FYHXele FY24FHR

Contents

FYHXele 24 inch Touch Monitor User Manual

Model: FY24FHR

This manual provides essential information for the safe and efficient use of your FYHXele 24-inch Touch Monitor.

1. Safety Precautions

Read and observe the following warnings and information below:

  1. Before cleaning, always unplug your monitor. It is recommended that you use dry cloth or lightly damp cloth to clean your monitor. Dry cloth is, however, the safest. If using damp cloth, wait for your monitor to completely dry before plugging it in again.
  2. Do not use alcohol or ammonia-based cleaner and/or liquids to clean your monitor.
  3. This monitor features ventilation openings on the back of the unit. Avoid blocking these openings to prevent the monitor from overheating.
  4. Avoid placing this monitor near any heat sources, e.g., portable heaters or heating vents, as this may cause damage to your monitor.
  5. Do not spray cleaner and or any kind of liquid directly onto the monitor's screen or any part of the monitor.
  6. Do not insert anything into any part of the monitor especially the ventilation openings.
  7. Always make sure your monitor is placed on a secure, level surface to prevent it from falling and sustaining damage.
  8. Unplug your monitor during any extended periods of non-use.
  9. Do not place heavy items on the monitor or monitor cables.
  10. Do not attempt to disassemble or remove parts from the monitor. Any disassembly or modification not performed by an authorized technician can result in damage to the monitor and/or possible exposure to high voltage electricity which may lead to serious injury or death.

FYHXele shall not be held responsible for injury or damage of products or persons due to failure to adhere to the aforementioned precautions or any others noted hereafter.

Image Persistence

This product is not designed to have fixed image patterns on the screen for extended periods of time.

CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN.

To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.

A "bolt of lightning" indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering.

The "exclamation point" calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.

WARNING: To reduce the risk of fire and electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus.

2. Box Contents

Please check the package contents carefully. If any items are missing or damaged, please contact customer support.

  • Monitor x 1
  • Stand Stem and Stand Base x 1
  • M6*16mm Screws x 1 (for Stand Installation)
  • Power Cable x 1
  • DP Cable x 1
  • User Manual x 1 (This document, also available as PDF)

Note: Extra screws may be included as backup.

3. Product Overview

3.1 Monitor Buttons

The monitor features several buttons for navigation and control:

No.ButtonDescription
1MDisplay the OSD menu or enter sub-menus.
2▼Press to move down in the menus.
3▲Press to move up in the menus.
4EPress to exit.
5⏻Power on/off.

3.2 Monitor Ports

The monitor is equipped with various ports for connectivity:

Back view of the monitor showing HDMI, VGA, USB, and 3.5mm audio ports.

Image: Back view of the monitor highlighting the HDMI, VGA, USB, and 3.5mm audio ports for various connections.

  • DP (DisplayPort 1.4): Supports 1920*1080P resolution at 180Hz (Max).
  • HD-interface (HDTV 2.1): Supports 1920*1080P resolution at 180Hz (Max).
  • AUDIO OUT: Insert one end of the audio cable into an external audio source, e.g., speakers or headphones, to pass audio signals through the monitor.
  • USB Type-A Port: USB2.0, connect your USB devices.
  • DC: Insert the power cable to supply power to the monitor.

WARNING: Always use the appropriate power cord.

3.3 Indicator Light

The indicator light provides status information:

  • Solid blue light: Indicates power is on and the monitor is operating normally.
  • Flashing blue light: Indicates no video source, no horizontal or vertical signal has been detected, or voltage is low. Please ensure your computer is on and all video cables are fully inserted and/or connected.

Note: Indicator light functionality may vary for certain models.

4. Installation

  1. Open the package and take out the product with foam still attached. Gently place it on a desktop or table.
  2. Take out the base, insert the base into the stand, and lock one M6*16mm screw.
  3. Diagram showing the monitor stand assembly process.

    Image: Step-by-step diagram illustrating the assembly of the monitor stand and base.

  4. Use a little force to insert the stand assembly into the slot on the back of the monitor in parallel until you hear a "click" sound.
  5. Hold the stand riser with both hands firmly and lift the monitor. Then place the monitor in an upright position on a flat surface.

5. OSD Setup

The On-Screen Display (OSD) Menu is used to adjust your monitor's settings and appears on screen after turning on the monitor and pressing the M button.

When using the monitor for the first time, settings will automatically adjust to optimal settings according to your computer's configuration and parts etc.

  1. Press any one of the buttons (M, ▼, ▲, E, ⏻) to activate the navigation window.
  2. Press M to enter the OSD menu.
  3. Press ▼ or ▲ to browse functions.
    • Highlight the desired function, then press M to enter the sub-menu.
    • Press ▼ or ▲ to browse sub-menus, then press M to highlight the desired function.
    • Press ▼ or ▲ to highlight an option, then press M to confirm the settings and exit the current screen.
  4. Press E to exit the current screen.

5.2 OSD Menu Functions

Main MenuSub-MenuOptionsDescription
LuminanceBrightness0-100Adjust display brightness
Contrast0-100Adjust display contrast
ECO ModeStandard, Game, Internet, Movie, etc.Set visual mode
DCRON/OFFTurn dynamic contrast on/off
Over DriverON/OFFSet the Over driver function
Image SetupHDRON/OFFTurn on/off HDR function
AspectWideSet image aspect ratio to fullscreen
4:03Set image aspect ratio to 4:3
Color SetupColor Temp.Warm, Cool, User, NormalSet the display color temperature mode. Warm(5500K), Cool(7500K), Normal(6500K), User(set temperature by user)
RED0-100Customize the display screen RGB component according to preference
BLUE0-100
GREEN0-100
Low Blue ModeOff, Week, Medium, StrongSet blue light filtering level
LanguageEnglish, Nederlands, Français, Deutsch, 한국, Español, Pусский, Português, Italiano, Polski, 日本語, etc.Set OSD language
OSD SetupOSD H. Position0-100Adjust the OSD Horizontal position
OSD V. Position0-100Adjust the OSD Vertical position
Timeout0-60Adjust OSD display time
Transparency0-100Adjust OSD transparency
ResetNoneReset monitor configurations
ResetBlack Level0-100Adjust the black level value from 0 to 100.
Input SetHDMI,DPDP or HDMI signals input
ExtraMuteON/OFFTurn audio on/off
Volume0-100Adjust the volume
FreeSyncON/OFFTurn on/off FreeSync
MprtON/OFFTurn MPRT On or Off

Note: The functions of the OSD are subject to change due to version upgrades without prior notice.

