Aoocci D6A

Contents

Aoocci D6A 6.1" Ultra-Wide Smart Display Screen User Manual

Model: D6A

1. Introduction

The Aoocci D6A is an advanced 6.1-inch ultra-wide smart display screen designed for motorcycles, integrating multiple safety and navigation features. It offers wireless CarPlay and Android Auto connectivity, a 2K dual dash cam, 77GHz radar for Blind Spot Detection (BSD), Tire Pressure Monitoring System (TPMS), and built-in GPS for navigation and route tracking. This manual provides essential information for the proper installation, operation, and maintenance of your D6A device.

Aoocci D6A display showing various features like BSD AI vision, TPMS, dual camera recording, and 10Hz GPS tracking.

Figure 1: Aoocci D6A All-in-One Features

2. Safety Precautions

Please read and adhere to the following safety guidelines to ensure safe operation and longevity of your Aoocci D6A device:

  1. Check all accessories before installation. No return after installation, but repair or discounted returns may be possible.
  2. Do not use a high-pressure water gun to flush the host and cameras. The product is only waterproof against rain.
  3. Do not use alcohol, stain removal solution, or other corrosive solvents to wipe the host and lens to avoid damaging the appearance or waterproofness of the product.
  4. Ensure all units are connected before turning on the power.
  5. Do not fold the cable lines during installation.

Special Attention:

  1. Please use a certified 8-256GB MICRO TF memory card with a CLASS 10 classification or above and format the memory card before first use.
  2. Long-term use of the memory card can cause fragmentation; it is recommended to format the memory card regularly.
  3. Press the rubber plugs firmly after inserting to ensure the waterproofness of the product.

3. Package Contents

The Aoocci D6A package includes the following components:

Diagram showing all components of the Aoocci D6A: D6A Display, TPMS Sensors, Handlebar Controller, Front & Rear Cameras, 10Hz GPS Module, BSD Radar Sensor, Power Cable, Aluminum Mount, USB Test Cable.

Figure 2: D6A Core Components

  • D6A Display (Host)
  • Front Camera
  • Rear Camera
  • TPMS Sensors (Front and Rear)
  • Handlebar Controller
  • 10Hz GPS Module
  • BSD Radar Sensor
  • Power Cable
  • Aluminum Mount
  • USB Test Cable
  • Wrenches/Reverse Screws
  • Camera Line
  • Hood/Screws
  • User Manual (PDF available for download)

4. Product Overview

The Aoocci D6A is designed to enhance your motorcycle riding experience with integrated smart features and safety systems.

Main Parts and Key Functions:

  • Host (Display Unit): 6.1-inch IPS touch screen. Features a host hood screw hole, memory card slot, and TYPE-C connector. Includes a power indicator and video indicator light.
  • Front & Rear Cameras: Record in 2K (front) and 1080P (rear) Full HD.
  • Wired Remote Control: For easy operation of various functions including loop recording and emergency lock. The G-sensor protects important footage.
  • Built-in GPS: For navigation and route tracking.
  • Dual Bluetooth: Allows connection to smartphones and Bluetooth-enabled headphones/helmets for hands-free calls and music.
  • TPMS (Tire Pressure Monitoring System): Real-time monitoring of tire pressure and temperature.
  • BSD (Blind Spot Detection) Radar: 77GHz radar for enhanced safety by detecting objects in blind spots.
  • IP67 Waterproof: Ensures durability and normal operation in various weather conditions.
Aoocci D6A display mounted on a motorcycle handlebar, showing the Blind Spot Safety System features like Wireless CarPlay, Android Auto, Touch Screen, and IPX7 Waterproofing.

Figure 3: Blind Spot Safety System with 2K Dual Dashcam & Wireless CarPlay

Diagram illustrating 77GHz Radar Blind Spot Detection with a motorcycle between two cars, showing a 12m detection range on each side and a 50m detection range behind.

Figure 4: 77GHz Radar Blind Spot Detection

Aoocci D6A display showing a CarPlay interface with phone apps, connected wirelessly to a smartphone.

Figure 5: Wireless CarPlay and Android Auto Interface

Aoocci D6A display showing split screen view of front (2K) and rear (1080P) camera footage.

Figure 6: 2K Front and 1080P Rear Dual Dash Cam

Aoocci D6A display showing tire pressure settings and two TPMS sensors (F and R) attached to tire valves.

Figure 7: Real-time Tire Pressure Monitoring

Aoocci D6A display mounted on a motorcycle handlebar in rainy conditions, highlighting its IP67 waterproof rating and 1000Nit brightness.

