MEKEDE Car Stereo for BMW X3 F25 X4 F26 (2011-2016)

Contents

MEKEDE Car Stereo User Manual

For BMW X3 F25 / X4 F26 (2011-2016)

Thank you for purchasing the MEKEDE Car Stereo. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure proper use and optimal performance of your device. Please read it thoroughly before use.

1. Setup and Installation

1.1 Package Contents

Verify that all items listed below are included in your package:

Package Contents: Power Cable, Machine, RCA Cable, 4G Antenna, WIFI Antenna, USB Cable, GPS Antenna, MIC and connector, AUX Cable, 4G SIM card slot, Speaker

Image description: A visual representation of all components included in the package, laid out neatly. These include the main head unit, various cables (power, RCA, USB, AUX), antennas (4G, WiFi, GPS), a microphone with connector, a 4G SIM card slot, and a speaker.

  1. Power cord
  2. VIDEO RCA cable
  3. MIC External microphone cable
  4. USB cable
  5. SIM External SIM card cable
  6. GPS antenna
  7. 4G antenna
  8. WiFi antenna
  9. Audio connection cable

1.2 Machine Interface Overview

Familiarize yourself with the connection points on the back of the main unit:

Rear view of the car stereo showing numbered interfaces: Power Cord, RCA/360 Cable, External SIM, USB, NC, External Microphone, NC, LVDS Cable, GPS Antenna, 4G Antenna, WiFi Antenna.

Image description: A close-up view of the rear panel of the car stereo, highlighting various ports and connectors with numerical labels for identification.

  1. Power Cord Interface
  2. RCA Cable or 360 Cable Interface
  3. External SIM card slot cable interface
  4. USB Cable Interface
  5. NC (Not Connected)
  6. External microphone interface
  7. NC (Not Connected)
  8. LVDS Cable Interface (Connect the LVDS cable removed from the original car screen)
  9. GPS antenna interface
  10. 4G antenna interface
  11. WiFi antenna interface

1.3 Power Cord Wiring Method

Properly connect the power cord based on your vehicle's system.

For EVO Systems:

Wiring diagram for EVO system, showing connection of power cord from original car CD player to Android device.

Image description: A power cable harness with labels indicating connections. The main harness connects to the Android device, and a branch labeled 'NC' (Not Connected) is shown. The primary connection is from the original car CD player.

  • Transfer the power cord from the original car CD player to the Android device.
  • Ensure the 'NC' (Not Connected) points are correctly identified and left unconnected if applicable.

For CCC/CIC/NBT Systems:

Wiring diagram for CCC/CIC/NBT system, showing connection of power cord from original car CD player to Android device.

Image description: A power cable harness with labels indicating connections. The main harness connects to the Android device, and a branch labeled 'NC' (Not Connected) is shown. The primary connection is from the original car CD player.

  • Transfer the power cord from the original car CD player to the Android device.
  • Ensure the 'NC' (Not Connected) points are correctly identified and left unconnected if applicable.

Important Note: If there is an optical fiber cable on the power cord plug of the original vehicle CD player, it needs to be moved to the power cord plug of the Android device. Pay attention to the position and direction of the optical fiber cable during this transfer.

1.4 Installation Video Guide

Watch this video for a visual guide on the installation process and initial setup:

Video description: A demonstration of the car stereo's user interface, showing navigation through apps, music playback, video playback, dashboard display, settings, and changing UI themes. It also shows Bluetooth pairing and CarPlay connection.

2. Operating Instructions

2.1 Basic UI Navigation

The system features an intuitive Android OS interface. Navigate through applications, music, navigation, and settings by tapping on the respective icons on the QLED touchscreen. Swipe left or right to access additional screens or menus.

2.2 Wireless CarPlay and Android Auto

The unit supports both Wireless CarPlay and Wireless Android Auto for seamless smartphone integration.

Wireless CarPlay, Wireless Android Auto, and Mirror Link connection steps.

Image description: Visual instructions for connecting Wireless CarPlay, Wireless Android Auto, and Mirror Link. For CarPlay, it shows connecting Bluetooth and clicking 'ZLINKS'. For Android Auto, it shows connecting Bluetooth and clicking 'ZLINKS'. Both can also be connected via USB cable. Mirror Link supports both iPhone and Android phones.

  • Wireless CarPlay:
    1. Connect your iPhone to the car stereo's Bluetooth.
    2. On the car stereo, click on the "ZLINKS" application and wait for connection.
    3. CarPlay can also be connected via a USB cable.
  • Wireless Android Auto:
    1. Connect your Android phone to the car stereo's Bluetooth.
    2. On the car stereo, click on the "ZLINKS" application and wait for connection.
    3. Android Auto can also be connected via a USB cable.
  • Mirror Link: Supports wireless mirroring for iPhone and Android phones. Wired mirroring is also supported via USB.

2.3 Bluetooth Connectivity (Dual BT)

The unit features Dual BT, allowing you to connect your Android device's Bluetooth to the car's built-in Bluetooth system for wireless audio streaming and hands-free calls.

Dual Bluetooth connection for audio streaming and calls.

