1. Introduction
The Rapoo VT7/VT7s Air MAX V2 is a high-performance wireless gaming mouse designed for competitive gaming. It features a PixArt 3955 Ultimate high-precision sensor, NORDIC 54LM20 dual main control, and supports polling rates up to 8000Hz for ultra-low latency. Available in two sizes, VT7 Air MAX V2 for medium-large hands and VT7s Air MAX V2 for small-medium hands, both models offer a skin-friendly anti-slip coating, an embedded keel structure for stability, and versatile grip support. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your Rapoo VT7/VT7s Air MAX V2 gaming mouse.
2. Setup
2.1. Unboxing and Initial Inspection
Carefully remove all packaging materials. Keep plastic bags away from children. Inspect the mouse and its accessories for any damage before first use.
2.2. Package Contents
The package typically includes:
- Rapoo VT7/VT7s Air MAX V2 Gaming Mouse
- USB-C Data Cable
- 8K Receiver
- USB Adapter
- Anti-slip Stickers
- Mouse Feet

2.3. Connecting the Mouse
Your Rapoo VT7/VT7s Air MAX V2 mouse supports both wired and 2.4Ghz wireless connectivity.
2.3.1. Wireless Connection (2.4Ghz)
- Locate the 8K receiver and the USB adapter.
- Insert the 8K receiver into the USB adapter.
- Plug the USB adapter into an available USB port on your computer.
- The mouse should automatically connect. If not, ensure the mouse is powered on.

2.3.2. Wired Connection
- Connect one end of the provided USB-C data cable to the mouse.
- Connect the other end of the USB-C data cable to an available USB port on your computer.
- The mouse will function in wired mode and charge simultaneously.
2.4. Charging the Mouse
The mouse is equipped with a 300mAh lithium battery. It supports wired charging via the USB-C cable, wireless charging, and contact charging (if compatible accessories are used).
- Wired Charging: Connect the USB-C cable to the mouse and your computer/charger.
- Quick Charge: A 1-minute charge can provide approximately 6.5 hours of use.



2.5. Driver Installation (A Hub)
For full customization and optimal performance, download and install the Rapoo A Hub driver. This driver supports both Windows and macOS platforms and allows for automatic profile switching based on the application in use.

3. Operating the Mouse
3.1. Power On/Off
Locate the power switch on the underside of the mouse to turn it on or off.
3.2. DPI Adjustment
The mouse offers a wide DPI range from 1 to 60000, adjustable in 1 DPI steps. Use the dedicated DPI buttons (DPI+ / DPI-) to cycle through sensitivity levels. An indicator light will show the current DPI setting.

3.3. Polling Rate Adjustment
The mouse supports adjustable polling rates of 1000Hz, 2000Hz, 4000Hz, and 8000Hz. This can typically be adjusted via the Rapoo A Hub software or a dedicated button on the mouse. Higher polling rates provide faster response times.


3.4. Button Customization
The VT7 Air MAX V2 features 10 multi-function buttons, while the VT7s Air MAX V2 has 8. These buttons can be customized using the Rapoo A Hub software to assign macros, shortcuts, or other functions.

3.5. Mode Switching
The mouse supports 6 different modes that can automatically switch based on the application you are using, optimizing performance for various scenarios (e.g., gaming, office work). These modes can be configured via the Rapoo A Hub software.

3.6. Battery Level Indicator
The mouse features a battery level indicator to show the remaining charge. This is typically displayed via an LED on the mouse or within the Rapoo A Hub software.

