ShanWan Q34B

Contents

ShanWan Q34B Wireless Bluetooth Gaming Controller

User Instruction Manual

1. Introduction

Thank you for choosing the ShanWan Q34B Wireless Bluetooth Gaming Controller. This manual provides detailed instructions on how to set up, operate, and maintain your controller to ensure an optimal gaming experience across multiple platforms including PC, Nintendo Switch, iOS, and Android devices.

2. Safety Information

WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years.

This product is intended for users aged 14 years and older. Adult supervision is recommended for younger users. Please read and follow all safety instructions to prevent injury or damage to the product.

  • Keep the product away from heat sources, direct sunlight, and water.
  • Do not bend, twist, or force any parts of the controller.
  • Remove all packaging materials carefully before first use. Keep plastic bags away from children to avoid suffocation.
  • Check the product for any damage before each use.

3. What's in the Box

Please check the package contents:

  • 1 x ShanWan Q34B Wireless Gaming Controller
  • 1 x Instruction Manual
  • (Type-C USB cable and 2.4G receiver may be sold separately or included depending on package variant)

4. Product Overview

The ShanWan Q34B controller is designed for precise control and an immersive gaming experience, featuring advanced technology for responsiveness and durability.

ShanWan Q34B Wireless Gaming Controller

Figure 1: ShanWan Q34B Controller Front View

Key Features:

  • Dual Hall Effect Joysticks: Provides precise, drift-free control with a 5 million cycle lifespan and 1000Hz report rate for low latency and high sensitivity.
  • Innovative Digital Triggers: Dual-hinge glue-dispensing digital triggers offer enhanced feel and quick command transmission.
  • 6-Axis Gyroscope: Built-in motion sensing for immersive gameplay, especially in Switch mode.
  • Dual Vibration Asymmetric Motors: Delivers nuanced and palpable vibration feedback for an enhanced gaming experience.
  • 2nd Generation Hanging D-pad: Four-axis linkage system eliminates dead zones for precise diagonal inputs.
  • Multi-Platform Compatibility: Seamlessly switch between PC, Nintendo Switch, iOS (13.0+), and Android (9.0+) devices.
  • Three Connection Modes: Supports Type-C USB wired, 2.4G receiver (sold separately), and Bluetooth connections.
  • Long-lasting Battery: Equipped with a 600mAh battery for extended gaming sessions.
Controller features: 6-axis gyroscope, Hall rocker, 1000Hz, Dual Motors, Digital Trigger

Figure 2: Overview of Controller Features

5. Setup Instructions

5.1 Charging the Controller

Before first use, fully charge the controller. Connect the controller to a USB power source (e.g., PC, USB wall adapter) using a Type-C USB cable. The charging indicator will show the charging status and turn off or change color when fully charged.

Controller rear view highlighting 600mAh battery

Figure 3: Controller with 600mAh Battery Indication

5.2 Connection Modes

The ShanWan Q34B supports three connection methods:

  1. Type-C USB Wired Connection: Connect the controller directly to your device (PC, Switch dock) using a Type-C USB cable.
  2. 2.4G Receiver Connection: (Receiver needs to be purchased separately) Plug the 2.4G USB receiver into your device. The controller will automatically connect.
  3. Bluetooth Connection: This is the primary wireless connection method for most devices.
Diagram showing Type-C USB Wired, 2.4G Receiver, and Bluetooth connection options

Figure 4: Three-Mode Connection Options

6. Operating Instructions

6.1 Switching Operating Modes (XSD 3-Speed Mode)

The controller features a mode switch on the back to select between X-Input, Switch, and HID modes. This allows for quick adaptation to different platforms.

Image showing the XSD mode switch on the back of the controller with X, S, D labels

Figure 5: Three-Speed Mode Switch

  • X Mode (X-INPUT / XBOX): For PC, Android (9.0+), iOS (13.0+), and Windows 10+. This mode supports native controller games and emulators.
  • S Mode (Switch Mode): For Nintendo Switch consoles. This mode defaults to Switch console controller motion sensing (gyroscopic control).
  • D Mode (HID Mode): Connect to the GamepadSpaceApp for various gameplay settings and operations.

6.2 Gyroscope Functionality

  • X-Mode: Input default has no motion sensing.
  • S-Mode: Switch mode default has Switch console controller motion sensing enabled.
Controller with visual effects indicating built-in gyroscope motion sensing

Figure 6: Built-in Gyroscope for Motion Sensing

6.3 GamepadSpace App

The GamepadSpace App (for HID Mode) allows you to customize your controller experience:

  • Remap buttons
  • Set rapid fire functions
  • Program macro combos
  • Adjust vibration intensity
  • Configure motion controls

Download the GamepadSpace App from your device's app store or by scanning the QR code provided in the product packaging (if available).

Screenshots of the GamepadSpace App interface for controller settings

Figure 7: GamepadSpace App Interface

7. Maintenance

  • Clean the controller with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Avoid exposing the controller to extreme temperatures, humidity, or direct sunlight.
  • Store the controller in a cool, dry place when not in use, preferably in its original packaging or a protective case.
  • Keep out of reach of small children.

8. Troubleshooting

If you encounter issues with your controller, try the following:

  • Controller not connecting: Ensure the controller is charged. Check that you are in the correct mode (X, S, or D) for your device. For Bluetooth, ensure your device's Bluetooth is on and the controller is in pairing mode.
  • Input lag or unresponsiveness: Ensure the controller is fully charged. Try moving closer to your device to reduce interference. For wired connections, ensure the cable is securely connected.
  • Buttons not responding: Try resetting the controller (if a reset button is available, usually a small pinhole on the back). Ensure no debris is lodged around the buttons.
  • Vibration not working: Check game settings to ensure vibration is enabled. Verify vibration settings within the GamepadSpace App if applicable.

9. Specifications

Product dimensions: 15.53cm width, 10.39cm height, 6.5cm depth

Figure 8: Product Dimensions

FeatureSpecification
Product BrandShanWan
Product NameWireless Gaming Controller
Product ModelQ34B
Working VoltageDC3.7V
Working Current (motor not rotating)10-40mA
SpecificationDC5V ---500mA
Sleep Current<5uA
Bluetooth Transmission Distance<=8M
Battery Capacity600mAh (some listings state 400mAh, refer to product packaging for exact capacity)
Standby Time60 days of fully charged storage
Dimensions (approx.)15.53cm (W) x 10.39cm (H) x 6.5cm (D)
Compatible PlatformsPC, Nintendo Switch, iOS (13.0+), Android (9.0+)
Interface TypeUSB, Bluetooth, 2.4G, Type C
Joystick Sensor Module Brand/TypeHall
Trigger Button TypeNONE (Digital Trigger)

10. User Tips

  • Regularly check the GamepadSpace App for firmware updates to ensure optimal performance and compatibility.
  • Experiment with different vibration settings in the app to find your preferred intensity for various game genres.
  • For competitive gaming, consider using the wired connection for the lowest possible latency.

11. Warranty and Support

For warranty claims or technical support, please contact the manufacturer or your point of purchase. Keep your proof of purchase for warranty services.

Manufacturer Information:

Company Name: Guangzhou Yingwang E-commerce Co., Ltd
Full Address: Room B800, 4th Floor, No. 25 Guangxing Road, NanshaDistrict, Guangzhou City, Guangdong Province, China
Email: 15217696696@163.com

EU Authorized Representative:

Company Name: MJCM SARL
Address: 78 avenue des Champs Elysees Bureau 326, PARIS, FR
Email: mjcm190928@gmail.com

For further details, please refer to the official user manual PDF available at this link.

© 2024 ShanWan. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.