Image description: A diagram illustrating the dual Bluetooth connection, showing a smartphone wirelessly connected to the car stereo for audio streaming, eliminating the need for external AUX or USB cables.

  • Pairing: Go to the Bluetooth settings on your phone and search for the car stereo's Bluetooth name (e.g., GT6-BT-4FA0). Pair the devices.
  • Hands-Free Calls: Once connected, you can make and receive calls directly from the car stereo's interface.
  • Bluetooth Music: Stream audio from your phone to the car stereo wirelessly.

2.4 GPS Navigation

The built-in GPS receiver supports various navigation applications, providing real-time map display and accurate positioning.

GPS Navigation with various map applications like iGO, Sygic, Yandex, Google, AMAP, Navitel.

Image description: The car stereo display showing a map interface with various navigation app icons such as iGO, Sygic, Yandex, Google, AMAP, and Navitel, indicating built-in GPS functionality.

  • Access navigation apps from the main menu.
  • Enter your destination to receive real-time directions.

2.5 Car Information Display

The unit can display original car information such as speed, fuel level, oil pressure, and safety warnings on the dashboard.

Car Information Display showing speed, fuel level, oil pressure, temperature, parking brake, seat belt reminder, and door switch display.

Image description: The car stereo display showing various car information indicators like speed, fuel level, oil pressure, temperature, parking brake status, seat belt reminder, and door switch display, integrated into the Android interface.

2.6 UI Themes

The system offers multiple UI themes (ID9, ID8, ID7, ID6) that can be changed according to your preferences.

Multiple Styles of UI Themes: ID9, ID8, ID7, ID6.

Image description: A collage of four different user interface themes (ID9, ID8, ID7, ID6) displayed on the car stereo screen, showcasing various layouts and color schemes.

  • Navigate to System Settings > UI Configuration to select your preferred theme.

3. Troubleshooting

3.1 No Sound Problem

If you experience no sound from the car stereo:

Diagram showing how to connect the fiber optic cable and AUX cable to solve no sound problem.

Image description: A step-by-step visual guide on connecting the original car fiber optic cable to the conversion line interface and then to the host, and connecting the AUX audio cable to the car's AUX IN port.

  1. Check Fiber Optic Cable: Connect the original car fiber optic cable to the interface of the conversion line, and then connect to the host.
  2. Check AUX Connection: Connect the AUX audio cable from the car stereo to the car's AUX IN input.
  3. AUX Settings: Enter the original vehicle interface, select "Media" > "AUX" (for CCC/CIC/NBT) or "Bluetooth audio" (for EVO), then click the touchscreen or long-press the MENU key of iDrive to enter the Android interface and play music or videos.
  4. System Settings: Go to "Settings" > "System Settings" > "AUX Settings". Do not select "Auto-switch AUX"; choose "Custom" for the AUX switching scheme.

3.2 Original Vehicle Display Settings

If there is no signal, screen flickering, or incomplete display on the original interface:

Screenshot of the car stereo's main interface showing options like Music, Car Info, Modus, and Telephone.

Image description: A screenshot of the car stereo's main interface, displaying various function icons including Music, Car Info, Modus, and Telephone. The 'Car Info' section is highlighted, indicating where to click to access original vehicle information.

  1. LVDS Cable Check: Ensure the LVDS cable is properly connected. Remove any modified modules on the original vehicle's LVDS cable if present.
  2. CAN Protocol Options: If there is no sound from the original vehicle's FM radio, enter the factory settings to select the protocol. Navigate to "Settings" > "Factory Settings" > enter the password "1314" > "CAN Protocol Options". Select the CAN corresponding to the original vehicle system. After switching the protocol, press the RST key or reconnect the original vehicle's power cable and restart for it to take effect.

3.3 Screen Resolution Setup

To configure screen parameters:

Screenshot of screen resolution settings, showing how to enter factory settings and select adaptive resolution.

Image description: A screenshot of the car stereo's settings menu, showing the path to 'System Function Settings' then 'Factory' where a password '1314' is entered. Subsequently, options for 'Vehicle display' and 'Adaptive resolution' are shown, indicating the process to adjust screen parameters.

  1. Go to "Settings" > "Factory Settings" > enter the password "1314".
  2. Select "Original Car Display", click "Adaptive Resolution", and then click "Start".
  3. If the display shows success, click "Close".
  4. If "Start" for "Adaptive Resolution" cannot be clicked, manually select the screen parameters by sliding up and down the screen parameter options.
  5. If there is no display after these steps, turn off the device, reconnect the LVDS cable and the original car power cable, and then turn it on again.

3.4 Camera Settings and Wiring Method

For Original Car Camera or 360 Camera:

Screenshot of camera settings for original car camera or 360 camera.

Image description: A screenshot of the car stereo's system settings, specifically the 'Reversing settings' menu. It shows options for 'Camera Selection', where 'Original Car Camera' and '360 Panoramic Camera' can be selected.

  • Navigate to "Settings" > "System Settings" > "Reversing settings" > "Original Camera".

For Aftermarket Rear Camera:

Wiring diagram for aftermarket rear camera and screenshot of settings.