Figure 8: IP67 Waterproof Design

5. Setup & Installation

5.1. General Installation

The Aoocci D6A comes with a bracket kit and tools for easy installation on your motorcycle handlebars. Ensure the display is securely mounted and positioned for optimal visibility without obstructing your view of the road or controls.

Aoocci D6A display mounted on a motorcycle handlebar, showing the screen interface with navigation and vehicle data.

Figure 9: Display Mounted on Motorcycle Handlebars

5.2. Wiring Diagram and Connection Method

Follow the wiring diagram carefully to connect the D6A components to your motorcycle's power supply. The exact size and layout are based on the real product.

Wiring diagram for the Aoocci D6A, showing connections for power cable, rear lens, front lens, GPS, and the main host unit. Includes instructions for finding the ACC power line using a multimeter.

Figure 10: Connection Method Diagram

Finding the ACC Power Line:

  1. Set a multimeter to DC mode. Connect the black test lead to the negative battery pole and the red test lead to the test line.
  2. When the ACC (Accessory) is OFF, the multimeter should show no output (nothing). When the ACC is ON, the multimeter should show 12V voltage. This indicates you have found the ACC power line.
  3. If you haven't found the ACC line, repeatedly use the red test lead to probe different test lines (keeping the black test lead connected to the negative pole) until you find the ACC line.

5.3. TPMS Sensor Installation

To install the TPMS sensors:

  1. First, install the reverse lug nuts to the bottom of the tire valve.
  2. Screw on the TPMS sensor.
  3. Pair the sensors with the D6A display (refer to Section 6.4 for pairing instructions).
  4. After successful pairing, screw the reverse lug nuts back against the tire pressure sensors to prevent them from falling out.

If you need to re-inflate the tire, loosen the reverse nut first, then unscrew the sensor. After inflation, reattach the sensor and tighten the nut. The tire pressure should display successfully without re-pairing. If the value is not displayed immediately, it will appear after a certain distance of riding. If the value is still not displayed, follow the re-pairing steps. If the tire pressure display is inaccurate, check whether the sensor is installed correctly and if the air pressure unit of your inflation tool is consistent with the host settings.

6. Operating Instructions

6.1. Main Menu Screen

The main menu screen provides quick access to various functions. The LED reminder light indicates power and recording status:

  • Steady green light/flashing red light: Power supply is normal, and no memory card is detected.
  • Steady green light: Memory card is present, but no recording is active.
  • Flashing green light: Normal recording status.
Aoocci D6A main menu screen showing icons for Driving Recorder, Interconnect, Date/Time, Front/Back tire pressure, and Replay.

Figure 11: Main Menu Screen

6.2. CarPlay & Android Auto Connection

To connect your smartphone via CarPlay or Android Auto:

  1. Ensure both Bluetooth and Wi-Fi functions are enabled on your mobile phone.
  2. On the D6A home page, click the "Interconnect" window to enter the connection interface.
  3. Click the CarPlay or Android Auto icon again.
  4. For the first connection, manually connect to the D6A's Bluetooth (e.g., "MT91C-XXXX") from your phone's Bluetooth settings. The password is 12345678.
  5. Wait 5-10 seconds. When your phone's Wi-Fi is active, the CarPlay or Android Auto interface will automatically transmit to the D6A.
  6. Follow any additional prompts on your phone (e.g., "Allow when using APP" and "Allow to connect to local network" for iOS, or selecting "carplay car" for Android).
  7. Click the home button on the D6A to return to the main interface of the dash cam.

The D6A's Wi-Fi is used solely for connection and operation with the mobile phone APP, not for internet access.

Video 1: Demonstration of D6A features including CarPlay, GPS, and dash cam operation.

6.3. Driving Recorder Functions

From the main menu, click the Driving Recorder icon to access its interface. Key functions include:

  • Homepage: Return to the previous page.
  • Settings: Enter the recorder menu.
  • Playback: Return to the playback interface.
  • Recording: Turn on/off voice recording.
  • Lock: Lock/unlock front and rear camera pictures.
  • Take a photo: Capture a picture from both front and rear cameras simultaneously.
  • Video recording: Start/pause recording.
  • Display: Time/date, altitude, position, and speed.

Recorder Setup Menu:

Click the recorder interface setting button to enter the menu. Options include:

  • Resolution: Set video recording resolution.
  • Loop: Set 1/3/5 minute loop recording duration.
  • G-sensor: Adjust collision sensitivity settings.
  • Date: Enable/disable time watermark.
  • GPS switch: Control GPS signal.
  • Recording: Adjust video sound settings.
  • GPS speed: Enable/disable GPS speed record.
  • Compass: Display compass bearing.
  • Back: Rear lens mirror function.

