DOOGEE Wild Boom Pro Portable Wireless Speaker User Manual

1. Introduction

Thank you for choosing the DOOGEE Wild Boom Pro Portable Wireless Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker to ensure optimal performance and longevity. Please read this manual carefully before use.

2. Package Contents

Please check the box for the following items:

Image: Contents of the product package, including speaker, cables, and manual.

• DOOGEE Wild Boom Pro Wireless Speaker
• USB-C Charging Cable
• 3.5mm Audio Cable
• Detachable Shoulder Strap
• User Guide (this document)
• Warranty Card

3. Device Overview and Controls

Familiarize yourself with the speaker's buttons and ports:

Image: Top and rear view diagrams of the speaker highlighting control buttons and ports.

4. Setup and Installation

4.1. Charging the Speaker

Before first use, fully charge the speaker. Connect the USB-C charging cable to the speaker's Type-C port and a power source.

Image: Speaker connected to a power source via Type-C cable for charging.

• Being Charged: The LED indicator turns solid red.
• Fully Charged: The LED indicator turns off.
• Low Battery Reminder: When the battery level is lower than 20%, the speaker will emit a voice prompt.

4.2. Attaching the Shoulder Strap

The detachable shoulder strap allows for easy portability.

Image: Step-by-step diagram showing how to thread and secure the shoulder strap to the speaker's top corners.

Thread the shoulder strap through the holes at the top left and top right corners of the speaker and secure it.

5. Operating Instructions

5.1. Power On/Off

Image: Diagram showing pressing the power button for 2 seconds to turn on/off.

• Power On: Press and hold the Power Button for 2 seconds. The blue light will turn on.
• Power Off: Press and hold the Power Button for 2 seconds. The light will turn off.
• Note: If no device is connected to the speaker within 10 minutes of being powered on, the speaker will automatically power off.

5.2. Bluetooth Pairing

Image: Diagram showing a phone's Bluetooth settings connecting to the speaker.

1. Press and hold the speaker's Power Button for 2 seconds to turn it on.
2. Turn on Bluetooth on your phone or device and search for available devices.
3. Select "Doogee Wild Boom Pro" from the list to connect.

Bluetooth Indicator:

• Rapidly Flashing Blue Light: Bluetooth is in pairing mode.
• Blue Light Constantly On: Bluetooth is connected.

To Disconnect Bluetooth:

• Method 1: Turn off Bluetooth on your cell phone or computer.
• Method 2: Long press the "Mode Switch Button" for 3 seconds. The speaker will automatically cut off the Bluetooth signal with the connected device. (Note: Bluetooth cannot be disconnected during call mode.)

5.3. TWS (True Wireless Stereo) Mode

Connect two DOOGEE Wild Boom Pro speakers for a stereo sound experience.

Image: Two speakers shown pairing wirelessly, with one connected to a phone.

1. Ensure Speaker 1 is connected to your mobile phone and Speaker 2 is powered on and in pairing mode.
2. Double-press the "TWS Button" on both Speaker 1 and Speaker 2. TWS pairing will be successful.

TWS Disconnection: Double-press the "TWS Button" on either speaker to disconnect TWS.

Note: TWS Mode for USB Drive / TF Card supports MP3 audio format only. If both speakers are turned on simultaneously again, they cannot perform TWS pairing automatically.

5.4. Dual Device Connection

Connect the speaker to two Bluetooth devices simultaneously.

Image: Two phones shown connecting to the speaker sequentially via Bluetooth.

1. On the first device, open the Bluetooth pairing list, connect the speaker, and complete pairing.
2. Press and hold the "Mode Switch Button" on the speaker for 3 seconds to disconnect the Bluetooth connection and enter pairing mode.
3. On the second device, open the Bluetooth pairing list, connect the speaker, and complete pairing.
4. On the first device, reopen the Bluetooth pairing list, manually click to reconnect the speaker, and complete pairing.

5.5. Mode Switching (USB / TF Card / AUX)

The speaker supports multiple audio input sources.

Image: Diagram highlighting USB, TF Card, and AUX ports for mode switching.

Click the "Mode Switch Button" to cycle between Bluetooth, TF Card, USB Drive, and AUX modes.

• USB Mode: Insert a USB drive to enter USB mode.
• AUX Mode: Insert a 3.5mm AUX cable to enter AUX mode.
• TF Card Mode: Insert a TF card to enter TF card mode.

