1. Introduction
The Hieha L8 Smart Air Pump is a versatile 4-in-1 device designed for automotive emergencies and outdoor use. It combines a powerful 4000A peak current jump starter, a 150PSI smart air compressor, a 15000mAh portable power bank, and a multi-mode LED emergency flashlight. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting of your device.
2. Safety Information
Please read all safety warnings and instructions carefully before use to prevent electric shock, explosion, fire, and/or serious injury.
- Always connect the positive (+) clamp (red) to the positive (+) terminal of the vehicle battery and the negative (-) clamp (black) to the negative (-) terminal. A green light on the smart clip indicates a proper connection.
- Incorrect connection will trigger a red warning light and an audible buzzer as a safety alert. Disconnect immediately and re-check connections.
- Do not use the air pump function continuously for more than 6 minutes to avoid overheating. The product is designed with over-temperature protection and will automatically stop after 6 minutes of continuous inflation. It can be restarted manually after cooling down.
- Light vapor during air pump operation is normal due to the heating of the internal lubricating fluid.
- Do not use the device in high-temperature environments, near flammable materials, or in poorly ventilated areas.
- If you notice excessive heat, unusual odor, continuous alarms, or any malfunction, stop use immediately and contact customer support.
- The device features 6 jumper cable protections: Overload Protection, Low Voltage Protection, High Voltage Protection, Reversed Protection, High Temperature Protection, and Short Circuit Protection.
3. Package Contents
Verify that all items are present in your package:
- 1 x Hieha L8 Smart Air Pump (Jump Air Pump)
- 1 x Air Tube (60cm/23.6in)
- 1 x Inflating Needle
- 1 x Inflatable Nozzle
- 1 x Pesta Valve
- 1 x Emergency Start Power Clip (Jumper Cables)
- 1 x Type C Cable
- 1 x User Manual (PDF available online: View PDF)
4. Specifications
| Feature | Specification |
|---|---|
| Model Number | L8 Smart Air Pump |
| Nominal Capacity | 15000mAh (60C Power Polymer Battery) |
| Battery Type | Li-Ion |
| Peak Current | 4000A |
| Rated Voltage | 12V |
| Engine Compatibility | Up to 8.0L Gasoline / 7.0L Diesel (including hybrid power) |
| Inflation Range | 0-150 PSI |
| Airflow | 8L/Min |
| Power Bank Input | 5V/1A (Type-C: 5V-3A, 9V-2A) |
| Power Bank Output | 12V/2A (USB: QC3.0) |
| Charging Time (Device) | Approx. 2-3 hours |
| LED Flashlight | 300-lumen, 4 modes (Constant, Flash, SOS, Warning) |
| Working Temperature | -20°C to 70°C (-4°F to 158°F) |
| Material | ABS+PC |
| Certification | UL, RoHS, FCC, CE |
5. Setup
5.1 Initial Charging
Before first use, fully charge the Hieha L8 Smart Air Pump. Connect the provided Type-C cable to the device's input port and a suitable USB power adapter (not included). The LCD display will indicate charging status. A full charge typically takes 2-3 hours.
5.2 Device Overview
Familiarize yourself with the device's buttons and ports:
- LCD Display: Shows battery level, pressure readings (PSI, BAR, KPA, Kg/cm²), and operational status.
- Power Button: Turns the device on/off.
- Light Button: Controls the LED flashlight modes.
- Settings Button: Adjusts inflation modes and units.
- '+' / '-' Buttons: Adjusts target pressure for inflation.
- Air Outlet: For connecting the air tube.
- USB Output Port: For charging external devices.
- Type-C Input/Output Port: For charging the device or external devices.
6. Operating Instructions
6.1 Jump Starting a Vehicle
Ensure the device is sufficiently charged (at least 80% battery capacity recommended for optimal performance).
- Connect Clamps: Attach the red (+) clamp of the Emergency Start Power Clip to the positive (+) terminal of the vehicle battery. Attach the black (-) clamp to the negative (-) terminal of the vehicle battery. The smart clip will indicate a correct connection with a green light.
- Power On: Turn on the Hieha L8 Smart Air Pump.
- Start Vehicle: Start your vehicle's engine. If it doesn't start immediately, wait 30 seconds before trying again. Do not attempt more than 3 consecutive jump starts.