6.4. Playback Interface

Press the playback icon on the recording interface to enter the playback interface. Here you can:

  • Go back to the previous screen.
  • Play videos.
  • View in full screen.
  • Lock/unlock videos.
  • Delete files.
  • Access regular video recordings, pictures, locked videos, and other video files.

6.5. Settings Menu

Click the settings icon to access the main settings screen. Options include:

  • Language: Select multiple languages.
  • Time setting: Set host time (updates automatically when connected to GPS/Wi-Fi/Bluetooth).
  • Phone audio: ON/OFF to control if mobile phone sound plays through the host.
  • Key Volume: ON/OFF for touch key tone.
  • Wi-Fi switch: ON/OFF (connection distance is 10 meters without obstruction).
  • Pressure: Pairing for tire pressure detection.
  • Screen saver: Set auto-lock time for the screen.
  • GPS info: Check GPS signal information.
  • Format SD: Format the memory card.
  • Reset: Reset the host.
  • Version: Check version/Bluetooth name/Wi-Fi name and password.

Tire Pressure Detection Interface:

Click the tire pressure icon to enter settings. Here you can:

  • Set tire pressure unit (Bar or Psi) and temperature unit (°C or °F).
  • Set air pressure alarm values (low and high).
  • Initiate sensor pairing (Front and Rear).

7. Maintenance

  • Memory Card Formatting: To prevent fragmentation and ensure optimal performance, it is recommended to format your MICRO TF memory card regularly. Access this option in the main settings menu under "Format SD".
  • Cleaning: Use a soft, dry cloth to clean the display and camera lenses. Avoid using harsh chemicals or abrasive materials.
  • Firmware Updates: Check the manufacturer's website or the companion app for any available firmware updates to ensure your device has the latest features and bug fixes.

8. Troubleshooting

Here are solutions to common issues you might encounter:

  1. How to disconnect CarPlay or Android Auto?
    Answer: Just turn off the Wi-Fi or forget the Bluetooth device on your phone.
  2. How do I reconnect to CarPlay/Android Auto after manually disconnecting it?
    Answer: Just reconnect to the dash cam through Bluetooth on your phone.
  3. How do I reconnect to CarPlay/Android Auto after restarting the dash cam?
    Answer: It will be connected back automatically when both Bluetooth and Wi-Fi are enabled on your phone.
  4. How to use the Kycam2 App when connected to CarPlay?
    Answer: Both can be operated simultaneously.

9. Specifications

The following table outlines the technical specifications of the Aoocci D6A:

FeatureSpecification
Screen Size6.1 inch IPS Ultra-wide
Resolution1152 x 578 (Display), 1520x720 (CarPlay screen)
BrightnessMax 1000 nits
Front Camera2K, 2560 x 1440 at 30fps
Rear Camera1080P at 30fps
Video EncodingH.264 / TS Stream
StorageMicroSD Card Class 10, 8-256GB
Phone InterfaceWireless Apple CarPlay / Android Auto
Blind Spot AlertsAI visual BSD compatible
TPMSTire Pressure Monitoring System included
GPSExternal 10Hz GPS Module
Wireless Connectivity2.4GHz / 5GHz Wi-Fi, Dual Bluetooth
Waterproof LevelIP67 (Host), IPX7 (Display)
Dimensions140 x 77 x 15 mm (5.51 x 3.03 x 0.59 in)
Weight0.3 kg (0.66 lb)
Handlebar Compatibility16-28 mm (0.63-1.10 in)
Operating Temperature-20°C to 70°C (-4°F to 158°F)
Built-in BatteryCoin cell batteries
Parking MonitorYes
Voltage Requirement12-30V to 5V 2A

10. User Tips

  • For optimal GPS accuracy, ensure the GPS module has a clear line of sight to the sky.
  • Regularly check the camera lenses for dirt or obstructions to ensure clear recording quality.
  • When using CarPlay or Android Auto, ensure your phone's battery is sufficiently charged or connected to a power source, as continuous use can drain battery quickly.
  • Adjust the screen brightness in settings for comfortable viewing in different lighting conditions.

11. Support

For further assistance or detailed information, please refer to the official user manual PDF available at: Aoocci D6A User Manual (PDF).

You can also visit the Aoocci website for product updates and customer support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.