly with the correct polarity.
- Ensure the battery is charged (for Li-ion) or replaced (for AAA).
- Check if the electronic lock function is activated. Unlock it if necessary.
- Clean battery contacts if they appear dirty.
- Light flickers or is dim:
- The battery may be low. Recharge or replace batteries.
- Ensure battery contacts are clean and making good connection.
If problems persist, please contact customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Model | HM5-V2 |
| Max Output | 800 Lumens (Turbo Combined Beam) |
| Beam Distance | Up to 99 Meters |
| Weight | Approx. 90g (without battery) |
| Power Source | 1x LB12 Li-ion (1200mAh, included), 3x AAA batteries, or external power bank |
| Water Resistance | IPX6 (Resistant to powerful water jets) |
| Drop Resistance | 1 Meter |
| Light Sources | White (Spotlight/Floodlight), Warm, Red (Auxiliary) |
| Lamp Head Adjustment | 45 Degrees |
| Material | Plastic |


9. User Tips
- Optimize Battery Life: Use lower brightness settings when maximum illumination is not required to extend battery runtime.
- Carry Spares: For long trips, always carry spare AAA batteries or a fully charged power bank as a backup.
- Secure Fit: Adjust the headband for a snug fit to prevent the headlamp from bouncing during dynamic activities like running.
- Flicker-Free Use: The HM5-V2 provides a stable, flicker-free light source to reduce visual fatigue during prolonged use.

10. Warranty and Support
KLARUS products are manufactured to high-quality standards. For warranty information and customer support, please refer to the official KLARUS website or contact your authorized dealer. Keep your purchase receipt as proof of purchase.