1. Introduction
Thank you for choosing the Hieha 4-in-1 Portable Car Jump Starter. This versatile device combines a powerful jump starter, a 150PSI tire inflator, a 15000mAh power bank, and an emergency LED flashlight. Designed for convenience and safety, it's an essential tool for any vehicle owner, ensuring you're prepared for roadside emergencies and outdoor adventures.
Product demonstration video, showcasing jump-starting, air inflation, power bank, and LED light functions.
2. Safety Information
Please read all safety instructions carefully before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Do not operate the unit if it is damaged.
- Keep out of reach of children.
- Do not immerse the unit in water or expose it to rain.
- Do not disassemble the unit. Refer to qualified service personnel for repairs.
- Use only the provided smart jumper cables.
- Ensure proper polarity when connecting to a vehicle battery (Red to Positive, Black to Negative).
- Avoid short-circuiting the jumper clamps.
- Do not jump start a frozen battery.
- Do not use the air compressor continuously for more than 6 minutes to prevent overheating. Allow it to cool down before restarting.
- Store the unit in a cool, dry place away from direct sunlight.
3. Package Contents
- Hieha 4-in-1 Jump Starter Unit
- Smart Jumper Cables
- Air Hose
- 3 x Inflation Nozzles (for various inflatables)
- USB-C Charging Cable
- Car Adapter
- Carrying Case
- User Manual (this document)

Hieha 4000A Jump Starter unit with included accessories: jumper cables, air hose, various nozzles, and USB cable.
4. Product Features and Components

Detailed infographic covering all features, safety protections, and components of the Hieha Jump Starter.
- Jump Starter (4000A Peak): Capable of starting 12V vehicles with up to 8.0L gasoline engines and 7.0L diesel engines.
- Air Compressor (150PSI): Built-in tire inflator with digital display, auto shut-off, and various nozzles.
- Power Bank (15000mAh): Features USB-A output and USB-C input/output for charging mobile devices.
- LED Flashlight (400LM): Multiple modes including White Light, Strobe, Red Warning, and SOS.
- Smart Jumper Cables: Equipped with 10 safety protection systems (Spark-proof, Reverse Polarity, Over-Current, Over-Voltage, Over-Temperature, Low Voltage, Over Discharge, Short-Circuit, Overload).
- Digital Display: Shows battery level, air pressure, and operational status.
- Control Buttons: Power, Mode selection, Pressure adjustment, Light control.
5. Setup
5.1 Charging the Jump Starter Unit
Before first use, fully charge the Hieha Jump Starter. It is recommended to recharge the unit every 3-6 months to maintain battery health, even if not in use.
- Connect the provided USB-C charging cable to the USB-C port on the jump starter.
- Connect the other end of the USB-C cable to a USB wall adapter (not included) or a car adapter.
- The digital display will show the charging progress. The unit is fully charged when the display indicates 100%.
- Charging time is approximately 2-3 hours.
6. Operating Instructions
6.1 Jump Starting a Vehicle
Ensure the jump starter is at least 50% charged before attempting to jump start a vehicle.

Demonstrates jump-starting a car, showing 4000A peak, 50 starts, compatibility with all gas and 8.0L diesel engines.
- Turn off your vehicle's ignition and all accessories.
- Insert the blue plug of the smart jumper cables into the jump starter's 12V output port.
- Connect the RED (+) clamp to the positive (+) terminal of your vehicle's battery.
- Connect the BLACK (-) clamp to the negative (-) terminal of your vehicle's battery.
- Check the indicator light on the smart jumper cable:
- Solid Green: Ready to jump start.
- Solid Red with Beeping: Reverse polarity or short circuit detected. Disconnect and re-connect correctly.
- Flashing Green: Battery voltage too low. Press the 'BOOST' button on the smart cable for 3 seconds until it turns solid green, then jump start within 30 seconds.
- Start your vehicle.
- Once the vehicle starts, immediately remove the BLACK (-) clamp, then the RED (+) clamp from the battery.
- Disconnect the smart jumper cables from the jump starter.
6.2 Using the Air Compressor / Tire Inflator