4. Maintenance
4.1. Cleaning
To maintain the skin-friendly anti-slip coating and overall cleanliness, gently wipe the mouse with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that could damage the surface or internal components.
4.2. Storage
When not in use, store the mouse in a cool, dry place away from direct sunlight, extreme temperatures, and moisture. Keeping it in its original packaging or a protective case can help preserve its condition.
5. Troubleshooting
If you encounter any issues with your Rapoo VT7/VT7s Air MAX V2 gaming mouse, please try the following:
- Mouse not responding: Ensure the mouse is powered on and fully charged. For wireless connection, check if the 8K receiver is properly plugged into the computer. Try connecting the mouse via the USB-C cable to rule out battery or wireless connection issues.
- Lag or erratic movement: Ensure the 8K receiver is not obstructed and is close to the mouse. Check for potential interference from other wireless devices. Update the mouse firmware via the Rapoo A Hub software.
- Buttons not working: Verify button assignments in the Rapoo A Hub software. Ensure the software is up to date.
- Software issues: Reinstall the Rapoo A Hub software. Ensure your operating system is up to date.
For further assistance, please refer to the official Rapoo support resources or contact customer service.
6. Specifications
| Feature | VT7 Air MAX V2 | VT7s Air MAX V2 |
|---|---|---|
| Product Name | VT7 Air MAX V2 | VT7s Air MAX V2 |
| Weight | Approx. 49±2g | Approx. 46±2g |
| Hand Size | Medium–Large | Small–Medium |
| Grip | Versatile, supports all grip styles | Versatile, supports all grip styles |
| Color | Mist Blue (White variant also available) | Mist Blue (Purple variant also available) |
| Surface Finish | Skin‑friendly anti‑slip coating | Skin‑friendly anti‑slip coating |
| MCU | NORDIC 54LM20 | NORDIC 54LM20 |
| Sensor | PixArt 3955 Ultimate | PixArt 3955 Ultimate |
| Polling Rate | 1000Hz / 2000Hz / 4000Hz / 8000Hz | 1000Hz / 2000Hz / 4000Hz / 8000Hz |
| LOD (Lift-Off Distance) | 0.7–1.7mm, 11 adjustable steps (0.1mm precision) | 0.7–1.7mm, 11 adjustable steps (0.1mm precision) |
| DPI Sensitivity | 1–60000 DPI, adjustable in 1 DPI steps | 1–60000 DPI, adjustable in 1 DPI steps |
| Switches | 120 million clicks, Rapoo custom‑tuned optical switches | 120 million clicks, Rapoo custom‑tuned optical switches |
| Encoder | 2 million cycles, Rapoo custom‑tuned optical encoder | 2 million cycles, Rapoo custom‑tuned optical encoder |
| Quick Recharge | 1‑minute charge provides 6.5 hours of use | 1‑minute charge provides 6.5 hours of use |
| Battery Life (1000Hz) | Up to 275 hours | Up to 275 hours |
| Connection Method | Wired / 2.4Ghz Receiver | Wired / 2.4Ghz Receiver |
| Number of Buttons | 7 independent buttons + 1 scroll wheel (10 multi-function) | 5 independent buttons + 1 scroll wheel (8 multi-function) |
| Charging Interface | USB-C | USB-C |
| Cable Length | 1.8m | 1.8m |
| Receiver Dimensions | 19×13×5mm (with storage case) | 19×13×5mm (with storage case) |
| Receiver Weight | Approx. 1.6g | Approx. 1.6g |
| Dimensions (L×W×H) | 127×64×40mm | 119×62×39mm |


7. User Tips
- Optimize for Your Hand Size: Choose between the VT7 Air MAX V2 (medium-large hands) and VT7s Air MAX V2 (small-medium hands) for the most comfortable and effective grip.
- Leverage Quick Charge: If you're in a hurry, a quick 1-minute charge can give you 6.5 hours of gameplay, minimizing downtime.
- Customize with A Hub: Install the Rapoo A Hub software to unlock the full potential of your mouse, including button remapping, macro creation, and personalized profiles that switch automatically with your applications.
- Adjust Polling Rate for Performance: For competitive gaming, utilize the 8000Hz polling rate for the fastest response. For general use or to conserve battery, a lower polling rate like 1000Hz is sufficient.
- Maintain Grip: The skin-friendly anti-slip coating provides excellent grip. Keep it clean to ensure consistent performance.
8. Warranty and Support
For detailed warranty information and customer support, please refer to the official Rapoo website or the documentation provided with your product. You can also consult the comprehensive user manual in PDF format for additional information:
Manufacturer Information
Manufacturer Name: Yancheng Yucheng Network Technology Co., Ltd
Full Address: No. 4 Shop, Building 24, Chengxing Yang Huayuan, Sheyang County, Yancheng City, Jiangsu Province, China, Postal Code: 320924
Email: 15949872@qq.com
Phone number: 86-13713191609
EU Authorized Representative
Company name: MJCM SARL
Address: 78 avenue des Champs Elysees Bureau 326, PARIS, FR
Email: mjcm190928@gmail.com