NEOHIPO TP10

Contents

NEOHIPO TP10 Turntable Phono Preamplifier User Manual

Model: TP10

1. Introduction

The NEOHIPO TP10 is a compact and high-fidelity phono preamplifier designed to connect your turntable to an amplifier or active speakers. It features both RCA and 3.5mm headphone outputs, a low-noise processing circuit, and RIAA-compliant equalization for pristine sound quality. Its durable aluminum alloy body and user-friendly design make it an excellent choice for audiophiles.

NEOHIPO TP10 Phono Preamp for Turntable setup
The NEOHIPO TP10 Phono Preamp integrated into a turntable and speaker setup.

2. Key Features

  • High Signal-To-Noise Ratio: Delivers pristine sound quality with an SNR of ≥89dB, ensuring a tranquil listening experience.
  • Multi-Interface Output: Equipped with both RCA and 3.5mm headphone outputs for broad compatibility.
  • RIAA-Compliant: Adheres strictly to RIAA standards for accurate and lossless audio fidelity.
  • Aluminum Alloy Body: Lightweight, robust, and corrosion-resistant for enhanced durability and a stylish appearance.
  • User-Friendly Design: Features an intuitively placed volume knob and silicone anti-skid pads for stable and convenient operation.
  • Eye-Friendly Indicator Light: Carefully calibrated brightness for comfortable viewing, even during extended use.
Icons representing key features: RIAA standard, Low noise, Compact, Portable, Non-slip feet, Aluminum, Soft indicator, Headphone output
Typical features of hi-fi equipment, including RIAA compliance, low noise, and headphone output.

3. Package Contents

Please check the box for the following items:

  • 1 x NEOHIPO TP10 Phono Preamplifier
  • 1 x 12V Power Adapter
  • 1 x User Manual (PDF version available online)
Contents of the NEOHIPO TP10 package: TP10 phono preamplifier, 12V power adapter, and user manual.
What's included in the package.

4. Product Overview

Familiarize yourself with the components and interfaces of your TP10 Phono Preamplifier.

Front and Rear panel diagram of NEOHIPO TP10 with labels: Power indicator light, 3.5MM headphone jack, Volume adjustment button, Power switch, RCA output, Ground port, 12V power supply, RCA input.
Front and Rear Panel Layout with labeled ports and controls.
Detailed front and rear views of the NEOHIPO TP10 phono preamplifier.
Product Details: Front and Rear View.

5. Setup and Connection

Follow these steps to connect your TP10 Phono Preamplifier to your audio system.

  1. Connect Turntable: Connect the RCA output cables from your turntable to the 'MM INPUT' RCA jacks on the rear of the TP10.
  2. Connect Ground Wire: Attach the ground wire from your turntable to the 'GND' screw terminal on the TP10.
  3. Connect Output to Amplifier/Speakers:
    • RCA Output: Connect the 'OUTPUT' RCA jacks of the TP10 to an available line-level input (e.g., 'AUX', 'CD', 'LINE') on your amplifier or active speakers.
    • 3.5mm Headphone Output: For direct headphone listening, plug your 3.5mm headphones into the headphone jack on the front panel.
  4. Connect Power: Plug the 12V power adapter into the 'DC12V' port on the rear of the TP10, then plug the adapter into a wall outlet.
Connection diagram showing a vinyl turntable connected to the TP10 phono preamp, which then connects to either active speakers or an amplifier with passive speakers, and a 3.5mm headphone.
Connection Diagram for various audio setups.
Product demonstration video showing the TP10 in a home audio setup.

6. Operation

  1. Power On/Off: Press the power switch on the front panel to turn the unit on or off. The 'MODE' indicator light will illuminate when the unit is powered on.
  2. Volume Adjustment: Use the large knob on the top of the unit to adjust the output volume. The damping design of the knob prevents sudden changes in volume.
  3. Headphone Use: When headphones are plugged into the 3.5mm jack, the RCA outputs may be muted depending on the connected equipment. Adjust headphone volume using the main volume knob.
Close-up of a hand adjusting the convenient volume knob on the NEOHIPO TP10.
Convenient volume knob design for smooth operation.
Close-up of a 3.5mm headphone jack connected to the NEOHIPO TP10.
3.5mm headphone output jack for easy switching of output modes.

7. Specifications

ParameterValue
BrandNEOHIPO
ModelTP10
Channels2.0
Maximum Power Per ChannelNO POWER (Preamplifier)
OriginMainland China
CertificationCE
Frequency Response20Hz - 20KHz (±1.5dB)
Dynamic Range≥82dB
Signal to Noise Ratio≥82dB
Terminal Impedance100K
Input Sensitivity (MM turntable)5mV
Degree of Distortion0.015% (1 KHz 5 mV input)
Gain45db
Dimensions (approx.)7.7cm (W) x 2.5cm (H) x 7.7cm (D)
Product parameters table with Brand, Model, Signal-to-noise ratio, RIAA Standard, Distortion, Bottom Noise, and dimensions.
Detailed product parameters and dimensions.

8. Troubleshooting

No Sound Output:
  • Ensure all cables are securely connected to the correct input/output ports.
  • Verify the power adapter is properly connected and the unit is powered on (indicator light should be active).
  • Check the volume levels on both the TP10 and your connected amplifier/speakers.
  • Confirm your turntable is properly grounded to the TP10.
  • If using headphones, ensure they are fully plugged in and functioning correctly.
Humming or Buzzing Noise:
  • Ensure the turntable's ground wire is securely connected to the TP10's 'GND' terminal.
  • Check for any loose cable connections.
  • Move the TP10 and associated cables away from other electronic devices that might cause interference.
  • Try plugging the power adapter into a different electrical outlet.
Distorted Sound:
  • Ensure the volume is not set too high, causing clipping.
  • Verify that your turntable's output is compatible with a phono preamplifier (MM input).
  • Check the condition of your turntable's stylus and record.

9. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the exterior of the unit. Do not use liquid cleaners or solvents.
  • Placement: Place the unit on a stable, flat surface. Avoid placing it in direct sunlight, near heat sources, or in areas with high humidity.
  • Ventilation: Ensure adequate ventilation around the unit to prevent overheating.
  • Anti-slip feet: The silicone anti-slip pads on the bottom help maintain stability and protect surfaces.
Bottom view of the NEOHIPO TP10 showing its anti-slip feet design.
Anti-slip feet design for stability.

10. User Tips

  • For optimal sound quality, ensure all audio cables are of good quality and properly shielded.
  • Experiment with the placement of the preamp and cables to minimize any potential interference.
  • Always lower the volume before connecting or disconnecting headphones or other audio components to prevent sudden loud noises.
  • The compact size of the TP10 makes it easy to integrate into various setups, from studios to home theaters, without taking up much space.

11. Warranty and Support

For any questions, technical support, or warranty information, please refer to the official NEOHIPO website or contact your retailer. A digital version of this user manual is available for download at this link.

© 2024 NEOHIPO. All rights reserved.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.