Notes:

• When a TF card, USB flash drive, or AUX audio cable is inserted, the device will automatically power off after 20 minutes of no audio input.
• Mode Memory: Upon startup, the device defaults to Bluetooth mode; however, if a USB drive, TF card, or AUX cable was inserted, the speaker will power on and resume the mode that was active during the previous session.
• In USB Drive/TF Card mode, the speaker supports MP3, WAV, WMA, APE, and FLAC audio formats.

5.6. EQ Mode

Adjust the sound profile for different environments.

Image: Diagram showing the EQ button and indicators for Indoor/Outdoor modes.

Click the "EQ Button" to switch between modes:

• Indoor Mode: Sound quality leans towards mid-low frequencies. (Click EQ button, light off)
• Outdoor Mode: Sound quality leans towards mid-high frequencies. (Click EQ button, white light on)

Memory Function: The device has a memory function; the last EQ mode used will be saved as the default upon next power-on.

5.7. Lighting Modes: RGB & Stage Light

Enhance your listening experience with dynamic lighting effects.

Image: Visual representation of different lighting modes including Running Horse, Rhythm, Breathing, Fast Flash, Gradient, Solid Blue, Slow Flash, Flash Mob, and Always On.

Switch Stage Lighting Effects (Power On): Single click the dedicated lighting button.

Switch RGB Lighting Effects (Power On): Double click the dedicated lighting button.

Available Lighting Effects:

• RGB Party Lights: Chasing, Beat Sync, Gradient, Breathing, Strobe, Solid Blue.
• White Stage Lighting: Slow Flash, Fast Flash, Always On, Off.

5.8. Button Operation Summary

6. Maintenance

6.1. Routine Maintenance

• To extend battery life, fully charge the battery at least every three months. Battery life will vary depending on usage and environmental conditions.
• Do not expose the speaker to liquids while the charging cable is plugged in.
• Do not expose the speaker to water while charging, as this may cause permanent damage to the speaker or power supply.
• If liquid spills onto the speaker, do not charge it until the speaker is completely dry and clean. Charging while wet may damage the speaker.
• Always unplug the device before cleaning it.
• Clean the speaker with a soft, dry cloth only. Never use solvents.
• Attention should be drawn to the environmental aspects of battery disposal.
• The battery (batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire, or the like.

6.2. Care and Safety

This logo indicates the prohibition of naked flame sources, such as a lighted candle, on or near the device.

• Electrical and electronic equipment are part of a separate collection. Do not dispose of electrical or electronic equipment with unsorted municipal waste. Ensure it is collected separately. Collection systems and locations (sorting centers, rubbish dumps) are provided by local councils and retailers. By entrusting your end-of-life product to the proper recycling process, you are helping to protect the environment and your health.
• Use the product in temperate climates only.
• The product may be used by children aged 12 years or older and by those with reduced physical, sensory, or mental abilities, or those lacking experience or knowledge, provided they are correctly supervised, or if the instructions related to the use of the device have been adequately given and if the risks involved have been understood. Children must not play with this device. Children should not clean or maintain the product without supervision.

7. Troubleshooting

7.1. Restore Factory Settings

Image: Diagram indicating to long-press the Mode Switch Button for 5 seconds to restore factory settings.

While powered on, long-press the "Mode Switch Button" for 5 seconds to restore factory settings.

7.2. Force Shutdown/Reset

Image: Diagram indicating to long-press the Power Button and Mode Switch Button simultaneously for 2 seconds for force shutdown.

If the device freezes, simultaneously long-press the Power Button and the Mode Switch Button for 2 seconds.

8. Specifications

9. User Tips

• Optimize Battery Life: To maximize playtime, consider turning off the RGB lights when not needed, especially during longer listening sessions.
• Sound Customization: Experiment with both Indoor and Outdoor EQ modes to find the best sound profile for your environment and music genre.
• Emergency Power Bank: Utilize the USB port to charge your phone or other small devices on the go, making the speaker a versatile outdoor companion.
• Waterproof Seal: Always ensure the rubber cover on the back of the speaker is properly sealed to maintain its IP55 waterproof and dustproof rating, especially near water or dusty environments.
• TWS Placement: For the best True Wireless Stereo experience, place the two speakers within optimal range of each other and your primary device, ideally with no obstructions.

10. Regulatory Information and Support

10.1. FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

10.2. EC Declaration

This product complies with the below listed UK Directives:

• Radio Equipment Regulations 2017
• The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
• The Batteries and Accumulators (Placing on the Market) Regulations 2008 (as amended)
• The Waste Batteries and Accumulators Regulations 2009 (as amended)

10.3. Additional Resources

A PDF version of this user manual is available for download. You can access it via the following link: DOOGEE Wild Boom Pro User Manual (PDF)