Image description: A wiring diagram for an aftermarket rear camera, showing connections for Android power cable, CAMERA +12, Rear Camera, and GND. Below it, a screenshot of the car stereo's 'Reversing settings' menu highlights 'Additional Camera' as the selection.

  • Navigate to "Settings" > "System Settings" > "Reversing settings" > "Aftermarket Camera".
  • Connect the aftermarket camera wiring as shown in the diagram: Android power cable, CAMERA +12, Rear Camera, and GND.

For Android Built-in 360 Camera:

Wiring diagram for Android built-in 360 camera and screenshot of settings.

Image description: A wiring diagram for an Android built-in 360 camera system, showing multiple camera inputs. Below it, a screenshot of the car stereo's 'Reversing settings' menu highlights 'Android360' and resolution options (1080P, 720P).

  • Navigate to "Settings" > "System Settings" > "Reversing settings" > "Android 360" > "1080P".
  • Connect the 360 camera wiring as shown in the diagram.

3.5 Reversing Interface Cannot Be Exited

If the reversing interface remains active after shifting out of reverse:

Image showing a car's radar button.

Image description: A close-up of a car's dashboard button, specifically the radar button, which needs to be turned off to exit the reversing interface.

  • Turn off the original vehicle radar button.
  • Additionally, enter the "Gear Selection" in the "Vehicle" option within the factory settings, and try each of the three gear types one by one to find the correct setting.

3.6 Device Doesn't Shut Down or Knob Doesn't Work

If the device remains on or the control knob is unresponsive:

  1. Modified Modules: Check whether there are any modified modules in the original vehicle power cord. If there are, remove them.
  2. Fiber Optic Cable: Verify that the fiber optic cable has been correctly moved to the Android power cord plug.
  3. CAN Protocol: Enter "CAN protocol option" in the factory settings. After switching the protocol, press the RST key or reconnect the power cord of the original vehicle and restart to make it effective.

4. Specifications

The MEKEDE Car Stereo is available in different configurations, primarily distinguished by the Snapdragon processor (668 or 680) and memory/storage options. Below are the general specifications:

Comparison table of Snapdragon 668 vs 680 specifications.

Image description: A detailed comparison table outlining the differences between Snapdragon 668 and Snapdragon 680 versions of the car stereo, including CPU, 360 Camera support, Core count, RAM/ROM, Screen type, Resolution, FinFET process, Bluetooth version, CarPlay, Android Auto, and Mirror Link capabilities.

FeatureSnapdragon 668 VersionSnapdragon 680 Version
SystemAndroid OS (SD668: Android 13, SD680: Android 14)
CPU4*2.0GHz + 4*1.8GHz4*2.4GHz + 4*1.9GHz
Core8-Core
RAM/ROM6+64GB8+128GB
ScreenQLED Screen
Resolution1920*720
FinFET11nm6nm
BTBT5.0BT5.1
CarPlayWireless / Wired
Android AutoWireless / Wired
Mirror LinkWireless / Wired
360 CameraBuilt in 360IC (Supports 360 camera, needs to be purchased separately)

4.1 General Specifications

AttributeValue
Is Itself AccessoriesNo
Tuner TypeFM/AM
Built-in DVD Playerno
Built-in CD playerno
Is touch screenYes
Built-in ScreenYes
Categorycar radio Multimedia Player
TF/Micro SD Slot0
DinDouble Din
RAM8G
Interfaceplug and play
Operating SystemAndroid
Out Power4*45
Voltage12 V
Item Weight2.7kg
Item Size10.25inch 12.3inch
Output TypeColored
Max External Memory128G
Special Featureswifi function,Support 4G Network,Support Can-Bus,Built-in GPS,Mobile Phone,MP3 players,dsp,CarPlay,android auto,Reversing Input,Split Screen,Support steering wheel control
Digital Media FormatMp3,MP4,JPEG
OSD LanguageChinese (Simplified),Chinese (Traditional),Arabic,Irish,Icelandic,Polish,Danish,German,Russian,French,Filipino,Finnish,czech,Latvian,Romanian,Malay,Norwegian,Portuguese,Japanese,Swedish,Serbian,Slovak,Slovenian,THAI,Ukrainian,Hebrew,Greek,Spanish,Italian,Urdu India,English,Vietnamese
Resolution1920*720
Display Size10.25,12.3’’
OriginMainland China
Accessory Typeframe and cable
CertificationCE
MaterialPlastic Hardware

5. User Tips

  • 360 Camera Calibration: Some users have noted that the password for the 360 camera calibration function is not readily available. If you encounter this, please contact customer support for assistance.
  • Professional Installation: For optimal performance and to avoid potential damage, it is recommended to have the car stereo installed by a professional car service technician.

6. Warranty and Support

This product comes with a 1-year manufacturer's warranty, covering defects in materials and workmanship. Accessories are not included in the warranty.

MEKEDE is committed to continuous improvement. We offer free firmware, software, user interface, and GPS navigation map updates to enhance your experience. Please check the official website or contact customer support for the latest updates.

For further detailed instructions and diagrams, you may refer to the comprehensive user manual available in PDF format: View User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.