Close-up of the 150PSI cordless inflator in use, highlighting fast inflation and overheat protection.
- Screw the air hose into the air outlet port on the jump starter.
- Attach the appropriate inflation nozzle to the air hose if needed (e.g., for bicycle tires, sports balls).
- Connect the air hose to the tire valve or inflatable item.
- Press the Power button to turn on the unit. The digital display will show the current pressure.
- Press the 'M' button to select the desired unit (PSI, BAR, KPA, kg/cm²).
- Use the '+' and '-' buttons to set the target pressure.
- Press the Start/Stop button to begin inflation. The compressor will automatically stop once the target pressure is reached.
- Disconnect the air hose and store it properly.
- Note: The air compressor has an over-temperature protection feature. If used continuously for 6 minutes, it will automatically stop. Allow it to cool down for a few minutes before restarting.
6.3 Using as a Power Bank

Shows the 8000mAh power bank function with Type-C and USB output ports charging various devices.
- Connect your device's USB charging cable to the USB-A output port or the USB-C port on the jump starter.
- The jump starter will automatically begin charging your device.
- The digital display will show the remaining battery capacity.
6.4 Using the LED Flashlight

Illustrates the three LED light modes: Normal, SOS, and Strobe for various emergency situations.
- Press and hold the Light button (sun icon) for 3 seconds to turn on the LED flashlight (Normal mode).
- Press the Light button again to cycle through the modes: Strobe > SOS > Red Warning Light.
- Press and hold the Light button for 3 seconds again to turn off the flashlight.
7. Maintenance
- Clean the unit with a dry, soft cloth. Do not use harsh chemicals or abrasive materials.
- Store the unit in its carrying case in a cool, dry place when not in use.
- Recharge the unit every 3-6 months to prolong battery life, even if it has not been used.
- Keep the charging ports and air outlet free from dust and debris.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on | Battery is depleted | Recharge the unit fully. |
| Vehicle does not start | Incorrect clamp connection Vehicle battery completely dead Jump starter battery too low | Check smart cable indicator for correct connection. Use 'BOOST' function if vehicle battery is very low. Ensure jump starter is at least 50% charged. |
| Air compressor stops working | Overheating protection activated | Allow the unit to cool down for several minutes before restarting. |
| Device not charging from power bank | Cable issue Jump starter battery too low | Try a different USB cable. Recharge the jump starter. |
9. Specifications
| Feature | Specification |
|---|---|
| Model Number | L8 Smart Air Pump |
| Peak Current | 4000A |
| Nominal Capacity | 8000mAh |
| Power Bank Capacity | 15000mAh (60C Power Polymer Battery) |
| Voltage | 11.2V-16.8V |
| Rated Voltage | 12V |
| Charging Voltage | DC 12V |
| Charging Time | Approx. 2-3 hours |
| Inflation Range | 0-150 PSI |
| Reverse Output | 5V/1A |
| Over Current Protection | 10A |
| Working Voltage | 15V |
| Working Temperature | -20°C to 70°C |
| Material | ABS+PC |
| Weight | 1000g |
| Certifications | UL, RoHS, FCC, CE |
10. User Tips
- For Camping & Outdoors: This unit is highly recommended for camping trips. Its robust battery can jump-start SUVs, inflate air mattresses, and provide ample light and charging for multiple devices like phones, cameras, and drones. Its waterproof and dustproof features make it reliable in various outdoor conditions.
- Everyday Convenience: Keep it in your trunk for peace of mind. It's lighter and more compact than expected, taking up minimal space. It's perfect for unexpected dead batteries or flat sports balls.
- Easy Jump Starting: The jump-starting process is straightforward. Just connect the clamps, wait for the