- Power Off & Disconnect: Once the vehicle starts, immediately disconnect the black (-) clamp first, then the red (+) clamp from the vehicle battery. Turn off the Hieha L8 Smart Air Pump.
This device is suitable for 12V vehicles with up to 8.0L gasoline engines or 7.0L diesel engines.
6.2 Using the Air Compressor (Tire Inflator)
The smart air compressor provides fast and accurate inflation with auto shut-off.
- Connect Air Tube: Screw the air tube onto the device's air outlet.
- Attach Nozzle: Select the appropriate nozzle (e.g., for car tires, bicycle tires, basketballs) and attach it to the other end of the air tube.
- Connect to Item: Connect the nozzle securely to the item you wish to inflate. The LCD display will show the current pressure.
- Set Target Pressure: Use the '+' and '-' buttons to set your desired pressure. Press the 'Settings' button to cycle through inflation modes (car, motorcycle, bicycle, ball) and pressure units (PSI, BAR, KPA, Kg/cm²).
- Start Inflation: Press the Power button to start inflation. The device will automatically stop once the preset pressure is reached.
- Disconnect: Disconnect the nozzle from the item and then the air tube from the device.
Note:
- Do not exceed 6 minutes of continuous inflation. Allow the device to cool down if it becomes hot.
- The device does NOT SUPPORT heavy-duty truck tires.
6.3 Using as a Power Bank
The 15000mAh power bank can charge your electronic devices.
- Connect Device: Connect your smartphone, tablet, or other USB-powered device to the USB output port or the Type-C port on the Hieha L8 Smart Air Pump using an appropriate charging cable.
- Start Charging: The device should automatically begin charging.
Output:
- USB: QC3.0 (Fast Charging)
- Type-C: 5V-3A, 9V-2A
6.4 Using the LED Flashlight
The integrated 300-lumen LED flashlight has four lighting modes for various emergency situations.
- Constant Lighting: Press the light button once for a steady white light.
- Slow Red Flash: Press the light button again for a slow red flashing light.
- Slow Blue Flash: Press the light button a third time for a slow blue flashing light.
- Quick Red & Blue Flash (Warning/SOS): Press the light button a fourth time for both red and blue lights to flash quickly.
- Turn Off: Press the light button a fifth time to turn off the light.
7. Maintenance
- Cleaning: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. Ensure it is fully charged before long-term storage.
- Battery Care: For optimal battery life, recharge the device every 3-6 months, even if not in use.
- Air Compressor: If the tire battery compressor becomes seriously hot, cool down for a few minutes before continuing to inflate.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Battery is depleted. | Charge the device fully. |
| Vehicle does not jump start. | Incorrect clamp connection; Vehicle battery too low; Engine too large. | Check clamp connections (ensure green light); Ensure device is fully charged; Verify engine size compatibility (max 8.0L Gas / 7.0L Diesel). |
| Red light/buzzer during jump start. | Incorrect clamp connection (reversed polarity). | Immediately disconnect clamps and re-attach correctly (red to positive, black to negative). |
| Air compressor stops or overheats. | Continuous use for over 6 minutes; High ambient temperature. | Allow the device to cool down for several minutes before resuming inflation. |
| Power bank not charging devices. | Device battery low; Incorrect cable/port. | Charge the Hieha L8 Smart Air Pump; Ensure correct cable and port are used. |
9. User Tips
- This unit is surprisingly powerful for its size and can easily jump-start larger vehicles like diesel pickup trucks.
- The multifunctional design (jump starter, tire pump, power bank, emergency light) makes it a highly practical tool for any vehicle owner.
- The build quality, including thick pure copper clips, contributes to reliable performance with no sparks during jump-starting.
- Keep the device in your car for peace of mind, especially for road trips or emergency situations.
- Its lightweight and compact size make it easy to carry and store without taking up much space.
- The fast-charging capability for both the device itself and external electronics is a significant advantage.
- The bright LED flashlight is very useful for outdoor activities, roadside emergencies, and power failures.
10. Warranty and Support
The Hieha L8 Smart Air Pump comes with an 18-month warranty and lifetime technical support. If you have any after-sales questions or require assistance with your jump starter, please feel free to contact customer support.
For detailed information, please refer to the official User Manual PDF: View PDF