NVIDIA Tesla T10

Contents

NVIDIA Tesla T10 16GB GDDR6 Graphics Card User Manual

High-Performance GPU for AI and Compute Workloads

Important Safety Information

Dear user, thank you for purchasing this product. Please open the packaging for use. Warning: Do not put the product on fire. Good luck!

Please read this manual thoroughly before installing and operating your NVIDIA Tesla T10 graphics card. Keep this manual for future reference.

1. Product Overview

The NVIDIA Tesla T10 is a high-performance graphics processing unit (GPU) designed for demanding AI, deep learning, and high-performance computing (HPC) workloads. Featuring the TU102 GPU architecture with 3584 CUDA cores and 16GB of GDDR6 memory, it delivers significant computational power for professional applications. Please note that this product is not brand new (used/refurbished).

NVIDIA Tesla T10 Graphics Card Top View
Figure 1: Top view of the NVIDIA Tesla T10 graphics card.

2. Setup and Installation

2.1 Unpacking

  1. Carefully open the product packaging.
  2. Remove the graphics card from its anti-static bag. Handle the card by its edges to avoid touching the gold PCIe connector or other components.
  3. Inspect the card for any visible damage. If damage is found, contact your vendor immediately.
NVIDIA Tesla T10 Graphics Card in Packaging
Figure 2: NVIDIA Tesla T10 graphics card in its anti-static packaging.

2.2 Hardware Installation

Before proceeding, ensure your computer is powered off and unplugged from the wall outlet. Wear an anti-static wrist strap if available.

  1. Open your computer case.
  2. Locate an available PCI Express x16 slot on your motherboard.
  3. Remove any expansion slot covers that correspond to the chosen PCIe slot.
  4. Align the Tesla T10 card with the PCIe slot and press down firmly until it is securely seated. Ensure the retention clip on the PCIe slot locks into place.
  5. Secure the graphics card to the computer case with the appropriate screw(s).
  6. Connect the necessary PCIe power cables from your power supply unit (PSU) to the power connectors on the Tesla T10. The Tesla T10 typically requires one 8-pin PCIe power connector. Ensure all power connectors are fully seated.
  7. Close your computer case.
NVIDIA Tesla T10 Graphics Card Power Connector End
Figure 3: End view of the Tesla T10 showing the power connector area.

2.3 Driver Installation

  1. Connect your display to your motherboard's integrated graphics output (if available) or a basic graphics card if the Tesla T10 does not provide display output (Tesla cards are primarily compute cards and may not have display ports).
  2. Power on your computer.
  3. Download the latest NVIDIA drivers for the Tesla T10 from the official NVIDIA website (nvidia.com/drivers). Select 'Tesla' as the product type and 'Tesla T10' (or equivalent series) as the product.
  4. Run the downloaded driver installer and follow the on-screen instructions. A system restart may be required.
  5. After installation, you can verify the driver status using NVIDIA's control panel or command-line tools like nvidia-smi on Linux.

3. Operating the Tesla T10

The NVIDIA Tesla T10 is designed for compute-intensive tasks rather than traditional graphics rendering for display. It excels in:

  • Artificial Intelligence (AI) and Deep Learning: Training and inference with frameworks like TensorFlow, PyTorch, and MXNet.
  • High-Performance Computing (HPC): Scientific simulations, data analytics, and parallel processing.
  • Data Centers: Virtualization and cloud computing environments.

3.1 Monitoring GPU Status

You can monitor your GPU's performance, temperature, and utilization using various tools:

  • NVIDIA-SMI (System Management Interface): A command-line utility for Linux and Windows that provides real-time GPU statistics.
  • GPU-Z: A third-party utility for Windows that displays detailed information about your GPU and real-time sensor data.
Linux Terminal NVIDIA-SMI Output
Figure 4: Example nvidia-smi output showing GPU utilization, memory usage, and power consumption.
GPU-Z Sensor Data for Tesla T10
Figure 5: GPU-Z sensor data for NVIDIA Tesla T10, showing real-time clocks, temperatures, and power usage.

4. Maintenance

  • Driver Updates: Regularly check the NVIDIA website for the latest drivers to ensure optimal performance and compatibility.
  • Dust Cleaning: Periodically clean dust from the GPU's heatsink and cooling fins using compressed air. Ensure the system is powered off and unplugged before cleaning. Hold any fans in place to prevent over-spinning.
  • Airflow: Ensure your computer case has adequate airflow to prevent overheating, especially under heavy computational loads. Keep the area around your computer clear of obstructions.
  • Temperature Monitoring: Monitor GPU temperatures during heavy use. Sustained high temperatures can reduce the lifespan of the card.

5. Troubleshooting

5.1 Common Issues and Solutions

  • GPU Not Detected:
    • Ensure the card is fully seated in the PCIe slot.
    • Verify all PCIe power cables are securely connected.
    • Check your motherboard's BIOS/UEFI settings to ensure the correct PCIe slot is enabled or set to auto-detect.
    • Try the card in a different PCIe slot if available.
  • Driver Installation Issues:
    • Download the correct driver version for your operating system and GPU model from the NVIDIA website.
    • Uninstall any previous GPU drivers using Display Driver Uninstaller (DDU) in Safe Mode before attempting a fresh installation.
  • Performance Issues:
    • Ensure you have the latest drivers installed.
    • Monitor GPU temperature and utilization (using GPU-Z or nvidia-smi) to check for thermal throttling or unexpected low usage.
    • Verify your power supply unit (PSU) meets the minimum wattage requirements for your system, including the Tesla T10.
  • System Instability/Crashes:
    • Ensure your system's power supply is stable and sufficient.
    • Check for overheating.
    • Perform a clean driver installation.
    • Test system memory (RAM) for errors.

6. Specifications

FeatureSpecification
GPU ArchitectureNVIDIA Turing (TU102)
Manufacturing Process12 nm
CUDA Cores3584
Memory Size16 GB
Memory TypeGDDR6 (Samsung)
Memory Bus256-bit
Memory Bandwidth403.2 GB/s
GPU Clock (Base)1065 MHz
Memory Clock1575 MHz (Effective 12600 MHz)
Bus InterfacePCI Express 3.0 x16
Thermal Design Power (TDP)150 W
DirectX Support12 (12_2)
Technologies SupportedOpenCL, CUDA, DirectCompute, DirectML, Vulkan, Ray Tracing, PhysX, OpenGL
Package Dimensions (Approx.)Length: 20 cm, Width: 20 cm, Height: 20 cm
Package Weight (Approx.)1.2 kg
GPU-Z Detailed Specifications for Tesla T10
Figure 6: Detailed specifications of the NVIDIA Tesla T10 as reported by GPU-Z.

7. User Tips

  • Optimal Cooling: For sustained high-performance workloads, ensure your system has excellent cooling. Consider additional case fans or improved CPU cooling to maintain overall system temperature.
  • Power Supply: Always use a high-quality power supply unit (PSU) with sufficient wattage and stable power delivery to prevent system instability.
  • Software Environment: Keep your operating system and all AI/HPC frameworks (CUDA Toolkit, cuDNN, TensorFlow, PyTorch, etc.) updated to their latest stable versions for best compatibility and performance.
  • Resource Monitoring: Regularly use tools like nvidia-smi or GPU-Z to monitor your GPU's health, especially when running new or intensive tasks.

8. Warranty and Support

For warranty information, please refer to the terms and conditions provided by your original seller or retailer at the time of purchase. As this product is noted as not brand new, warranty terms may vary.

For technical support or further assistance, please contact your seller directly. You may also find additional information in the official user manual PDF available at: NVIDIA Tesla T10 User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.