Introduction
The Hieha L8 Smart Air Pump is a versatile 4-in-1 emergency device designed to provide essential assistance for your vehicle and electronic devices. It combines a powerful car jump starter, a 150PSI tire inflator, a high-capacity power bank, and a multi-mode LED flashlight into a single, compact unit. This manual provides detailed instructions for safe and effective use, maintenance, and troubleshooting.


Safety Information
Please read all safety warnings and instructions before using this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
- Always ensure proper polarity when connecting the jump starter cables to the vehicle battery.
- Do not allow the red and black clamps to touch each other once connected to the jump starter.
- Do not jump start a frozen battery.
- Do not use the jump starter if the battery clamps or cables are damaged.
- Keep out of reach of children.
- Operate in a well-ventilated area.
- The device features 10 safety protection systems including spark protection, reverse polarity protection, over-current protection, over-voltage protection, and over-temperature protection.

Package Contents
Verify that all items are present in your package:
- HIEHA 4-in-1 Jump Starter (L8 Smart Air Pump)
- Smart Jumper Cables
- Air Hose
- 3 Inflation Nozzles
- USB-C Cable
- Car Adapter
- Carrying Case
Specifications
| Attribute | Value |
|---|---|
| Product Name | L8 Smart Air Pump |
| Brand Name | MLHJ (HIEHA) |
| Model Number | L8 Smart Air Pump |
| Nominal Capacity | 8000mAh |
| 60C Power Polymer Battery | 15000mAh |
| Instantaneous Current | 4000A (Peak) |
| Voltage | 11.2V-16.8V |
| Rated Voltage | 12V |
| Working Voltage | 15V |
| Protection Voltage | 11.2V/16.8V |
| Charging Voltage | DC 12V |
| Charging Time | About 2-3 hours |
| Type | Li-Ion |
| Application | Air Pump, Car Jump Starter |
| Inflation Range | 0-150 PSI |
| Reverse Output | 5V/1A (USB-A) |
| Over current Protection | 10A |
| Operation Method | Button Operation |
| Material | ABS+PC |
| Weight | 1000g (1kg) |
| Working Temperature | -20°C to 70°C |
| Over-temperature Protection | Continuously inflating for 6 minutes, the product is forced to stop (can be restarted manually) |
| Certification | UL, RoHS, FCC, CE |
Setup
Charging the Jump Starter
Before first use, fully charge the Hieha L8 Smart Air Pump. It is recommended to recharge the device every 3-6 months to maintain battery health, especially if not used frequently.
- Connect the provided USB-C cable to the USB-C charging port on the jump starter.
- Connect the other end of the USB-C cable to the car adapter or a compatible USB wall adapter (not included).
- The display will indicate charging status. A full charge typically takes 2-3 hours.
Preparing for Use
Ensure the jump starter is fully charged before attempting to jump start a vehicle or inflate tires.
Operating Instructions
1. Jump Starting a Vehicle
Use this function to start 12V vehicles with gasoline engines up to 8.0L and diesel engines up to 7.0L.
- Ensure the jump starter is sufficiently charged.
- Connect the smart jumper cables to the jump starter's output port.
- Attach the red (+) clamp to the positive (+) terminal of the vehicle's dead battery.
- Attach the black (-) clamp to the negative (-) terminal of the vehicle's dead battery.
- Once correctly connected, the indicator light on the smart jumper cable will turn green, signaling it's ready to start. If connected incorrectly, it will provide a warning signal (e.g., red light or beep) due to reverse polarity protection.
- Start your vehicle's engine.
- Once the engine starts, immediately remove the jumper cables from the vehicle battery, first the black (-) clamp, then the red (+) clamp.
- Disconnect the smart jumper cables from the jump starter.

Video 1: Product Demonstration including Jump Starting and Air Inflation
2. Using the Air Compressor (Tire Inflator)
The built-in air compressor can inflate tires up to 150 PSI and features an automatic shut-off.
- Connect the air hose to the inflation port on the jump starter.
- Attach the other end of the air hose to the tire valve.
- Turn on the jump starter and select the desired unit (PSI, BAR, KPA, Kg/cm²) using the mode button.
- Use the '+' and '-' buttons to set the target pressure.
- Press the start button to begin inflation. The compressor will automatically stop once the preset pressure is reached.
- For other inflatables, use the appropriate inflation nozzle.


3. Using as a Power Bank
The 15000mAh power bank can charge your electronic devices.
- Connect your device's charging cable to the USB-A output port (5V/1A) or the USB-C port on the jump starter.
- The jump starter will automatically begin charging your device.

4. Using the LED Flashlight
The integrated LED flashlight offers multiple modes for various situations.
- Press the flashlight button to cycle through modes: White Light (Normal), Strobe Light, Red Warning Light, and SOS Signal.
- Press and hold the button to turn off the flashlight.

Maintenance
- Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Recharge the jump starter every 3-6 months to prolong battery life, even if not in use.
- Clean the exterior with a soft, damp cloth. Do not use harsh chemicals or abrasives.
- Ensure all ports are free from dust and debris.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Jump starter not turning on/charging | Low battery; faulty charging cable/adapter | Ensure the device is charged using the provided USB-C cable and a working adapter. |
| Vehicle not starting after jump start attempt | Incorrect cable connection; severely discharged battery; vehicle issue | Check cable connections (red to positive, black to negative). Ensure the smart cable indicator is green. If the battery is extremely low, allow a few minutes for a small charge before attempting again. If still no start, consult a mechanic. |
| Smart jumper cable indicator shows red/beeps | Reverse polarity connection; short circuit | Immediately disconnect the clamps and re-connect them ensuring correct polarity (red to positive, black to negative). The device has built-in protection for this. |
| Air compressor stops prematurely | Preset pressure reached; over-temperature protection activated | This is normal if the target pressure is met. If due to over-temperature (after ~6 minutes of continuous use), allow the device to cool down before restarting manually. |
| Phone/tablet not charging from power bank | Low jump starter battery; faulty USB cable; incompatible device | Ensure the jump starter is charged. Try a different USB cable or device. |
User Tips
- For jump starting, ensure the smart cable indicator turns green before attempting to start the vehicle. The built-in safety features provide peace of mind, even for first-time users, preventing damage from incorrect connections.
- When using the air compressor, utilize the automatic shut-off feature by setting your desired PSI. This eliminates the need to constantly monitor the inflation process.
- The 4000A peak current is powerful enough to start a wide range of vehicles, including 2.0T diesel engines, often on the first try and within 30 seconds.
- The 15000mAh power bank capacity is sufficient to charge multiple mobile devices, making it a reliable companion for long trips.
- The LED flashlight's SOS mode is particularly useful for emergencies or navigating in low-light conditions.
Warranty and Support
HIEHA provides a 2-Year Warranty for this product. Additionally, lifetime technical support and professional customer service are available to assist you with any questions or issues.
For detailed warranty information or technical assistance, please refer to the official user manual PDF available at: Hieha L8 Smart Air Pump User Manual (PDF).