SpeedyBee Mario MiniX Series

Contents

SpeedyBee Mario MiniX Series CNC Frame Kit

User Manual

1. Introduction

The SpeedyBee Mario MiniX Series CNC Frame Kit is a modular, high-performance frame designed for FPV drones. It offers a lightweight and intelligent flight experience, with all models weighing under 250g. Constructed from aerospace-grade CNC and T700 carbon fiber, it ensures durability and robust performance for various flight environments. This frame is compatible with configurations including the O4 Air Unit and BeeStorm 1505 motors, providing versatility for advanced users.

2. Package Contents

The contents of your Mario MiniX Power Kit may vary slightly depending on the specific model (e.g., Mini3, Mini25 Pro, Mini3 Pro, Mini35 Pro, Mini4 Pro). Please refer to the image below for a general overview of included components. Note that the Power Kit does not include the shell as a standard component.

Mario Mini3 Power Kit Contents

Figure 2.1: Example of Mario Mini3 Power Kit Contents

Common components typically include:

  • Mario Mini X Battery Strap (e.g., 170*15mm)
  • Mario Mini X 5.8G Antenna
  • H1.5 Hex Screwdriver
  • DJI SH1.0 6P Dual-Head 55mm Ribbon Cable
  • GPS SH1.0 6P Single-Head 60mm Ribbon Cable
  • 12x12 GPS Mounting Double-Sided Tape
  • M2x4 Hex Socket Screws (for Camera/VTX)
  • M2x6 Hex Socket Screws (for Propellers)
  • M2x9 Hex Socket Screws (for Antenna Mount)
  • Mario Mini X Shell Safety Clips
  • O4 Air Unit Pro Antenna Mount
  • Propellers (model varies by kit, e.g., HQProp T3.2X2.9X3, HQProp RT2.5X2.1X3, GEMFAN 3630-3, HQProp T4X2X3)

3. Setup and Assembly

3.1 Frame Assembly

The Mario MiniX series features an innovative modular architecture with a patented snap-fit connection. This design integrates with the power frame, enabling a 3-second tool-free release for quick assembly and disassembly. The VTX module is compatible with multiple drone models, simplifying the build process.

Modular Architecture

Figure 3.1: Modular Architecture for Easy Assembly

3.2 VTX Module Installation

The Quick-Release VTX Module is designed for easy integration. It is compatible with O4 Air Unit, O4 Air Unit Wide-Angle, and O4 Air Unit Pro. The VTX module kit comes pre-installed with a prismatic transparent shell. An additional random bonus shell is included, with its color and logo style randomly assigned.

Quick-Release VTX Module

Figure 3.2: Quick-Release VTX Module

3.3 AIO Stack Installation

The F435 one-piece AIO (All-In-One) stack features an integrated design, incorporating Bluetooth tuning, an ELRS 2.4G receiver, XT30 connector, buzzer, capacitor, and LED. Its fully socketed interfaces make installation and maintenance straightforward.

Integrated AIO Stack

Figure 3.3: Extreme Integrated AIO Stack

3.4 Motor Installation

Install the Bee Storm 1505 brushless motors onto the frame arms. For enhanced protection and heat dissipation, optional interlocking CNC alloy heat-dissipation protectors are available and designed specifically for Bee Storm 1505 motors.

Bee Storm 1505 Motor

Figure 3.4: Bee Storm 1505 Motor with Optional Protection

3.5 GPS Module and Antennas

The frame includes a reserved GPS mounting space for an optional 12x12mm GPS module. The O4 Air Unit Pro features built-in dual inverted 60° antennas for stable flight. For ELRS systems, a front-mounted T-Type antenna minimizes signal blockage during freestyle flights.

GPS and Antenna Setup

Figure 3.5: GPS Mounting Space and Antenna Configuration

3.6 Battery Strap and Power Connector

Secure your battery using the provided Mario Mini X Battery Strap (170*15mm). The frame utilizes a lantern-slot XT30 connector, which is more durable than standard sleeve-type connectors, supports more plug cycles, and reduces the risk of sudden power loss.

4. Operating Instructions

4.1 Remote ID (FAA Standards)

The Mario MiniX comes standard with an F435AIO built-in wireless module that supports the broadcast function for Remote ID (RID). To utilize this feature, a GPS module is required. RID information can be searched and parsed using official apps like OpenDroneID (Android) and Drone Scanner (iOS). Ensure you pay attention to recent firmware updates for optimal functionality.

Remote ID Feature

Figure 4.1: Remote ID Functionality

4.2 VTX Features and Cooling

The O4 Air Unit Pro VTX is equipped with a 1/1.3-inch image sensor, delivering 4K output. It supports up to a 15 km transmission range with a minimum latency of 15 ms, providing smooth and responsive live video. The 155° ultra-wide field of view offers immersive low-altitude flight visuals. An optional O4 Air Unit CNC cooling module can extend full-power standby time by up to 3x and allows direct Type-C access for convenience.

VTX Features

Figure 4.2: O4 Air Unit Pro VTX Capabilities

4.3 Tuning

The AIO stack supports tuning via the SpeedyBee App, allowing for convenient adjustments and configuration of your drone's flight parameters.

