Salange CMtripod20

Contents

Salange Projector Ceiling Mount Tray Instruction Manual

Model: CMtripod20

1. Introduction

The Salange Projector Ceiling Mount Tray (Model: CMtripod20) is designed to provide a versatile and secure mounting solution for your projector and other media devices. This mount offers adjustable height, flexible installation options, and integrated cable management to create a clean and professional setup in any environment, from home theaters to office spaces. Please read this manual carefully before installation and use to ensure proper setup and optimal performance.

2. Package Contents

Please verify that all components are present and in good condition before proceeding with installation.

  • 1 x Telescopic Projector Bracket (Vertical Pole)
  • 1 x Projector Tray (Anti-falling edge shelf)
  • Mounting Hardware (screws, anchors, nuts)
  • Instruction Manual (this document)
Salange Projector Mount with all components
Figure 1: All components included in the Salange Projector Mount package.

3. Specifications

FeatureSpecification
Model NumberCMtripod20
Brand NameSalange
MaterialMetal (implied by images)
ColorBlack (Note: SKU indicates 'Silver', but product images consistently show black.)
Mount TypeCeiling, Wall, or Wall+Ceiling
Adjustable Height (Ceiling Mount)Min: 30 cm (11.8 inches) ~ Max: 53.7 cm (21.1 inches)
Adjustable Height (Wall Mount)Min: 48.5 cm (19.1 inches) ~ Max: 72.5 cm (28.5 inches)
Tray Dimensions (L x W)31 cm (12.2 inches) x 29.2 cm (11.5 inches)
Tray Edge Height5 cm (1.97 inches)
Max Weight Capacity10 KG (22 LBS)
CompatibilityProjectors, Xbox, DVD Players, devices with 1/4-inch threaded connector
Package Length36 cm
Package Width33 cm
Package Height5 cm
Package Weight2.047 kg
Dimensions and weight capacity of the projector mount
Figure 2: Detailed dimensions and maximum weight capacity of the Salange Projector Mount.

4. Installation Guide

The Salange Projector Mount offers flexible installation options: ceiling mount, wall mount, or a combination of both. Ensure the mounting surface is sturdy enough to support the weight of the mount and your device.

4.1 Assembly of the Mount

  1. Attach the Projector Tray to the Vertical Pole: Align the holes on the projector tray with the corresponding holes on the lower part of the vertical telescopic pole. Secure them using the provided screws and a screwdriver. Ensure the tray is firmly attached and stable.
  2. Adjust the Vertical Pole Length: The vertical pole is telescopic. Adjust it to your desired length by loosening the screws, extending or retracting the inner pole, and then tightening the screws to lock it in place.
Video 1: Step-by-step assembly and installation demonstration of the Salange Projector Mount.
Assembling the projector tray to the vertical pole
Figure 3: Illustration of attaching the projector tray to the telescopic pole.
Adjusting the height of the telescopic pole
Figure 4: The telescopic design allows for easy height adjustment (Min: 300mm, Max: 540mm).

4.2 Mounting Options

Choose the installation method that best suits your needs:

  • Ceiling Mount: Attach the top plate of the vertical pole directly to a sturdy ceiling joist or appropriate ceiling anchor points using the provided hardware.
  • Wall Mount: Attach the vertical pole to a wall stud or appropriate wall anchors. The mount can be extended horizontally from the wall.
  • Wall-Ceiling Combo: A hybrid approach where the mount is secured to both the wall and ceiling for added stability, if applicable to your setup.
Three installation options: ceiling, wall, and wall-ceiling combo
Figure 5: Visual representation of the three available installation options.

Important: Always ensure the mounting surface can safely support the total weight of the mount and your device. Use appropriate anchors for your wall/ceiling material.

4.3 Placing Your Device

  1. Position the Projector: Carefully place your projector or other compatible device onto the tray. The anti-falling edges will help secure it.
  2. Secure with 1/4-inch Threaded Connector (Optional): If your device has a 1/4-inch threaded hole (common for projectors and cameras), you can use a compatible 1/4-inch screw (not included) to further secure it to the tray.
  3. Cable Management: Route all necessary cables (power, HDMI, etc.) through the designated channels within the vertical pole for a clean and organized appearance.
Concealed cable management for a clean setup
Figure 6: Cables can be routed through the mount's pole for a tidy installation.
Projector placed on the tray with anti-falling edges and heat dissipation holes
Figure 7: The tray features anti-falling edges for security and ventilation holes for heat dissipation.

5. Operation

5.1 Height Adjustment

To adjust the height of your projector, carefully loosen the locking screws on the vertical telescopic pole. Adjust the pole to the desired height, then securely tighten the screws to prevent slippage. Always support your device when making height adjustments.

5.2 Angle Adjustment

The projector tray allows for angle adjustment. Loosen the adjustment mechanism beneath the tray, tilt the tray to achieve the optimal projection angle, and then tighten the mechanism to lock it in place. This feature is particularly useful for correcting keystone effects or adapting to different viewing surfaces.

Adjustable angle feature of the projector tray
Figure 8: The tray can be tilted to adjust the projection angle.

5.3 Device Compatibility

This mount is widely compatible with various devices, including most projectors, Xbox consoles, DVD players, and other media devices that fit within the tray dimensions and weight limit. The 1/4-inch threaded connector offers additional securing for compatible devices.

Wide compatibility with various devices like projectors, Xbox, and DVD players
Figure 9: The mount supports a range of devices beyond just projectors.

6. Maintenance

  • Cleaning: Wipe the mount with a soft, dry cloth to remove dust. For stubborn marks, a slightly damp cloth can be used, followed by drying. Avoid abrasive cleaners or solvents.
  • Regular Checks: Periodically check all screws and connections to ensure they remain tight and secure. Re-tighten if necessary.
  • Weight Limit: Do not exceed the maximum weight capacity of 10 KG (22 LBS) to prevent damage to the mount or your device.

7. Troubleshooting

ProblemPossible CauseSolution
Mount feels unstable/wobblyLoose screws; improper installation; overloaded.Ensure all screws are tightened. Verify installation against instructions. Check device weight against capacity.
Difficulty adjusting height/angleLocking mechanism too tight; debris in mechanism.Loosen locking screws/mechanisms before adjusting. Clean any visible debris.
Projector sliding on trayNot using 1/4-inch screw (if compatible); device not centered.If your projector has a 1/4-inch thread, use a compatible screw to secure it. Ensure the device is centered on the tray.

8. User Tips

  • Optimal Viewing: Experiment with different heights and angles to find the perfect projection position for your space and screen size.
  • Cable Management: Utilize the internal cable routing to keep your setup looking neat and prevent accidental disconnections.
  • Ventilation: The tray's perforated design aids in heat dissipation. Ensure your projector's vents are not obstructed for optimal cooling.

9. Warranty and Support

For warranty information, technical support, or replacement parts, please contact Salange Official Store directly through your purchase platform. Keep your proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.