1. Introduction
The Jonsbo TM-360E is an all-in-one (AIO) liquid CPU cooler featuring a 360mm radiator, ARGB lighting, and a 3.95-inch screen display on the cold head. This integrated liquid cooler is designed to provide efficient cooling for desktop-level CPUs while offering customizable visual feedback on system parameters.
This manual provides detailed instructions for the installation, operation, and maintenance of your Jonsbo TM-360E water-cooled radiator. Please read this manual thoroughly before installation and keep it for future reference.
Important Notice: If there are any discrepancies between the product standard parameters and the actual product due to product upgrades or other reasons, please refer to the actual product for accuracy.
2. Safety Information
- Ensure all components are handled with care to prevent damage.
- Disconnect power from your computer before installation.
- Wear anti-static gloves or ground yourself to prevent electrostatic discharge (ESD) damage to components.
- Do not open the liquid cooler unit; it contains liquid coolant under pressure.
- Keep out of reach of children.
- Refer to the official Jonsbo website or the full PDF user manual for comprehensive safety guidelines.
3. Package Contents
Verify that all items listed below are present in your package. For detailed visual identification, please refer to the diagrams in the official PDF user manual.
- CPU Cooler (Radiator with Fans and Pump/Cold Head)
- Screen Assembly
- Intel Backplate
- Mounting Bracket (D)
- AMD Spacers (E)
- Intel Spacers (F) (x4)
- Nuts (G) (x4)
- Thermal Paste (H)
- Case Screws (I) (240: x8, 360: x12)
- Cold Plate Mounting Screws (J) (x4)
- AMD Mounting Screws (K)
4. Installation Guide
This section provides step-by-step instructions for installing the Jonsbo TM-360E on both Intel and AMD platforms. For detailed diagrams and visual guidance, please refer to the official PDF user manual available at Jonsbo TM-360E User Manual (PDF).
4.1. Intel Platform Installation (LGA1200/115X/17XX/1851)
- Attach Mounting Bracket: Secure the mounting bracket (D) to the cold head using the cold plate mounting screws (J).
- Install Back Panel: Adjust the Intel backplate (C) to the corresponding hole position on the motherboard and install the Intel spacers (F) into the backplate.
- Prepare CPU: Remove the protective film from the cold plate and apply thermal paste (H) evenly onto the CPU surface.
- Mount Cold Head: Place the cold head onto the CPU, aligning the mounting holes. Tighten the nuts (G) in a cross-pattern order with a screwdriver until secure.
- Install Screen Assembly: Carefully attach the screen assembly (B) to the cold head.
- Connect Wiring:
- Connect the 4-pin power supply interface from the cold head to the motherboard's AIO/PUMP pin.
- Connect the fan's 4-pin PWM power supply line to the motherboard's CPU-FAN pin.
- Connect the ARGB cable to the corresponding 5V ARGB pin on the motherboard.
- Connect the USB cable from the cold head to the motherboard's USB pin.
Refer to the PDF manual for a detailed wiring diagram.
- Secure Radiator: Mount the radiator (A) to your PC chassis using the case screws (I). Ensure proper airflow direction.
4.2. AMD Platform Installation (AM4/AM5)
- Attach Mounting Bracket: Secure the mounting bracket (D) to the cold head using the cold plate mounting screws (J).
- Install AMD Spacers: Install the AMD spacers (E) and AMD mounting screws (K) onto the motherboard's CPU socket area.
- Prepare CPU: Remove the protective film from the cold plate and apply thermal paste (H) evenly onto the CPU surface.
- Mount Cold Head: Place the cold head onto the CPU, aligning the mounting holes. Tighten the nuts (G) in a cross-pattern order with a screwdriver until secure.
- Install Screen Assembly: Carefully attach the screen assembly (B) to the cold head.
- Connect Wiring:
- Connect the 4-pin power supply interface from the cold head to the motherboard's AIO/PUMP pin.
- Connect the fan's 4-pin PWM power supply line to the motherboard's CPU-FAN pin.
- Connect the ARGB cable to the corresponding 5V ARGB pin on the motherboard.
- Connect the USB cable from the cold head to the motherboard's USB pin.
Refer to the PDF manual for a detailed wiring diagram.
- Secure Radiator: Mount the radiator (A) to your PC chassis using the case screws (I). Ensure proper airflow direction.
5. Operating Instructions
5.1. Screen Display Control Software
The Jonsbo TM-360E features a 3.95-inch IPS screen display on the cold head, which can be customized and monitored using the JONSBO-AIO software. This software allows you to:
- Monitor hardware parameters in real-time (e.g., CPU temperature, GPU frequency, memory usage).
- Customize display content, including pre-set themes.
- Upload custom GIF, JPG, or MP4 content for display.