6. Specifications

Detailed technical specifications for the FYHXele 24 inch Touch Monitor (Model FY24FHR):

Product parameters diagram showing dimensions and a table of specifications.

Image: Diagram illustrating the physical dimensions of the monitor and a table summarizing its key technical specifications.

ItemDetail
Model NumberFY24FHR
Screen Size23.8"
Viewing Angle178° (H) / 178° (V)
Aspect Ratio16:9
Resolution1920*1080P
Refresh Rate75Hz (Adaptive Sync)
LED IndicatorPower on: Blue (solid); Power saving: Red
BrightnessTypical: 250 cd/m²; Max: 300cd/m²
Default Color Temperature6500K
Color Gamut99% sRGB
Pixel Pitch0.2745 (H) x 0.2745 (V) mm [92PPI]
Response Time1ms (OD)
Display Colors16.7M colors (8 bits)
PortsDP x 1, HDTV x 1, USBx1, Audio output x 1
PowerAC100-240V 50 / 60Hz
AdapterDC12V, 4.0A
Power ConsumptionTypical: 20W; Max: 26W; Standby ≤ 0.5W
OSD LanguageEnglish, 简体中文, Nederlands, Français, Deutsch, 한국, Español, Pусский, Português, Turkce, Italiano, Polski, 日本語
Usage Temp.32°F~104°F (Operating), -4°F~ 140°F (Storage), 10-85% RH (Non-Condensing)
Tilt AngleForward 5°; Backward 15° (±2°)
VESA Mounting75 x 75 mm
Dimensions (with stand)21.2 x 12.6x 16.5 in (540 x 320 x 418mm)
Weight (with stand)3.4kg. / 7.5 lb. (with packaging)

7. Troubleshooting

The screen is blank

  • Press power button to turn the monitor on.
  • Confirm the brightness and contrast settings are set normally.
  • Check if the Indicator Light is flashing. If so, there is no signal from your video source.
  • If your source is a notebook or laptop, be sure that its settings are in mirror or extension mode and the device itself is powered on.

The image is out of focus

  • Ensure the video cable is inserted properly at both ends.

The screen is flashing

  • Try an alternative power source. Insufficient power may cause this issue.
  • Ensure devices such as non-shielded speakers, fluorescent lighting, AC transformers, table fans, etc., are a safe distance away from your screen to avoid magnetic disturbances.

The color bleeds or visual effects appear unusual.

  • If your screen is all red or blue, or any colors disappear, check to see that the cable is properly inserted. A loose connection can cause a bad signal.
  • Try connecting to another video source for comparison.

The screen appears to be scrolling, rolling, or moving unusually.

  • Check that your source frequency is within 48-170Hz.
  • Reconnect and ensure your video cable is secure.

The monitor needs cleaning

  • Make sure the monitor has been powered off before cleaning.
  • Always use soft, non-abrasive cloth when cleaning.
  • Use dry, non-abrasive cloth to gently remove debris or dust.
  • If necessary, lightly dampen a non-abrasive cloth with water and gently clean the surface.
  • Never use alcohol or ammonia-based cleaning solutions.
  • Never spray liquid directly onto any part of the monitor.

The indicator light does not work

  • Check if the power is on.
  • Check if the power line connected with power.

Cannot plug and play.

  • Inspect if the monitor is compatible with PC.
  • Inspect if the graphics card is compatible with the monitor.
  • Inspect if the pins in the interface are curved.

Dim image

  • Adjust the brightness and contrast ratio.

Light indicator is on or flashing, but there is no image displayed on screen

  • Check if the monitor power is on.
  • Check if the graphics card is installed properly.
  • Check if the signal line connects securely with your monitor.
  • Check if the pins in the interface are curved.

Color shortage (red, green, or blue)

  • Inspect if the pins in the interface are curved.

8. User Tips

While no specific user reviews or Q&A were provided, general tips for monitor usage often include:

  • Optimal Viewing Distance: Position the monitor at arm's length (about 20-40 inches or 50-100 cm) from your eyes to reduce eye strain.
  • Ergonomics: Ensure the top of the screen is at or slightly below eye level to maintain a comfortable neck posture.
  • Cable Management: Keep cables tidy to prevent accidental disconnections and maintain a clean workspace.
  • Regular Cleaning: Gently wipe the screen and bezel with a microfiber cloth to remove dust and fingerprints, ensuring optimal display clarity.
  • Power Saving: Utilize the monitor's power-saving features or turn it off when not in use for extended periods to conserve energy.

9. Warranty and Support

For more information, please contact us via email: support@fyhxele.com

Manufacturer: Shenzhen Fengyu Huaxin Technology Co., Ltd.

Address: Room 517, 5th Floor, Building D, Shanhaiyunhui, No. 1067, Bantian Xuegang, Longgang District, Shenzhen, Guangdong Province, China.

Website: www.fyhxele.com

A PDF version of this user manual is available for download on our website or can be requested via customer service.

© 2023 FYHXele. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.