5. Maintenance

  • Cleaning: Regularly clean all components, especially motors and electronics, to keep them free from dust, dirt, and debris. Use compressed air or a soft brush.
  • Inspection: Before and after each flight, visually inspect the frame for any cracks or damage. Check all screws for tightness and ensure all connections (motor, VTX, battery) are secure.
  • Firmware Updates: Periodically check for and apply firmware updates for your AIO stack and VTX, especially for features like Remote ID, to ensure optimal performance and compliance.
  • Propeller Check: Inspect propellers for any nicks, cracks, or bends. Replace damaged propellers immediately to maintain flight stability and safety.

6. Troubleshooting

  • No Power: Ensure the battery is fully charged and properly connected to the XT30 connector. Check the XT30 connector for any damage or loose pins.
  • No Video Feed: Verify that the VTX module is correctly installed and securely connected. Check the VTX antenna for damage or improper connection. Ensure your FPV goggles/receiver are on the correct frequency.
  • Remote ID Issues: Confirm that a GPS module is installed and properly connected. Ensure your AIO stack firmware is up-to-date. Use the official OpenDroneID or Drone Scanner apps for verification.
  • Flight Instability: Check that all propellers are correctly installed and undamaged. Verify that motors are securely mounted and spinning freely. Ensure the AIO stack is properly mounted and isolated from vibrations.
  • Motor Not Spinning: Check motor wiring connections to the ESC. Inspect motors for any physical obstructions or damage.

7. Specifications

7.1 General Specifications

  • Brand Name: SpeedyBee (HawkSpeed)
  • Material: Composite Material (Aerospace-grade CNC and T700 Carbon Fiber)
  • For Vehicle Type: Airplanes
  • Recommend Age: 14+ years
  • Use: Vehicles & Remote Control Toys
  • Tool Supplies: Assembled class
  • Four-wheel Drive Attributes: Assemblage
  • RC Parts & Accs: Accessories
  • Upgrade Parts/Accessories: Accessories
  • Remote Control Peripherals/Devices: Accessories
  • Is Electric: No battery
  • Is Batteries Included: No
  • Quantity: 1 pcs

7.2 Shared Hardware Parameters

Shared Hardware Parameters

Figure 7.1: Shared Hardware Parameters

ParameterValue
FrameMario Mini X / Mini25 / Mini3
AIO MCUAT32 F435
ESC25A 4 in1 32bit (OX32)
GyroscopeICM-42688-P
ReceiverBuilt-in ELRS 2.4G
BluetoothTuning via SpeedyBee App
OSD (Analog VTX)None
Blackbox8MB
Input Voltage3-4S LiPo/LiHv
Battery ConnectorAmass XT30ULW-F Type A
Battery Size≤ L60mm * W30mm * H30mm
GPS Supported Size12mm*12mm
Pin InterfacesSH 1.0 (6P DJI、6P GPS、3P BF LED and 3P S LED)
Adjustable Camera AngleO4 Air Unit Pro, adjustable 10—30°
Lens Mount Width<20mm

7.3 Configuration Differences

Configuration Differences Part 1

Figure 7.2: Configuration Differences (Mario Mini 25, Mini 25 Pro, Mini 3)

Configuration Differences Part 2

Figure 7.3: Configuration Differences (Mario Mini 3 Pro, Mini 35 Pro, Mini 4 Pro)

ParameterMario Mini 25Mario Mini 25 ProMario Mini 3Mario Mini 3 ProMario Mini 35 ProMario Mini 4 Pro
WheelbaseXH/125mmXH/135mmXH/135mmXH/135mmXH/155mmDC/183mm
Frame MaterialInjection-molded7075 / T700Injection-molded7075 / T7007075 / T7007075 / T700
Motor1303.5 6660kv1303.5 6660kv1505 4000kv1505 4000kv1505 4000kv1505 4000kv
Weight84g ±2g110g ±2g113g ±2g126g ±2g132g ±2g135g ±2g
Prop InterferenceNo InterferenceNo InterferenceMinimalMinimal InterferenceModerate InterferenceNo Interference
Propeller ModelHQProp RT2.5X2.1X3HQProp RT2.5X2.1X3HQProp T3.2X2.9X3HQProp T3.2X2.9X3GEMFAN 3630-3HQProp T4X2X3
Battery3S 650mAh3S 650mAh4S 680-880mAh4S 650-880mAh4S 650-880mAh4S 650-880mAh
Max Flight Time8min/3S 650mAh7min/3S 650mAh11min/4S 850mAh10.5min/4S 850mAh12min/4S 850mAh15min/4S 850mAh
Propeller guardOptional✗✗✗✗✗
Motor ProtectionIncluded✗IncludedOptionalOptionalOptional
Flying AreaSmall AreaSmall AreaMedium AreaMedium AreaLarge AreaLarge Area

8. User Tips

Based on available user feedback, there are no specific operational tips or tricks provided. Users have noted positive experiences with delivery and receiving all ordered components.

9. Warranty and Support

For any warranty claims, technical support, or inquiries regarding your SpeedyBee Mario MiniX Series CNC Frame Kit, please contact the seller or manufacturer directly through your purchase platform. Keep your proof of purchase handy for faster service.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.