The software supports various screen sizes and automatically recognizes the Jonsbo AIO device. It is compatible with Windows 10 and later operating systems.
Software Download: You can download the latest JONSBO-AIO software from the official Jonsbo website: https://www.jonsbo.com/en/products/TM.html
5.2. ARGB Lighting Control
The ARGB lighting on the radiator and fans can be controlled via the motherboard's 5V ARGB header and compatible software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync) or through the JONSBO-AIO software if it offers integrated ARGB control.
6. Specifications
Below are the detailed specifications for the Jonsbo TM-360E Water-cooled Radiator:
| Feature | Specification |
|---|---|
| Model | TM-360E Black/White |
| Product Type | Screen Display Water-cooled Radiator (AIO) |
| Radiator Size | 360mm (397mm x 120mm x 27mm) |
| Water Pump Dimensions | 85mm x 86.5mm x 70.2mm |
| Fan Dimensions | 362mm x 123mm x 28mm (for combined fan unit) |
| Fan Speed | 700rpm~1800rpm (± 10%) |
| Fan Air Volume (each) | 18.75-47.71 CFM |
| Fan Pressure | 0.33-1.86 mmH2O |
| Fan Noise | 16.4-30.7 dB(A) (max) |
| Fan Lifespan | ≥ 20000h (at 25 ℃ Room Temp) |
| Fan Interface | 4PIN PWM / 3PIN ARGB (5V) |
| Pump Speed | 5000rpm (± 10%) |
| Water Pump Voltage | 12V DC |
| Water Pump Power Consumption | 3.84W (± 10%) |
| D-TDP | 325W |
| Supported CPU Sockets | Intel LGA1200/115X/17XX/1851; AMD AM4/AM5 |
| Heatsink Material | Aluminum |
| Copper Base Area | 56.2 x 54.2 mm |
| Water Pipe Material | EPDM+IIR (Resistant to bending and aging) |
| Screen Type | 3.95" IPS Square LCD |
| Screen Resolution | 480x480 DPI |
| Screen Brightness | 400 cd/m² |
| Screen Refresh Rate | 60Hz |
| Certification | CE, RoHS |
| Package Weight | 2.8 kg |
| Package Dimensions | 52 cm (L) x 26 cm (W) x 18 cm (H) |
7. Maintenance
- Dust Cleaning: Regularly clean the radiator fins and fan blades with compressed air to prevent dust buildup, which can impede cooling performance. Ensure fans are not spinning during cleaning.
- Thermal Paste: If you ever need to remount the cold head (e.g., for CPU upgrade), always clean off old thermal paste from both the CPU and the cold plate and apply a fresh layer.
- Cable Management: Ensure all cables are neatly routed and not interfering with fan operation or airflow.
- Liquid Check: While AIO coolers are sealed, periodically check for any signs of leaks around the tubing and fittings.
8. Troubleshooting
- No Display on Cold Head Screen:
- Ensure the USB cable from the cold head is securely connected to a motherboard USB header. Check the JONSBO-AIO software for any error messages or connection status. Restart the software or your system.
- Fans Not Spinning or ARGB Not Lighting Up:
- Verify that the 4-pin PWM fan cable and the 5V ARGB cable are correctly connected to the motherboard headers. Check your motherboard's BIOS/UEFI settings and ARGB control software for proper configuration.
- High CPU Temperatures:
- Confirm that the cold head is properly seated on the CPU and the mounting screws are tightened in a cross-pattern. Ensure thermal paste was applied correctly. Check fan and pump speeds in monitoring software (e.g., JONSBO-AIO, HWMonitor) to ensure they are operating at expected levels. Clean any dust from the radiator fins.
- Pump Noise:
- Some pump noise is normal. Ensure the pump is running at its optimal speed. If the noise is excessive or unusual, check for air bubbles in the loop by gently tilting your PC case. Ensure the pump is not running dry.
9. User Tips
- Optimal Airflow: When mounting the radiator, consider your case's airflow. Mounting it as an exhaust at the top or front intake can yield different thermal results. Experiment to find the best configuration for your system.
- Software Customization: Take advantage of the JONSBO-AIO software to personalize your screen display. Monitoring critical temperatures or displaying custom GIFs can enhance your PC experience.
- Cable Management: Plan your cable routing before installation to ensure a clean build and unobstructed airflow. The simplified wire materials and hidden design of the TM-360E help in this regard.
10. Warranty and Support
For warranty information, technical support, or further assistance, please visit the official Jonsbo website or contact their customer service. Keep your proof of purchase for warranty claims.
Official Website: www.jonsbo.com
Manufacturer: Dongguan Sibositong Industrial Co., Ltd.
No.5, Xinglong Lu, Sanzhong Village, Qingxi Town, Dongguan City, Guangdong Province, 523651, China
Specifications are subject to change without prior notice. Some trademarks may be claimed as the property of others.